{"title":"All","description":null,"products":[{"product_id":"ds-19-k-6","title":"Dispensing hose, diesel hose, fuel hose, 3\/4 inch, 6 m, diesel, heating oil, 1 inch male thread","description":"\u003cp\u003eDispensing hose, diesel hose, tank hose, 3\/4 inch, 6 m, diesel, heating oil, 1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003e6 meter 3\/4 inch hose, pre-assembled with crimped 1 inch connections, 1 inch external thread on both sides\u003c\/p\u003e \n\n\u003cp\u003eThis pressure hose is suitable for conveying heating oil, gasoline, diesel, oils and greases with a max. aromatic content of 50%.\u003c\/p\u003e \n\n\u003cp\u003eWhen used with gasoline, the medium must not remain in the hose, but only be passed through. If you need a hose in which the gasoline remains after refueling, please ask us for a tanker hose for gasoline.\u003c\/p\u003e \n\n\n\u003cp\u003eWith the help of the optional swivel coupling shown, the handling of the fuel nozzle and tank hose is significantly facilitated.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying untangling of the hose is eliminated. This extends the life of the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the fuel nozzle and then connected to the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, it is also recommended to install this swivel screw connection at the pump outlet.\u003c\/p\u003e \n\n\u003cp\u003eFor insertion and sealing, we recommend using our thread sealant. The sealant is medium strength and re-releasable.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel coupling product can be found under the \"Hose accessories\" button.\u003c\/p\u003e \n\n\n\u003cp\u003eTechnical details:\u003c\/p\u003e \n\n\u003cp\u003e6 meter hose length 3\/4 inch\u003c\/p\u003e \n\n\u003cp\u003e1 inch external thread crimped on both sides\u003c\/p\u003e \n\n\u003cp\u003e3\/4 inch ID 19 mm\u003c\/p\u003e \n\n\u003cp\u003e27 mm OD\u003c\/p\u003e \n\n\u003cp\u003emax 10 bar operating pressure\u003c\/p\u003e \n\n\u003cp\u003eBursting pressure 30 bar\u003c\/p\u003e \n\n\u003cp\u003eTemperature range from -25° C\/+80° C for oil up to +100° C\u003c\/p\u003e \n\n\u003cp\u003eLining NBR black smooth\u003c\/p\u003e \n\n\u003cp\u003eCover NBR\/EPDM, black smooth, antistatic R\u0026lt;1MOhm\/m, abrasion resistant, oil, fuel and weather resistant\u003c\/p\u003e \n\n\u003cp\u003eReinforcements spiralized synthetic textile threads\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919083345,"sku":"DS-19-K-6","price":105.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Tankschlauch_7107f0f4-8772-4d4f-a153-04c6c66af77f.jpg?v=1757351881"},{"product_id":"svgsl-25","title":"Hose connector 25 mm, metal, galvanized steel, water, oil, diesel, heating oil, petrol","description":"\u003cp\u003e Hose connector 25 mm 1 inch, metal, galvanized steel, water, oil, diesel, heating oil, petrol\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 16 cm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle 60.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 25 - 26.3 - 26.4 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Inner diameter 21.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 183 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919116113,"sku":"SVGSL-25","price":6.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-Stahl-3.jpg?v=1757351883"},{"product_id":"svgs-12-10","title":"Hose connector reducer 12-10 mm, metal, petrol, oil, diesel, water, air","description":"\u003cp\u003eHose connector reducer AD 12\/10 made of metal for connecting hoses with ID 12\/10 mm.\u003c\/p\u003e\n\n\n\u003cp\u003e Media gasoline, oil, diesel, water, air\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 25 g\u003c\/p\u003e","brand":"Cohline GmbH Frau Eckhardt s.eckhardt@cohline.de","offers":[{"title":"Default Title","offer_id":51812919181649,"sku":"SVGS-12-10","price":4.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-reduzierend-12-10-mm-Metall_b3bcdcfc-39e2-43d9-8408-f1e68a13073e.jpg?v=1757351885"},{"product_id":"rsv-lose-18","title":"Check valve, diaphragm, spring, diesel, fuel, water, air, 18 mm OD","description":"\u003cp\u003e Check valve, diaphragm, spring, diesel, fuel, water, air, 18 mm OD\u003c\/p\u003e\n\n\n\u003cp\u003e This spring-loaded check valve works with an internal diaphragm as a sealing element.\u003c\/p\u003e\n\n\n\u003cp\u003e These check valves are suitable, for example, for building a tank ventilation system, as can be seen in the example photo.\u003c\/p\u003e\n\n\n\u003cp\u003e BOSCH 2.447.419.002\u003c\/p\u003e\n\n\n\n\u003cp\u003e Opening pressure 0.2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 18.2 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter rear body 12.87 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Total height 8.62 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Rear body height 5.47 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Sealing material NBR\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 6 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919247185,"sku":"RSV-lose-18","price":3.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Rueckschlagventil-Membrane.jpg?v=1757351887"},{"product_id":"rsvm-1-1-4","title":"Check valve 1 1\/4 inch, brass, stainless steel suction strainer, water","description":"\u003cp\u003e Check valve 1 1\/4 inch, brass, stainless steel suction strainer, water\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e 1 1\/4 inch internal thread on both sides\u003c\/p\u003e\n\n\n\u003cp\u003e max. temperature 110 °C\u003c\/p\u003e\n\n\n\u003cp\u003e max. operating pressure 10 bar\u003c\/p\u003e\n\n\n\u003cp\u003e plastic plate\u003c\/p\u003e\n\n\n\u003cp\u003e Suction basket stainless steel with plastic thread\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812919312721,"sku":"RSVM-1 1\/4","price":18.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Rueckschlagventil-Messing-Saugkorb-Edelstahl-1_5196de5d-e3d5-4c49-8958-fc3165384c2b.jpg?v=1757351889"},{"product_id":"d-14x1-5","title":"Sealing ring aluminum, for ring nipples, hollow screws, sealing plugs with 14x1.5","description":"\u003cp\u003e Sealing ring aluminum, for ring nipples, hollow screws, sealing plugs with 14x1.5\u003c\/p\u003e\n\n\n\u003cp\u003e Flat sealing ring according to DIN 7603\u003c\/p\u003e\n\n\n\u003cp\u003e Material: Aluminium 99.5 semi-hard corresponds to F 20 hardness 32-45 HB\u003c\/p\u003e\n\n\n\u003cp\u003e Operating temperature according to DIN max. + 200 ° C\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 0.5 g\u003c\/p\u003e","brand":"Schmitter AG bei Bestellung über web shop keine Versandkosten! Jürgen Feierfeil liefert mit GLS http:\/\/webshop.schmitter-hydraulik.de\/ Benutzer: BPeters Passwort: CCNS5HUZ","offers":[{"title":"Default Title","offer_id":51812919378257,"sku":"D-14x1,5","price":0.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Aluminium-Dichtring_3ccca223-48f2-436a-bdae-f398b3f79d4a.jpg?v=1757351891"},{"product_id":"handpumpe-kurbel-wasser-kit","title":"Hand pump water, crank pump, 200 l barrels, kit","description":"\u003cp\u003eHand Pump for Water, Crank Pump, 200 L Barrels, Kit\u003c\/p\u003e\n\n\u003cp\u003eWith this equipment, you can pump particle-free water independently of the power grid.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel casing, in particular, emphasizes its use in professional applications.\u003c\/p\u003e\n\n\u003cp\u003eThe volumetric flow rate is 38 liters per 100 revolutions.\u003c\/p\u003e\n\n\u003cp\u003eThis water crank pump is self-priming with simple and immediate delivery of the medium.\u003c\/p\u003e\n\n\u003cp\u003eThe suction tube is suitable for barrels from 60 - 200 liters.\u003c\/p\u003e\n\n\u003cp\u003eThe included barrel adapter fits into the openings of 200 L barrels.\u003c\/p\u003e\n\n\u003cp\u003eComplete with 2.50 m delivery hose and stainless steel spout.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e\n\n\u003cp\u003eMedium: Water, free of foreign substances and abrasive particles\u003c\/p\u003e\n\n\u003cp\u003e38 liters per 100 revolutions\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height: 1.5 m\u003c\/p\u003e\n\n\u003cp\u003eMax. delivery height: 5 m\u003c\/p\u003e\n\n\u003cp\u003eDelivery hose: 2.50 m\u003c\/p\u003e\n\n\u003cp\u003ePlug-in suction tube for 200 L barrels\u003c\/p\u003e\n\n\u003cp\u003eBarrel adapter: 2\" BSP, 56x4 and 70x6\u003c\/p\u003e\n\n\u003cp\u003eWeight: 3.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919443793,"sku":"Handpumpe-Kurbel-Wasser-Kit","price":180.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kurbelpumpe-Wasser_fbce85b2-32aa-42c9-9f39-30bb491b518e.jpg?v=1757351894"},{"product_id":"handpumpe-kurbel-frostschutz-kit","title":"Hand pump antifreeze, crank pump, 200 l drums, kit","description":"\u003cp\u003eHand Pump Antifreeze, Crank Pump, 200 L Drums, Kit\u003c\/p\u003e\n\n\u003cp\u003eWith this equipment, you can pump antifreeze independently of the power grid.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel casing, in particular, emphasizes its use in professional applications.\u003c\/p\u003e\n\n\u003cp\u003eThe full volumetric output is 38 liters per 100 revolutions.\u003c\/p\u003e\n\n\u003cp\u003eThe pump must be filled once with 150 ml of antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eAfter that, this antifreeze crank pump is self-priming with simple and immediate delivery of the medium.\u003c\/p\u003e\n\n\u003cp\u003eThe suction tube is suitable for 60 - 200 liter drums.\u003c\/p\u003e\n\n\u003cp\u003eThe included drum adapter fits into the openings of 200 L drums.\u003c\/p\u003e\n\n\u003cp\u003eComplete with 2.50 m discharge hose and stainless steel spout.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e\n\n\u003cp\u003eMedium: Antifreeze\u003c\/p\u003e\n\n\u003cp\u003e38 liters per 100 revolutions\u003c\/p\u003e\n\n\u003cp\u003eRotates clockwise only\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height: 1.5 m\u003c\/p\u003e\n\n\u003cp\u003eMax. discharge height: 5 m\u003c\/p\u003e\n\n\u003cp\u003eDischarge hose: 2.50 m\u003c\/p\u003e\n\n\u003cp\u003ePlug-in suction tube for 200 L drums\u003c\/p\u003e\n\n\u003cp\u003eDrum adapter: 2\" BSP, 56x4 and 70x6\u003c\/p\u003e\n\n\u003cp\u003eWeight: 3.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919476561,"sku":"Handpumpe-Kurbel-Frostschutz-Kit","price":180.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kurbelpumpe-Wasser_7f9ce8d4-b5db-4cb4-8b65-6cab604800d4.jpg?v=1757351898"},{"product_id":"fpm-230-32l-min-fass","title":"Drum pump 230 Volt max. 32 l\/min, diesel, heating oil, coolant, automatic nozzle","description":"\u003cp\u003eDrum pump 230 volt max. 32 l\/min, diesel, heating oil, coolant, automatic braided nozzle\u003c\/p\u003e\n\n\u003cp\u003eThe electric diesel pump is used for easy refueling of commercial vehicles.\u003c\/p\u003e \n\n\u003cp\u003eThese drum pumps deliver diesel and heating oil from barrels, tanks and containers. The centrifugal pump is also suitable for filling undiluted coolant.\u003c\/p\u003e\n\n\u003cp\u003eInstallation of our digital meter for low-viscosity liquids is optionally possible in the pressure line.\u003c\/p\u003e \n\n\n\u003cp\u003eThe set includes everything you need for immediate operation of the drum pump:\u003c\/p\u003e\n\n\u003cp\u003eDispensing hose 2 m\u003c\/p\u003e\n\n\u003cp\u003eSuction hose 1.60 m\u003c\/p\u003e\n\n\u003cp\u003eSuction bottom filter\u003c\/p\u003e\n\n\u003cp\u003eManual nozzle\u003c\/p\u003e\n\n\u003cp\u003eConnection cable with Schuko plug 2 m\u003c\/p\u003e\n\n\u003cp\u003eHose clamps and anti-kink spring\u003c\/p\u003e\n\n\n\u003cp\u003eMedium temperature min. 10 ºC max. 35 ºC\u003c\/p\u003e\n\n\u003cp\u003eDry running of the pump must be avoided.\u003c\/p\u003e\n\n\u003cp\u003eNoise level 70 dba\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height 2 m\u003c\/p\u003e\n\n\u003cp\u003eMax. dispensing hose length 6 m\u003c\/p\u003e\n\n\u003cp\u003eBarrel thread M64x4 and G2\u003c\/p\u003e\n\n\u003cp\u003ePower consumption 250 W and 1.2 A\u003c\/p\u003e\n\n\u003cp\u003eIP 44\u003c\/p\u003e\n\n\u003cp\u003eWeight 3.7 kg\u003c\/p\u003e","brand":"Patzelt GmbH","offers":[{"title":"Default Title","offer_id":51812919542097,"sku":"FPM-230-32l\/min-Fass","price":434.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Fasspumpe-230-Volt-Automatik-Pistole_9934b5d4-e5df-4aab-8ca7-11d5b17a0ffa.jpg?v=1757351902"},{"product_id":"svgva-8-8","title":"Hose connector 8-8 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003e Hose connector 8-8 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting two hoses with an inner diameter of 8 mm.\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 7.46 - 8 mm (corrugation inside - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 5.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 50 mm\u003c\/p\u003e\n\n\n \u003cp\u003eMaterial: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 8 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919607633,"sku":"SVGVA-8-8","price":4.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-Edelstahl-gerade-8mm_625ae0a3-c552-4f14-8e9e-f3d27d9b7c18.jpg?v=1757351904"},{"product_id":"fpm-24-30l-min-fass","title":"Drum Pump 24 Volt max. 30 l\/min, Diesel, Heating Oil, Water, Coolant, Manual Nozzle","description":"\u003cp\u003eDrum pump 24 Volt max. 30 l\/min, diesel, heating oil, water, coolant, manual nozzle\u003c\/p\u003e\n\n\u003cp\u003eThe electric diesel pump is used for easy refueling of commercial vehicles.\u003c\/p\u003e\n\n\u003cp\u003eThese drum pumps pump diesel and heating oil from drums, tanks and containers. The centrifugal pump is also suitable for filling undiluted coolant.\u003c\/p\u003e\n\n\u003cp\u003eInstallation of our digital meter for low-viscosity liquids in the pressure line is optionally possible.\u003c\/p\u003e\n\n\u003cp\u003eThe set includes everything you need for immediate operation of the drum pump:\u003c\/p\u003e\n\u003cp\u003e2 m dispensing hose\u003c\/p\u003e\n\n\u003cp\u003e2 m suction hose\u003c\/p\u003e\n\n\u003cp\u003eSuction bottom filter\u003c\/p\u003e\n\n\u003cp\u003eManual nozzle\u003c\/p\u003e\n\n\u003cp\u003eConnection cable with 3 m battery terminal clamps\u003c\/p\u003e\n\n\u003cp\u003eHose clamps\u003c\/p\u003e\n\n\u003cp\u003eMedium temperature min. 10 ºC max. 35 ºC\u003c\/p\u003e\n\n\u003cp\u003eDry running of the pump must be avoided at all costs.\u003c\/p\u003e\n\n\u003cp\u003eNoise level 70 dba\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height 2 m\u003c\/p\u003e\n\n\u003cp\u003eMax. dispensing hose length 6 m\u003c\/p\u003e\n\n\u003cp\u003eDrum thread M64x4 and G2\u003c\/p\u003e\n\n\u003cp\u003ePower consumption 110 W + 9.2 A\u003c\/p\u003e\n\n\u003cp\u003eWeight 5.5 kg\u003c\/p\u003e","brand":"Patzelt GmbH","offers":[{"title":"Default Title","offer_id":51812919673169,"sku":"FPM-24-30l\/min-Fass","price":330.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Fasspumpe-fuer-Wasser-Heizoel-Diesel_a991214c-f426-48f9-bf63-f09faa60b8ec.jpg?v=1757351907"},{"product_id":"fpm-230-38l-min-fass","title":"Barrel pump 230 Volt max. 38 l\/min, diesel, heating oil, coolant, manual nozzle","description":"\u003cp\u003eDrum pump 230 volt max. 38 l\/min, diesel, heating oil, coolant, manual nozzle\u003c\/p\u003e\n\n\u003cp\u003eThe electric diesel pump is used for easy refueling of commercial vehicles.\u003c\/p\u003e \n\n\u003cp\u003eThese drum pumps deliver diesel and heating oil from drums, tanks and containers. The centrifugal pump is also suitable for filling undiluted radiator antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eInstallation of our digital meter for low-viscosity liquids in the pressure line is optionally possible.\u003c\/p\u003e \n\n\n\u003cp\u003eThe set includes everything you need for immediate operation of the drum pump:\u003c\/p\u003e\n\n\u003cp\u003eDelivery hose 2 m\u003c\/p\u003e\n\n\u003cp\u003eSuction hose 1.60 m\u003c\/p\u003e\n\n\u003cp\u003eSuction bottom filter\u003c\/p\u003e\n\n\u003cp\u003eManual nozzle\u003c\/p\u003e\n\n\u003cp\u003eConnection cable with Schuko plug 2 m\u003c\/p\u003e\n\n\u003cp\u003eHose clamps and anti-kink spring\u003c\/p\u003e\n\n\n\u003cp\u003eMedia temperature min. 10 ºC max. 35 ºC\u003c\/p\u003e\n\n\u003cp\u003eDry running of the pump must be avoided.\u003c\/p\u003e\n\n\u003cp\u003eNoise level 70 dba\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height 2 m\u003c\/p\u003e\n\n\u003cp\u003eMax. delivery hose length 6 m\u003c\/p\u003e\n\n\u003cp\u003eBarrel thread M64x4 and G2\u003c\/p\u003e\n\n\u003cp\u003ePower consumption 250 W and 1.2 A\u003c\/p\u003e\n\n\u003cp\u003eIP 44\u003c\/p\u003e\n\n\u003cp\u003eWeight 3.6 kg\u003c\/p\u003e","brand":"Patzelt GmbH","offers":[{"title":"Default Title","offer_id":51812919771473,"sku":"FPM-230-38l\/min-Fass","price":284.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Fasspumpe-230-Volt-Diesel_8390fa8b-446b-4542-849e-e226e724c3f5.jpg?v=1757351910"},{"product_id":"st-32-sk-1-1-4-v4a","title":"Hose nozzle 32 mm, 1 1\/4 inch thread, conical, stainless steel V4A","description":"\u003cp\u003e Hose nozzle 32 mm, 1 1\/4 inch thread, conical, stainless steel V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Hose nozzle, R 11\/4\" inch thread, conical, for 32 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e The thread is a BSPT tapered Whitworth pipe thread DIN 2999\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Material V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread DIN 2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure: 10 bar\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919869777,"sku":"ST-32-SK-1 1\/4-V4A","price":15.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-konisch-1Zoll-Edelstahl_9e9afa1a-6ba4-4fdf-a2ae-d378d36b1eb8.jpg?v=1757351913"},{"product_id":"svuva-6","title":"Hose connector 180 degree bend 6 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003eHose connector 180 degree bend 6 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting 2 hoses with 6 mm inner diameter.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Outer diameter of 6.33 - 6.92 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 5.06 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Overall length 42 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Width U bend 32.17 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 11 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919935313,"sku":"SVUVA-6","price":5.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-180-Grad-Umkehrbogen.jpg?v=1757351915"},{"product_id":"hs-14x1-5","title":"Hollow screw M 14x1.5, metal","description":"\u003cp\u003eBanjo bolt M 14x1.5 metric, metal, gasoline, oil, diesel, water, air\u003c\/p\u003e\n\n\u003cp\u003esuitable for metric ring eyelets with 14 mm inner diameter\u003c\/p\u003e\n\n\u003cp\u003eThe matching aluminum sealing rings, as shown, are also available in the shop.\u003c\/p\u003e\n\n\u003cp\u003eTwo pieces are always required for mounting a banjo bolt.\u003c\/p\u003e\n\n\u003cp\u003eMaterial steel chromated, chrome 6 free\u003c\/p\u003e\n\n\u003cp\u003eRoHS compliant\u003c\/p\u003e\n\n\u003cp\u003eWrench size 19 mm\u003c\/p\u003e\n\n\u003cp\u003eTotal length 32 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 29 g\u003c\/p\u003e","brand":"Cohline GmbH Frau Eckhardt s.eckhardt@cohline.de","offers":[{"title":"Default Title","offer_id":51812922917201,"sku":"HS-14x1,5","price":3.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Hohlschraube-Stahl-metrisch-14mm_4659cced-4004-4af1-9104-b85e02025598.jpg?v=1757351918"},{"product_id":"mva-2","title":"2 inch stainless steel sleeve","description":"\u003cp\u003e 2 inch stainless steel sleeve\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923015505,"sku":"MVA-2","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_0287e6e1-88c9-4a6f-8ee6-405cae503a98.jpg?v=1757351920"},{"product_id":"dk-1-ag","title":"Swivel Coupling, Swivel Joint, 1 Inch Male\/Male","description":"\u003cp\u003eSwivel coupling, swivel joint, 1 inch male\/male\u003c\/p\u003e\n\n\u003cp\u003eThis swivel coupling significantly eases the handling of the nozzle and fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying tangling of the hose is eliminated. This extends the lifespan of the fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the nozzle and then connected to the fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, we recommend installing this swivel fitting at the pump outlet as well.\u003c\/p\u003e \n\n\u003cp\u003eFor installation and sealing, we recommend using our thread sealant. The sealant is medium strength and re-detachable.\u003c\/p\u003e \n\n\n\u003cp\u003eExternal thread: 1 inch BSPT external thread (Tapered Whitworth pipe thread DIN 2999)\u003c\/p\u003e \n\n\u003cp\u003eExternal thread: 1 inch\u003c\/p\u003e\n\n\n\u003cp\u003eMaterial swivel joint: Aluminum body and brass bushing, Viton seal\u003c\/p\u003e\n\n\u003cp\u003eMaterial double nipple: Brass\u003c\/p\u003e\n\n\u003cp\u003eTotal length: 72 mm\u003c\/p\u003e\n\n\u003cp\u003eWrench size: 38 mm\u003c\/p\u003e\n\n\u003cp\u003eThrough bore: 16 mm\u003c\/p\u003e\n\n\u003cp\u003eNormal working pressure is 1.8 to 2 bar, max. pressure is 4 to 5 bar\u003c\/p\u003e\n\n\u003cp\u003eAt high pressures, the rotatability is significantly reduced, leading to high stress and wear. We therefore advise against using pressures greater than 2 bar.\u003c\/p\u003e\n\n\u003cp\u003eWeight: 224 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923081041,"sku":"DK-1-AG","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Drehkupplung-AG-AG-1Zoll_7d668e02-63ca-4558-88cd-f7cb34fa4013.jpg?v=1757351924"},{"product_id":"gummi-8-id","title":"Gasoline hose, fuel hose, 8 mm, rubber","description":"\u003cp\u003eFuel hose, gasoline hose, diesel, 8 mm inner diameter, 13.5 mm outer diameter, rubber\u003c\/p\u003e\n\n\u003cp\u003eThis fuel hose is highly elastic and can be laid in tight radii, as the example photo with the knot shows.\u003c\/p\u003e\n\n\u003cp\u003eWe don't know a better fuel hose; the product is made in Germany.\u003c\/p\u003e\n\n\u003cp\u003eThe fuel hose is suitable for commercially available fuels, especially for premium fuel with a maximum benzene content of 50%, and for E10.\u003c\/p\u003e\n\n\u003cp\u003eFor these media, the following temperature resistance applies: -30° C\/+50° C as media temperature.\u003c\/p\u003e\n\n\u003cp\u003eWhen operating with water, air, and heating oil EL, the temperature resistance is specified as -30° C\/+90° C as media temperature.\u003c\/p\u003e\n\n\u003cp\u003eIf diesel fuel with RME additive is used, a temperature resistance of -30° C\/+70° C applies as media temperature.\u003c\/p\u003e\n\n\u003cp\u003eThe fuel hose complies with DIN 73379-2A.\u003c\/p\u003e\n\n\u003cp\u003eInner diameter 7.5 mm\u003c\/p\u003e\n\n\u003cp\u003eOuter diameter 13.5 mm\u003c\/p\u003e\n\n\u003cp\u003eInner layer NBR, reinforcement polyester, outer material CR\u003c\/p\u003e\n\n\u003cp\u003eMax. working pressure 6 bar, test pressure 20 bar, burst pressure 30 bar\u003c\/p\u003e\n\n\u003cp\u003eLargest continuous length in one piece 20 m\u003c\/p\u003e\n\n\u003cp\u003eSmallest bending radius is 55 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 150 g\/m\u003c\/p\u003e\n\n\u003cp\u003eThe price is per meter of hose. Minimum order quantity 1 meter.\u003c\/p\u003e","brand":"Cohline GmbH Frau Eckhardt s.eckhardt@cohline.de","offers":[{"title":"Default Title","offer_id":51812923146577,"sku":"Gummi-8-ID","price":5.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kraftstoffschlauch1_48e2ac72-b8a6-4707-b7ad-de4a5565bdd4.jpg?v=1757351927"},{"product_id":"bp-alu-kunststoff-3-4-adapter","title":"Drill Pump Aluminum, dry self-priming, max 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the option of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and pump without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely light universal impeller pump can be used wherever a dry self-priming pump is required for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing to a cordless screwdriver or drill with a depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is done without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 U\/min\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller should preferably be operated in only one direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drill depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch double external thread\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923179345,"sku":"BP-Alu-Kunststoff-3\/4-Adapter","price":129.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinen-Vorsatzpumpe-1_7a1132bf-9fde-405b-80d8-5dc4aadb1b46.jpg?v=1757351934"},{"product_id":"zp-400-kit-50","title":"Gear pump 400 Volt Professional, max 50 l\/min, Dispensing pump","description":"\u003cp\u003eGear pump 400 Volt Professional, max 50 l\/min, dispensing pump\u003c\/p\u003e\n\n\u003cp\u003eThis gear pump is suitable, for example, for transferring vegetable oil and hydraulic oil into various tanks, or for refueling itself.\u003c\/p\u003e \n\n\u003cp\u003eThe pressures and flow rates achieved allow the use of an automatically shutting off dispensing nozzle.\u003c\/p\u003e \n\n\u003cp\u003eThis product is a professional dispensing pump. The design of the pump and motor ensures a high flow rate even in cold winter conditions. A strainer is installed on the suction side to protect the pump.\u003c\/p\u003e \n\n\u003cp\u003eWe would also be happy to offer you suitable suction and pressure hoses according to your desired length. Furthermore, flow meters and automatically shutting off dispensing nozzles are available according to your wishes.\u003c\/p\u003e \n\n \n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 50 l\/min (at 20 degrees Celsius with medium SAE 20)\u003c\/p\u003e \n\n\u003cp\u003eBuilt-in bypass valve\u003c\/p\u003e\n\n\u003cp\u003eSet to 4.5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming\u003c\/p\u003e \n\n\u003cp\u003eApproved media: vegetable oil and diesel\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.5 kw\u003c\/p\u003e\n\n\u003cp\u003eVersion: AC 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eConnection size inlet and outlet 1 inch\u003c\/p\u003e","brand":"Scherzinger GmbH \u0026 Co. KG Ronald Pfrengle ronald.pfrengle@scherzinger.de","offers":[{"title":"Default Title","offer_id":51812923244881,"sku":"ZP-400-kit-50","price":1471.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Tankstellenpumpe_573e6019-2bf2-446b-bcbe-73345af3c8fe.jpg?v=1757351938"},{"product_id":"kht-1-1-4","title":"Ball valve, 1 1\/4 inch female thread, full bore, temperature stable, lever handle","description":"\u003cp\u003e Ball valve, 1 1\/4 inch female thread, full bore, temperature stable, lever handle\u003c\/p\u003e\n\n\n \u003cp\u003enickel-plated brass\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 79.36 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Ball brass hard chrome-plated\u003c\/p\u003e\n\n\n\u003cp\u003e Seal Teflon\/NBR\u003c\/p\u003e\n\n\n\u003cp\u003e max. 16 bar operating pressure\u003c\/p\u003e\n\n\n\u003cp\u003e Lever length 116 mm from center of attachment\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 46\u003c\/p\u003e\n\n\n\u003cp\u003e Temperature range -10 to +80°C (depending on operating pressure)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 524 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923277649,"sku":"KHT-1 1\/4","price":20.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kugelhahn-Zoll-Innengewinde.jpg?v=1757351941"},{"product_id":"ds-19-k-4","title":"Dispensing hose, diesel hose, fuel hose, 3\/4 inch, 4 m, diesel, heating oil, 1 inch male thread","description":"\u003cp\u003eDispensing hose, diesel hose, tank hose, 3\/4 inch, 4 m, diesel, heating oil, 1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003e4 meters of 3\/4 inch hose, pre-assembled with crimped 1 inch connectors, 1 inch external thread on both sides\u003c\/p\u003e \n\n\u003cp\u003eThis pressure hose is suitable for conveying heating oil, gasoline, diesel, oils and greases with a max. aromatic content of 50%.\u003c\/p\u003e \n\n\u003cp\u003eWhen used with gasoline, the medium must not remain in the hose, but only be passed through. If you need a hose in which the gasoline remains even after refueling, please ask us for a tanker hose for gasoline.\u003c\/p\u003e \n\n\n\u003cp\u003eWith the help of the optional swivel coupling shown, the handling of the nozzle and tank hose is considerably simplified.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying untangling of the hose is eliminated. This extends the service life of the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the nozzle and then connected to the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, it is also recommended to mount this swivel fitting at the pump outlet.\u003c\/p\u003e \n\n\u003cp\u003eFor insertion and sealing, we recommend using our thread sealant. The sealant is medium-strength and re-detachable.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel coupling product can be found under the hose accessories button.\u003c\/p\u003e \n\n\n\u003cp\u003eTechnical details:\u003c\/p\u003e \n\n\u003cp\u003e4 meters hose length 3\/4 inch\u003c\/p\u003e \n\n\u003cp\u003e1 inch external thread crimped on both sides\u003c\/p\u003e \n\n\u003cp\u003e3\/4 inch ID 19 mm\u003c\/p\u003e \n\n\u003cp\u003e27 mm OD\u003c\/p\u003e \n\n\u003cp\u003emax 10 bar operating pressure\u003c\/p\u003e \n\n\u003cp\u003eBursting pressure 30 bar\u003c\/p\u003e \n\n\u003cp\u003eTemperature range from -25° C\/+80° C for oil up to +100° C\u003c\/p\u003e \n\n\u003cp\u003eTube NBR black smooth\u003c\/p\u003e \n\n\u003cp\u003eCover NBR\/EPDM, black smooth, antistatic R\u0026lt;1MOhm\/m, abrasion resistant, oil, fuel and weather resistant\u003c\/p\u003e \n\n\u003cp\u003eReinforcement spiralized synthetic textile threads\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923375953,"sku":"DS-19-K-4","price":75.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Tankschlauch_e79a5bcf-2921-4106-a2ce-aa081bfd2018.jpg?v=1757351945"},{"product_id":"zp-400-9-25","title":"Lubrication oil pump, gear pump 400 Volt, 9 l\/min, 25 bar, bypass, oil up to 2000 cSt","description":"Lubrication pump, gear pump 400 Volt, 9 l\/min, 25 bar, bypass, oil up to 2000 cSt\n\nElectric gear pump in 400 Volt version.\n\nThe pump has a built-in bypass valve, allowing it to operate even with a closed outlet.\n\nThis gear pump is suitable, for example, for transferring vegetable oil into various tanks. Another application is for filtering used oil or transferring lubricating oils.\n\nTo attach the filter holder to the pump, the depicted \u003ca href=\"http:\/\/www.facet-pumpen.de\/products\/Adapter-1-1-Zoll-mit-Aussengewinde\/8\/276\/\"\u003eadapter\u003c\/a\u003e from 1 to 1 inch is required.\n\nTo prevent the pump from running dry and to ensure fast filling, it is recommended to install a \u003ca href=\"http:\/\/www.facet-pumpen.de\/products\/Saugkorb-mit-R%C3%BCckschlagventil\/54\/126\/\"\u003echeck valve\u003c\/a\u003e with a suction basket.\n\nWe would also be happy to put together a complete set with suction and pressure hoses according to your specifications.\n\nTechnical data:\n\nFlow rate max 9 l\/min (at 20 degrees Celsius with medium SAE 20)\n\nmax 25 bar\n\nup to 2000 cSt\n\nmax. 70 degrees Celsius\n\nSelf-priming max. 4 m height\n\nThreaded nozzles 1 inch internal thread\n\nApproved media vegetable oil and other oils\n\nMotor 750 Watt\n\nVersion 400 Volt nominal voltage\n\nProtection class IP 55\n\n70 db\n\nDimensions:\n\n350 x 200 x 280 mm\n\nWeight 12.5 kg","brand":"Patzelt GmbH","offers":[{"title":"Default Title","offer_id":51812923441489,"sku":"ZP-400-9-25","price":444.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zahnradpumpe-230-Volt-12-lmin-10-bar_4f267b54-a196-4913-8518-48301f28c1eb.jpg?v=1757351950"},{"product_id":"benzin-kerosin-tank-24-75","title":"Petrol transfer pump kerosene, 24 Volt, ATEX, Ex protected, barrel pump, 75 l\/min","description":"\u003cp\u003ePetrol transfer pump kerosene, 24 Volt, ATEX, Ex protected, barrel pump, 75 l\/min, self-priming\u003c\/p\u003e\n\n\n\u003cp\u003e Ex protected, Atex approval!\u003c\/p\u003e\n\n\n\u003cp\u003e This set allows refueling with gasoline, kerosene and diesel from 200 l drums.\u003c\/p\u003e\n\n\n\u003cp\u003e Pressure hose, manual nozzle and counter are available optionally.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max 75 l\/min\u003c\/p\u003e\n\n\n\u003cp\u003e max 1.1 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Self-priming\u003c\/p\u003e\n\n\n\u003cp\u003e Approved media: gasoline, kerosene and diesel\u003c\/p\u003e\n\n\n\u003cp\u003e Operating temperature -26 °C to max. 66 °C\u003c\/p\u003e\n\n\n\u003cp\u003e Version DC 24 Volt nominal voltage\u003c\/p\u003e\n\n\n\u003cp\u003e 13 amps current consumption\u003c\/p\u003e\n\n\n\u003cp\u003e 2\" barrel thread\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 15 kg\u003c\/p\u003e","brand":"STU Tanktechnik OHG hartmann@stu-tanktechnik.de","offers":[{"title":"Default Title","offer_id":51812946379089,"sku":"Benzin-Kerosin-Tank-24-75","price":792.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Atex-EX-Schutz-Benzinpumpe_343d8ad8-fbe5-47c2-ba20-74e9cd2ee132.jpg?v=1757352513"},{"product_id":"zp-40-adblue-ig-1","title":"AdBlue nozzle, up to 40 l\/min, automatic shut-off, swivel, 1 inch IG","description":"\u003cp\u003eAdBlue dispensing nozzle, up to 40 l\/min, automatic shut-off, swivel joint, 1 inch female thread\u003c\/p\u003e\n\n\u003cp\u003eThis special dispensing nozzle is designed for dispensing AdBlue.\u003c\/p\u003e\n\n\u003cp\u003eThe dispensing nozzle is made of stainless steel and has Viton O-rings.\u003c\/p\u003e\n\n\u003cp\u003eThe ergonomics of this dispensing nozzle are excellent.\u003c\/p\u003e\n\n\n\u003cp\u003emax. 40 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 3.4 bar\u003c\/p\u003e\n\n\u003cp\u003eMedium AdBlue\u003c\/p\u003e\n\n\u003cp\u003elockable in two stages\u003c\/p\u003e\n\n\u003cp\u003eSpout diameter 16 mm\u003c\/p\u003e\n\n\u003cp\u003eStainless steel swivel coupling with 1 inch female thread\u003c\/p\u003e\n\n\u003cp\u003eautomatic shut-off\u003c\/p\u003e\n\n\u003cp\u003eWeight 2.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946411857,"sku":"ZP-40-AdBlue-IG-1","price":316.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zapfpistole-Edelstahl-Wasser_23898840-6326-44e3-a1cb-8869b25d3618.jpg?v=1757352518"},{"product_id":"st-4-3-8-va","title":"Hose nozzle 4 mm, 3\/8 inch thread, cylindrical, stainless steel","description":"\u003cp\u003e Hose nozzle 4 mm, 3\/8 inch thread, cylindrical, stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e 1 piece hose nozzle, 3\/8 inch thread, straight, for 4 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Material: stainless steel 1.4571\u003cbr\u003e\n PN 40 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 19\u003c\/p\u003e\n\n\n\u003cp\u003e Weight: 22.3 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946477393,"sku":"ST-4-3\/8-VA","price":21.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-Zoll-Edelstahl_b4cfd68c-23bf-4d86-b568-1255a034240a.jpg?v=1757352520"},{"product_id":"bp-alu-perbunan-1-fuss","title":"Drill pump, aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eThus, it can both suck and push without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of a power outage.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel drill support shown is also optional. You can find the product under \"Pumps - Accessories.\"\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed by the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reverse rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame Stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946542929,"sku":"BP-Alu-Perbunan-1-Fuss","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Bohrmaschinenantrieb-Fussgestell_22a93b5d-9195-402b-8378-3c235e17b7cb.jpg?v=1757352529"},{"product_id":"svtkr-8-12-8","title":"Hose connector T piece reduced 8 - 12 - 8 mm, plastic, POM, water, diesel, air, petrol","description":"\u003cp\u003e Hose connector T piece reduced AD 8 - 12 - 8 Made of plastic for connecting hoses with ID 8 - 12 - 8 mm.\u003c\/p\u003e\n\n\n\u003cp\u003e Temperature range -0°C to + 80°C\u003c\/p\u003e\n\n\n\n\u003cp\u003e Please only use these hose connectors for the specified temperature range.\u003c\/p\u003e\n\n\n\u003cp\u003e If you require a wider temperature range, use our metal hose connectors.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Total length across the horizontal side 56.9 mm, vertical side 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle large diameter 28 mm, small diameter 22 mm\u003c\/p\u003e\n\n\n \u003cp\u003eOuter diameter 8 mm from 8 - 9 - 9.9 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 12 mm from 12 - 12.7 - 13.8 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Inner diameter large diameter 9.7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter small diameter 6.6 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 10 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946575697,"sku":"SVTKR-8-12-8","price":4.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-reduzierend_25563757-c931-4a3d-bfe4-097c8b05de7d.jpg?v=1757352531"},{"product_id":"fp-400-perbunan-200l-min","title":"Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n\u003cp\u003e This is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e \nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.25 kW, rated current (AC) 4 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​470 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 200 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 514 x 275 x 225 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 38 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946608465,"sku":"FP-400-Perbunan-200l\/min","price":2230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-400-Volt-3.jpg?v=1757352533"},{"product_id":"rs-500","title":"Pure soda","description":"\u003cp\u003e Pure soda from Heitmann.\u003c\/p\u003e\n\n\n\u003cp\u003e This product is particularly suitable for removing dried vegetable oil from the vehicle.\u003c\/p\u003e\n\n\n \u003cp\u003eThe paint around the fuel filler neck is a particularly good area for application.\u003c\/p\u003e\n\n\n\u003cp\u003e Of course, plastic canisters and all other parts covered with dried vegetable oil can also be cleaned effortlessly.\u003c\/p\u003e\n\n\n\u003cp\u003e Further indications and dosage instructions can be found on the packaging.\u003c\/p\u003e\n\n\n\u003cp\u003e The soda is very economical.\u003c\/p\u003e\n\n\n\u003cp\u003e 2-3 tablespoons dissolved in 5 liters of lukewarm water really work wonders.\u003c\/p\u003e\n\n\n\u003cp\u003e It is recommended to wear rubber gloves when handling the soda.\u003c\/p\u003e\n\n\n\u003cp\u003e The soda removes the fats from the skin.\u003c\/p\u003e\n\n\n\u003cp\u003e Do not use on aluminum surfaces.\u003c\/p\u003e\n\n\n\n\u003cp\u003e 500g bag\u003c\/p\u003e","brand":"DM Markt","offers":[{"title":"Default Title","offer_id":51812946674001,"sku":"RS-500","price":1.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Soda.jpg?v=1757352535"},{"product_id":"fp-12-perbunan-60l-min","title":"Impeller Pump 12 Volt, 60 l\/min, 5 bar, Perbunan Impeller, Continuous Operation, Water","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 4 bar, Viton Impeller, Continuous Duty, Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping oils in continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 90 ° C\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 inch male thread\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eDC version 12 Volt nominal voltage, suitable for continuous duty\u003c\/p\u003e\n\n\u003cp\u003eSpeed 1500 rpm, 50 A\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946706769,"sku":"FP-12-Perbunan-60l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-12Volt-Fernbedienung-1_f8046b4a-7e7c-4266-b27a-7647b17236ff.jpg?v=1757352541"},{"product_id":"pa-6-id","title":"Petrol hose, fuel hose, 6 mm, polyamide (PA), diesel","description":"\u003cp\u003e Petrol hose, fuel hose, diesel, 6\/8 mm ID\/AD, polyamide (PA)\u003c\/p\u003e\n\n\n\u003cp\u003e The fuel hose is almost transparent and therefore offers a good inspection option.\u003c\/p\u003e\n\n\n\u003cp\u003e Air ingress, contamination or empty lines can be reliably located at a glance.\u003c\/p\u003e\n\n\n\u003cp\u003e The picture above shows the usual PA hose and for comparison the one offered here.\u003c\/p\u003e\n\n\n\u003cp\u003e The hose is characterized by good temperature resistance of -40° C\/+90° C and chemical resistance to all types of fuels, including vegetable oil and RME.\u003c\/p\u003e\n\n\n\u003cp\u003e The hose is pulled onto the appropriate hose nipple while still warm. No hose clamps are used.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Complies with DIN 73378\u003c\/p\u003e\n\n\n\u003cp\u003e Material polyamide (PA)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 6 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 8 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight: 22.7 g\/m\u003c\/p\u003e\n\n\n\u003cp\u003e smallest bending radius 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Operating pressure at room temperature max. 12 bar, burst pressure = x 0.33\u003c\/p\u003e\n\n\n \u003cp\u003ePlease note the pressure utilization factor; at higher temperatures the operating pressure decreases.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Maximum length in one piece: 50 m\u003c\/p\u003e\n\n\n\n\u003cp\u003e The price is per meter of hose.\u003c\/p\u003e\n\n\n\u003cp\u003e Minimum order quantity 1 meter\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946739537,"sku":"PA-6-ID","price":3.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/PASchlauch_e0277615-7e62-4b13-8a5b-5dac23f04e1c.jpg?v=1757352543"},{"product_id":"fp-230-perbunan-60l-min","title":"Impeller pump 230 Volt, 60 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 230 Volt, 60 l\/min, 5 bar, Perbunan Impeller, water, heat transfer fluids, vegetable oils\u003cbr\u003e\nThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812946805073,"sku":"FP-230-Perbunan-60l\/min","price":424.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_33a211a6-a680-42dc-b9de-1528905d70f5.jpg?v=1757352550"},{"product_id":"sk-230-7-va-wein","title":"Sheet filter wine pump, stainless steel, filter capacity 1.6 - 2.5 l\/min, 10 plates 20 x 10 cm","description":"\u003cp\u003eLayer Filter Wine Pump, Stainless Steel, Filter Capacity 1.6 - 2.5 l\/min, 10 Plates 20 x 10 cm\u003c\/p\u003e\n\n\u003cp\u003eSpecial features of this pump are its low pressure and low speed.\u003c\/p\u003e\n\n\u003cp\u003eThis allows for gentle filtration - pumping of high-quality food products.\u003c\/p\u003e\n\n\u003cp\u003eThe filter's capacity consists of 10 plastic support plates for 10 filter layers. At least 2 filter layers with 3 plates are required for operation.\u003c\/p\u003e\n\n\u003cp\u003eThe necessary original filter papers can be purchased from us under the category Filters - Layer Filter\/Wine Pump in various filter finenesses.\u003c\/p\u003e\n\n\u003cp\u003eThe wine filter system is assembled and ready for operation. You only need to install your suction hose and pressure hose.\u003c\/p\u003e\n\n\u003cp\u003eThe suitable food-grade silicone hose with 10 mm inner diameter and 3 mm wall thickness can be found under the button Hoses\/Food Products.\u003c\/p\u003e\n\n\u003cp\u003eThe strong wall thickness of 3 mm prevents the silicone hose from kinking on the 10 mm hose nozzle.\u003c\/p\u003e\n\n\u003cp\u003eThe hose holds onto the conical hose nozzles without clamps.\u003c\/p\u003e\n\n\u003cp\u003eHowever, to prevent a possible loosening during the filtering process, it is advisable to use our 14 mm hose clamps.\u003c\/p\u003e\n\n\u003cp\u003eOf course, the pump can also be used alone, without the filter, for transferring liquids. For example, for transferring wine into different tanks.\u003c\/p\u003e\n\n\n\u003cp\u003eDue to its design, the pump is dry-running safe.\u003c\/p\u003e\n\n\u003cp\u003eThe side channel pump must be filled once with the medium to be pumped; then it is continuously self-priming, as liquid always remains in the pump.\u003c\/p\u003e\n\n\n\u003cp\u003eThe pump type offers further constructive advantages:\u003c\/p\u003e\n\n\u003cp\u003esuction of air is possible without damage to the impellers\u003cbr\u003e\nescape of medium is excluded\u003cbr\u003e\nthere is no contact between medium and motor\u003cbr\u003e\nlow speed with high liter output\u003c\/p\u003e\n\n\u003cp\u003eFurther applications include operation in the filtration of wine, beer, spirits, or fruit juices.\u003c\/p\u003e\n\n\n\u003cp\u003eApproved media:\u003c\/p\u003e\n\n\u003cp\u003eWine, beer, spirits, vegetable oil, fruit juice, water\u003c\/p\u003e\n\n\u003cp\u003eThe media to be pumped must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eIn this case, the pump must be equipped with a suitable pre-filter.\u003c\/p\u003e\n\n\u003cp\u003eThe viscosity must not be higher than max. 30 mm²\/s.\u003c\/p\u003e\n\n\u003cp\u003eThe medium temperature must be below 36 °C.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 Volt rated voltage\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 7 l\/min at free discharge without layer filter\u003c\/p\u003e\n\n\u003cp\u003eFlow rate with layer filter approx. 1.6 - 2.5 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax 1 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming 6 m height\u003c\/p\u003e\n\n\u003cp\u003ePump housing, shaft and impeller made of stainless steel\u003c\/p\u003e\n\n\u003cp\u003eSeals NBR\u003c\/p\u003e\n\n\u003cp\u003erigid hose nozzles cast with the housing, conical min 10 mm\u003c\/p\u003e\n\n\u003cp\u003e2850 rpm\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.3 kW and 1.1 A\u003c\/p\u003e\n\n\u003cp\u003e69 dB\u003c\/p\u003e\n\n\u003cp\u003e4 kg pump, with filter 12 kg\u003c\/p\u003e\n\n\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\n\u003cp\u003e210 x 120 x 190 mm pump\u003c\/p\u003e\n\n\u003cp\u003e400 x 270 x 250 mm pump with filter frame\u003c\/p\u003e","brand":"Rover Pompe Miro Chiarello tecnico@roverpompe.com","offers":[{"title":"Default Title","offer_id":51812946837841,"sku":"SK-230-7-VA-Wein","price":266.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Weinfilter-Pumpe-Schichtenfilter-230-Volt_4b7c388a-c124-4ad6-bdf1-4f396104f325.jpg?v=1757352560"},{"product_id":"fg-wandhalter","title":"Water prefilter wall mount","description":"\u003cp\u003e Water pre-filter wall mount suitable for the filter head FG-80my-Set and FGVA-80my-Set.\u003c\/p\u003e\n\n\n\u003cp\u003e This plastic wall bracket is suitable for the above-mentioned filter heads.\u003c\/p\u003e\n\n\n\u003cp\u003e The bracket allows for quick installation of the complete filter housing to a house wall. All holes are precisely machined.\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812946936145,"sku":"FG-Wandhalter","price":8.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Wandhalter-Filterset_7c9df736-6696-44b0-a048-024a8545c264.jpg?v=1757352562"},{"product_id":"fgva-80my-set","title":"Pre-filter water, replacement cartridge, stainless steel 80 micron, 1 inch IG, set","description":"\u003cp\u003ePre-filter water, replacement cartridge, stainless steel 80 micron, 1 inch IG, set\u003c\/p\u003e\n\n\u003cp\u003eThis set filters contaminated media, for example sandy media, before the pump inlet.\u003c\/p\u003e\n\n\u003cp\u003eThis serves to protect the pumps used and thus increases the lifespan of the mechanical parts inside the pump head.\u003c\/p\u003e\n\n\u003cp\u003eThe filter set can be installed in all pumps and supply hoses, or pipes, using 1-inch adapters and possible reducers.\u003c\/p\u003e\n\n\u003cp\u003eA wall mount for this filter housing is optionally available.\u003c\/p\u003e\n\n\u003cp\u003eThe filter head is equipped with a vent screw for bleeding.\u003c\/p\u003e\n\n\u003cp\u003eComponents of the set:\u003c\/p\u003e\n\n\u003cp\u003eComplete filter housing\u003c\/p\u003e\n\n\u003cp\u003eStainless steel filter with 80 my\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFilter fineness 80 my\u003c\/p\u003e\n\n\u003cp\u003eFilter mesh made of stainless steel, replaceable and washable\u003c\/p\u003e\n\n\u003cp\u003emax. 8 bar operating pressure\u003c\/p\u003e\n\n\u003cp\u003emax. 45 °C\u003c\/p\u003e\n\n\u003cp\u003edouble-sided brass internal thread with 1 inch\u003c\/p\u003e\n\n\u003cp\u003eVent screw in the filter head\u003c\/p\u003e\n\n\u003cp\u003eHeight of the filter housing 320 mm\u003c\/p\u003e\n\n\u003cp\u003eMax. diameter 145 mm\u003c\/p\u003e\n\n\u003cp\u003eFilter cartridge length 250 mm and 70 mm diameter\u003c\/p\u003e\n\n\u003cp\u003e1 kg total weight with filter cartridge\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812946968913,"sku":"FGVA-80my-Set","price":86.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Vorfilter-mit-Wechselpatrone-Edelstahl_b0800bd0-978f-4595-9eb3-73a6085cebd6.jpg?v=1757352567"},{"product_id":"st-25-sk-1-v4a","title":"Hose nozzle 25 mm, 1 inch thread, conical, stainless steel V4A","description":"\u003cp\u003e Hose nozzle 25 mm, 1 inch thread, conical, stainless steel V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Hose nozzle, R 1\" inch thread, conical, for 25 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e The thread is a BSPT tapered Whitworth pipe thread DIN 2999\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Total length 65.15 mm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle 36.48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 24.8 - 25.78 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 35 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread DIN 2999-1\u003c\/p\u003e\n\n\n \u003cp\u003emax. pressure 10 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 112 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947001681,"sku":"ST-25-SK-1-V4A","price":10.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-konisch-1Zoll-Edelstahl_9b2cf309-e6ca-45ff-8b62-ddaac502d7e6.jpg?v=1757352570"},{"product_id":"mva-11-4","title":"Sleeve 1 1\/4 inch stainless steel","description":"\u003cp\u003e Sleeve 1 1\/4 inch stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947067217,"sku":"MVA-11\/4","price":10.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_7a1ab8cb-c79d-4d27-90d8-942d00d3c6cf.jpg?v=1757352572"},{"product_id":"svuva-8","title":"Hose connector 180 degree bend 8 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003e Hose connector 180 degree bend 8 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting 2 hoses with 8 mm inner diameter.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Outer diameter of 8.26 - 8.86 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 6.92 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Overall length 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Width U bend 40.26 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 15 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947099985,"sku":"SVUVA-8","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-180-Grad-Umkehrbogen_b964f61a-21dd-4d65-b7b5-f81d2b73249b.jpg?v=1757352574"},{"product_id":"zp-24-2-3-6-bl","title":"Gear pump 24 Volt, 1-6 bar, 2.3 l\/min, bypass, stainless steel pump head, PEEK gears","description":"\u003cp\u003eGear pump 24 Volt, 1-6 bar, 2.3 l\/min, bypass, stainless steel pump head, PEEK gears\u003c\/p\u003e\n\n\u003cp\u003eThis is a magnetically coupled self-priming gear pump with a brushless DC motor.\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for continuous operation with vegetable oil, for example as a pre-feed pump in trucks\/tractors\/CHP units.\u003c\/p\u003e\n\n\u003cp\u003eSpecial application as a pump for common rail engines.\u003c\/p\u003e\n\n\u003cp\u003eThe gear pump has a guaranteed service life of 20,000 operating hours, depending on the pressure operated.\u003c\/p\u003e\n\n\u003cp\u003eOptionally available, you will see the depicted pre-filter for use with vegetable oil.\u003c\/p\u003e\n\n\u003cp\u003eMaterials in contact with medium:\u003c\/p\u003e\n\n\u003cp\u003ePump head AISI316\u003c\/p\u003e\n\n\u003cp\u003eGears PEEK\u003c\/p\u003e\n\n\u003cp\u003eSeal PTFE\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate 2.3 l\/min\u003c\/p\u003e\n\n\u003cp\u003eMax pressure 6 bar in continuous operation\u003c\/p\u003e\n\n\u003cp\u003eContinuously adjustable operating pressure by means of built-in overflow valve 1-6 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming up to 3 m height\u003c\/p\u003e\n\n\u003cp\u003eRated speed 3,400 rpm +\/- 10%\u003c\/p\u003e\n\n\u003cp\u003eThread 1\/8 inch NPT inlet\/outlet\u003c\/p\u003e\n\n\u003cp\u003eApproved media: oil, diesel, vegetable oil, water, chemicals compatible with the materials used\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 120 ° C\u003c\/p\u003e\n\n\u003cp\u003eMax inlet pressure +\/- 0.5 bar\u003c\/p\u003e\n\n\u003cp\u003eVersion DC 24 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eRated current 1.97A +\/- 20%\u003c\/p\u003e\n\n\u003cp\u003eStarting current approx. 6.8A\u003c\/p\u003e\n\n\u003cp\u003eRated power 30W\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP40\u003c\/p\u003e\n\n\u003cp\u003eSpark suppressed\u003c\/p\u003e\n\n\u003cp\u003eCE\u003c\/p\u003e\n\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\n\u003cp\u003eTotal length 32 cm\u003c\/p\u003e\n\n\u003cp\u003eMotor diameter 42 mm\u003c\/p\u003e\n\n\u003cp\u003ePump head diameter 31.7 mm\u003c\/p\u003e\n\n\u003cp\u003eFlange diameter 60 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 973 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947132753,"sku":"ZP-24-2,3-6-Bl","price":1732.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zahnradpumpe-Gleichstrom_c56c909c-62d7-41c6-a6ce-6852bf3fea07.jpg?v=1757352586"},{"product_id":"hf-schlauch-910","title":"Drum pump for flammable liquids, immersion depth 910mm, EX Zone 0","description":"\u003cp\u003eDrum pump for flammable liquids, hose outlet, immersion depth 910mm, EX protection zone 0.\u003c\/p\u003e\n\n\u003cp\u003eFor the stainless steel hand drum pump, you will also need an R2 inch drum adapter. The adapter shown is for illustrative purposes only.\u003c\/p\u003e\n\n\u003cp\u003eNumerous adapters are available, from gas-tight metal versions to PVC. Please call us to discuss your application and we will recommend the appropriate drum adapter.\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eIn conjunction with the anti-static set, which is available as an accessory, the pump meets the requirements for filling flammable liquids.\u003c\/p\u003e \n\n\u003cp\u003eDEKRA has tested this hand pump and approved it for EX protection zones 0 and 1. Explosion group II A.\u003c\/p\u003e \n\n\u003cp\u003eThe PTFE seals inside the discharge hose ensure durable and maintenance-free use. The hose is 1.2 m long, contributing to a fast and safe workflow.\u003c\/p\u003e\n\n\u003cp\u003eOnly food-safe materials are used in the pump.\u003c\/p\u003e\n\n\n\n\u003cp\u003eNot suitable for acetone. For this application, please use our solvent pump.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical details:\u003c\/p\u003e\n\n\n\u003cp\u003eDEKRA tested EX protection zone 0 + 1 Explosion group II A\u003c\/p\u003e\n\n\u003cp\u003eImmersion tube diameter 32 mm\u003c\/p\u003e\n\n\u003cp\u003eImmersion depth 910 mm Total length 1030 mm\u003c\/p\u003e\n\n\u003cp\u003eStroke 560 ml\u003c\/p\u003e\n\n\u003cp\u003eHose outlet made of PTFE inside and VA outside 1.2 m\u003c\/p\u003e\n\n\u003cp\u003eElectrically conductive\u003c\/p\u003e\n\n\u003cp\u003eShut-off valve VA NW 8 mm\u003c\/p\u003e\n\n\u003cp\u003eSpout diameter 12.8 mm\u003c\/p\u003e","brand":"Bürkle GmbH N3 N2 N4 15% - No 0% dpd Versand","offers":[{"title":"Default Title","offer_id":51812947198289,"sku":"HF-Schlauch-910","price":694.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Fassverschraubung-2_33bba052-a764-43f2-bd5b-ccd4676c5718.jpg?v=1757352593"},{"product_id":"frostschutz-tank-12-tragbar","title":"Transfer Pump Antifreeze, 12 Volt, max. 45 l\/min","description":"\u003cp\u003eAntifreeze transfer pump, 12 Volt, max. 45 l\/min\u003c\/p\u003e\n\n\u003cp\u003eThis positive displacement pump allows the transfer of antifreeze from barrels, canisters and tanks.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is equipped with a waterproof on\/off switch and a bypass valve.\u003c\/p\u003e\n\n\u003cp\u003eThe positive displacement pump is suitable for continuous operation and is self-priming.\u003c\/p\u003e\n\n\u003cp\u003eThe included hose connectors can be positioned variably in the pump according to the operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eTwo possible configurations are shown in the photos.\u003c\/p\u003e \n\n\u003cp\u003eYou achieve the highest throughput by mounting the two hose nozzles facing upwards.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 45 l\/min\u003c\/p\u003e \n\n\u003cp\u003ethe integrated bypass should not be used for more than 3 minutes, otherwise the motor will overheat\u003c\/p\u003e\n\n\u003cp\u003emax 1.2 bar\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming over max. 1.50 m\u003c\/p\u003e\n\n\u003cp\u003eApproved media: Antifreeze\u003c\/p\u003e\n\n\u003cp\u003eHose connectors with 25 mm - 1 inch outer diameter\u003c\/p\u003e\n\n\u003cp\u003eVersion DC 12 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eStarting current 19 A, continuous current 8 A\u003c\/p\u003e\n\n\u003cp\u003e2.5 m power cable to the battery clamps with integrated 20 A fuse\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature - 10 ° C to max. + 60 ° C\u003c\/p\u003e\n\n\u003cp\u003eWeight 3.3 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947558737,"sku":"Frostschutz-Tank-12-tragbar","price":224.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Diesel-umfuellpumpe-tragbar_d4385218-109c-4c9b-9f6c-057ef822ebb1.jpg?v=1757352605"},{"product_id":"sk-80-230-va","title":"Side channel pump, 80 volts, stainless steel, 230 l\/min, self-priming, water, sea water, heating oil, diesel","description":"\u003cp\u003e Side channel pump, 80 volts, stainless steel, 230 l\/min, self-priming, water, sea water, heating oil, diesel\u003c\/p\u003e\n\n\n\u003cp\u003e Due to its operating principle, the side channel pump is protected against dry running for short periods.\u003c\/p\u003e\n\n\n\u003cp\u003e The side channel pump must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.\u003c\/p\u003e\n\n\n\u003cp\u003e If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.\u003c\/p\u003e\n\n\n\u003cp\u003e This also applies if a long horizontal distance has to be overcome.\u003c\/p\u003e\n\n\n\n \u003cp\u003eThis pump type offers further design advantages:\u003c\/p\u003e\n\n\n\u003cp\u003e the intake of air is possible without damage to the wings\u003c\/p\u003e\n\n\n\u003cp\u003e there is no contact between medium and motor\u003c\/p\u003e\n\n\n\u003cp\u003e low speed with high liter power\u003c\/p\u003e\n\n\n\n\u003cp\u003e This pump is suitable, for example, for transferring water, sea water, heating oil or diesel into various tanks.\u003c\/p\u003e\n\n\n\u003cp\u003e A particular area of ​​application is installation in commercial vehicles with electric drive.\u003c\/p\u003e\n\n\n\u003cp\u003e For example, for watering gardens in cemeteries.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Approved media:\u003c\/p\u003e\n\n\n\u003cp\u003e Water, sea water, wine, vegetable oil, diesel, heating oil\u003c\/p\u003e\n\n\n\u003cp\u003e The media to be pumped must not contain any abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003e In this case, the pump must be equipped with a suitable filter.\u003c\/p\u003e\n\n\n\u003cp\u003e The viscosity must not exceed 100 cSt.\u003c\/p\u003e\n\n\n\u003cp\u003e The media temperature must be below 70 ° C.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Version 80 Volt DC, nominal voltage\u003c\/p\u003e\n\n\n\u003cp\u003e Electrical connection terminal board, without cable and plug\u003c\/p\u003e\n\n\n\u003cp\u003e max. 230 l\/min flow rate (measured with water)\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure 3 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Self-priming max. 6 m height\u003c\/p\u003e\n\n\n \u003cp\u003ePump housing and impeller made of stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Motor shaft material: stainless steel AISI 316\u003c\/p\u003e\n\n\n\u003cp\u003e Mechanical seal CER\/GRA\/NBR\u003c\/p\u003e\n\n\n\u003cp\u003e Hose connection 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e 1400 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e There is a shipping charge of €50 for the freight forwarding company.\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947591505,"sku":"SK-80-230-VA","price":4374.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Seitenkanalpumpe-400-V-230-Liter_989e705c-7eca-4d44-a4fe-da56238edd8e.jpg?v=1757352608"},{"product_id":"mva-1-4","title":"1\/4 inch stainless steel sleeve","description":"\u003cp\u003e 1\/4 inch stainless steel sleeve\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 25mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter 18.75mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 31g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947657041,"sku":"MVA-1\/4","price":2.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_e20c2534-cbdb-4b12-8388-41168dccdf41.jpg?v=1757352609"},{"product_id":"r-16-10","title":"Ring eyelet M 16x1.5 with 10 mm hose nozzle, metal","description":"Ring eyelet for banjo bolt M 16x1.5 with 10 mm hose nozzle, metal\u003cbr\u003e\u003cbr\u003eMedia: Water, oil, diesel, heating oil, gasoline, vegetable oil\u003cbr\u003e\u003cbr\u003eWeight 35 g\u003cbr\u003e\u003cbr\u003e","brand":"Cohline GmbH Frau Eckhardt s.eckhardt@cohline.de","offers":[{"title":"Default Title","offer_id":51812947689809,"sku":"RÖ-16-10","price":5.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Ringoese-16x1_5-10mm.jpg?v=1757352611"},{"product_id":"fk-90-grad-stopfen","title":"Filter head, universal, vertical mounting, aluminum, two blanking plugs, set","description":"\u003cp\u003eFilter head, universal with vertical mounting, aluminum, complete with two blanking plugs\u003c\/p\u003e\n\n\u003cp\u003eThis filter head allows the use of inexpensive filter cartridges.\u003c\/p\u003e\n\n\u003cp\u003eLarger pipe cross-sections can also be flanged here using eyelets. You can find these and the matching banjo bolts under the \"Filters and Accessories\" button.\u003c\/p\u003e\n\n\u003cp\u003eThere are three M 14 x 1.5 internal threads on the inlet side.\u003c\/p\u003e\n\n\u003cp\u003eThe filter head has an outlet with an M 14 x 1.5 internal thread.\u003c\/p\u003e\n\n\u003cp\u003eTwo of our cartridges fit this filter head:\u003c\/p\u003e\n\n\u003cp\u003eDiesel fuel filter, water separator, 3-5 my filter fineness\u003c\/p\u003e\n\n\u003cp\u003eArticle number: KF-W\u003c\/p\u003e\n\n\u003cp\u003eand article number: KF-LKW\u003c\/p\u003e\n\n\u003cp\u003eDiesel fuel filter, water separator, 7-10 my filter fineness\u003c\/p\u003e\n\n\n\u003cp\u003eLength: 94 mm\u003c\/p\u003e\n\n\u003cp\u003eWidth: 89 mm\u003c\/p\u003e\n\n\u003cp\u003eHeight: 52 mm\u003c\/p\u003e\n\n\u003cp\u003eSlotted holes for mounting 14 x 11 mm\u003c\/p\u003e\n\n\u003cp\u003eMounting hole spacing 50 mm\u003c\/p\u003e\n\n\u003cp\u003eMounting for filter cartridges with 16 x 1.5 mm\u003c\/p\u003e\n\n\u003cp\u003eOuter diameter sealing surface 71.94 mm\u003c\/p\u003e\n\n\u003cp\u003eInner diameter sealing surface 22.34 mm\u003c\/p\u003e\n\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\n\u003cp\u003e2 blanking plugs M 14x1.5\u003c\/p\u003e\n\n\u003cp\u003e2 aluminum sealing rings M 14\u003c\/p\u003e\n\n\u003cp\u003e1 bleed screw with seal\u003c\/p\u003e\n\n\u003cp\u003eWeight 278 g\u003c\/p\u003e","brand":"Schmitter AG bei Bestellung über web shop keine Versandkosten! Jürgen Feierfeil liefert mit GLS http:\/\/webshop.schmitter-hydraulik.de\/ Benutzer: BPeters Passwort: CCNS5HUZ","offers":[{"title":"Default Title","offer_id":51812947755345,"sku":"FK-90-Grad-Stopfen","price":23.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Filterkopf-mit-Filter-90-Stopfen_3875b8b4-d05a-4997-b535-e30ba58bebe3.jpg?v=1757352616"},{"product_id":"st-4-5x0-8-m-mv","title":"Hose nozzle 4 mm M 5x0.8 thread, metric, nickel-plated brass","description":"\u003cp\u003e Hose nozzle 4 mm M 5x0.8 thread, metric, nickel-plated brass\u003c\/p\u003e\n\n\n\u003cp\u003e 4 mm hose nozzle with metric M 5x0.8 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 5x0.8\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 2.1 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947886417,"sku":"ST-4-5x0,8-M-MV","price":2.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_75b7ad19-24c1-4f60-ab30-9da7cf234a66.jpg?v=1757352619"},{"product_id":"adblue-pulser","title":"Pulser, 1 inch male thread on both sides, max. 10 bar, max. 28 V AC\/DC 100 mAmp (87.73 pulse\/l)","description":"\u003cp\u003e Pulser, 1 inch male thread on both sides, max. 10 bar, max. 28 V AC\/DC 100 mAmp (87.73 pulse\/l)\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947951953,"sku":"AdBlue-Pulser","price":116.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/AdBlue-Pulser-Edelstahl.jpg?v=1757352621"},{"product_id":"st-2-3x0-5-m-va","title":"Hose nozzle 2 mm M 3x0.5 thread, metric, stainless steel 1.4571","description":"\u003cp\u003e Hose nozzle 2 mm M 3x0.5 thread, metric, stainless steel 1.4571\u003c\/p\u003e\n\n\n\u003cp\u003e 2 mm hose nozzle with metric M 3x0.5 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 3x0.5\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 4.5 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 0.7 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947984721,"sku":"ST-2-3x0,5-M-VA","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_7905e591-ad92-4c44-be2a-e51fd2a15634.jpg?v=1757352623"},{"product_id":"st-3-3x0-5-m","title":"Hose nozzle 3 mm M 3x0.5 thread, metric, brass","description":"\u003cp\u003e Hose nozzle 3 mm M 3x0.5 thread, metric, brass\u003c\/p\u003e\n\n\n\u003cp\u003e 3 mm hose nozzle with metric M 3x0.5 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 3x0.5\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 4.5 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 0.7 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948017489,"sku":"ST-3-3x0,5-M","price":2.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_e17b6b82-851d-427b-a11b-f8d7f772f6b8.jpg?v=1757352625"}],"url":"https:\/\/www.pumpen-peters.de\/en\/collections\/all.oembed?page=51","provider":"Pumpen-Peters und Zubehör","version":"1.0","type":"link"}