{"title":"Impeller Pump","description":"","products":[{"product_id":"bp-alu-kunststoff-3-4-adapter","title":"Drill Pump Aluminum, dry self-priming, max 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the option of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and pump without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely light universal impeller pump can be used wherever a dry self-priming pump is required for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing to a cordless screwdriver or drill with a depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is done without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 U\/min\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller should preferably be operated in only one direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drill depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch double external thread\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923179345,"sku":"BP-Alu-Kunststoff-3\/4-Adapter","price":129.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinen-Vorsatzpumpe-1_7a1132bf-9fde-405b-80d8-5dc4aadb1b46.jpg?v=1757351934"},{"product_id":"bp-alu-perbunan-1-fuss","title":"Drill pump, aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eThus, it can both suck and push without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of a power outage.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel drill support shown is also optional. You can find the product under \"Pumps - Accessories.\"\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed by the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reverse rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame Stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946542929,"sku":"BP-Alu-Perbunan-1-Fuss","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Bohrmaschinenantrieb-Fussgestell_22a93b5d-9195-402b-8378-3c235e17b7cb.jpg?v=1757352529"},{"product_id":"fp-400-perbunan-200l-min","title":"Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n\u003cp\u003e This is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e \nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.25 kW, rated current (AC) 4 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​470 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 200 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 514 x 275 x 225 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 38 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946608465,"sku":"FP-400-Perbunan-200l\/min","price":2230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-400-Volt-3.jpg?v=1757352533"},{"product_id":"fp-12-perbunan-60l-min","title":"Impeller Pump 12 Volt, 60 l\/min, 5 bar, Perbunan Impeller, Continuous Operation, Water","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 4 bar, Viton Impeller, Continuous Duty, Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping oils in continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 90 ° C\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 inch male thread\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eDC version 12 Volt nominal voltage, suitable for continuous duty\u003c\/p\u003e\n\n\u003cp\u003eSpeed 1500 rpm, 50 A\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946706769,"sku":"FP-12-Perbunan-60l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-12Volt-Fernbedienung-1_f8046b4a-7e7c-4266-b27a-7647b17236ff.jpg?v=1757352541"},{"product_id":"fp-230-perbunan-60l-min","title":"Impeller pump 230 Volt, 60 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 230 Volt, 60 l\/min, 5 bar, Perbunan Impeller, water, heat transfer fluids, vegetable oils\u003cbr\u003e\nThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812946805073,"sku":"FP-230-Perbunan-60l\/min","price":424.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_33a211a6-a680-42dc-b9de-1528905d70f5.jpg?v=1757352550"},{"product_id":"fp-230-epdm-fda-115-l-min","title":"Impeller Pump 230 Volt, max. 115 l\/min, max. 3 bar, Bee Feed Syrup","description":"Impeller pump 230 Volt, max. 115 l\/min, max. 3 bar, bee feed syrup\n\nThis bee feed pump has been extensively tested by us in \u003ca href=\"http:\/\/www.pumpen-peters.de\/blog\/post\/Bienen-Futter-Sirup-Pumpe-mit-230-Volt-Antrieb-f%C3%BCr-den-Imker\/56\/\"\u003epractice\u003c\/a\u003e.\n\nWe used the highly viscous syrup from API Alsace Ickowicz from France as feed syrup.\n\nThis is the thickest syrup for bee feeding known to us.\n\nOur syrup pump therefore also pumps bee feed, such as:\nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettler's feed syrup, Ambrosia, Api Gold, Api Royal Syrup, Butiforce, Apikel, Fructoplus, Apistar.\n\nSince the feedstuffs have different viscosities at different temperatures, here are some data as an example.\n\nTest basis:\n\nThe suction hose with 50 mm inner diameter is connected directly to the feed syrup IBC via a 2-inch hose nozzle.\n\nThe pressure line has an inner diameter of 38 mm and is equipped with a ball valve with an outlet nozzle at the end.\n\nThe test results with different hose lengths at a syrup temperature of 20 ° C and a suction hose of 1 m length and 50 mm inner diameter:\n\n5 m hose length 75 l\/min\n\n10 m hose length 49 l\/min\n\n20 m hose length 29 l\/min\n\n25 m hose length 21 l\/min\n\nAll components used in the test, such as hoses, hose nozzles and ball valves, can be found in our shop.\n\nWe would be happy to put together your personal set.\n\nTechnical data:\n\nMotor 1.8 kw, 230 Volt, 11 A, direction reversal\n\nStarting current approx. 16 -18 A, with direction reversal approx. 20 A\n\nSpeed 850 rpm\n\nFlow rate max. 115 l\/min calculated on water\n\nmax 3 bar\n\nImpeller EPDM with FDA approval, dry running max. 1 minute\n\nMechanical seal Gra\/Cer\/EPDM\n\nPump casing stainless steel\n\nThread on both sides 1 1\/2 inch external thread\n\nmax. 90 °C medium temperature\n\nProtection class IP 55\n\nDimensions: 338 x 180 x 215 mm\n\nWeight 35 kg\n\nThe pump will be shipped by freight forwarder, the cost is 72 € including VAT.","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948214097,"sku":"FP-230-EPDM-FDA-115 l\/min","price":2588.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Futtersirup-Bienen-Pumpe_a4ffe023-22c2-4198-9b1e-76d5833ffc8f.jpg?v=1757352635"},{"product_id":"fp-400-perbunan-90l-min","title":"Impeller pump 400 Volt, 90 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 400 Volt, 90 l\/min, 5 bar, Perbunan Impeller, water, heat transfer fluids, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and heat transfer fluids in solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for pumping media with abrasive constituents is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nService water, heating oil, diesel, oil, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948410705,"sku":"FP-400-Perbunan-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_a00cbde1-9b88-4a5b-82ca-9aa015ca17ff.jpg?v=1757352648"},{"product_id":"fp-400-perbunan-60l-min","title":"Impeller pump 400 Volt, 60 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 400 Volt, 60 l\/min, 5 bar, Perbunan Impeller, Water, Heat Transfer Fluid, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded fittings 1 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, seawater, vegetable oils, detergents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C medium temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948574545,"sku":"FP-400-Perbunan-60l\/min","price":558.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_aba47381-08fe-499b-bf52-8b2073cbc922.jpg?v=1757352666"},{"product_id":"fp-230-kunststoff-90l-min","title":"Impeller Pump 230 Volt, 90 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil","description":"\u003cp\u003eImpeller Pump 230 Volt, 90 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth; otherwise, up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 1\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 U\/min\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948607313,"sku":"FP-230-Kunststoff-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_890052a4-1a5d-45ab-a141-d504555f1e29.jpg?v=1757352672"},{"product_id":"fp-400-viton-90l-min","title":"Impeller Pump 400 Volt, 90 l\/min, 3 bar, Viton Impeller, Oil. Diesel, Wood Preservatives","description":"\u003cp\u003eImpeller pump 400 Volt, 90 l\/min, 3 bar, Viton impeller, oil. Diesel, wood preservatives\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed, as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nOil, diesel, heating oil, palm oil, soybean oil, oil-based wood preservatives\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e \n\n\u003cp\u003eDimensions 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948738385,"sku":"FP-400-Viton-90l\/min","price":920.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe_0d5669f5-f77f-43cb-9bad-dd63d3090d44.jpg?v=1757352685"},{"product_id":"fp-400-kunststoff-90l-min","title":"Impeller Pump 400 Volt, 90 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller Pump 400 Volt, 90 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for conveying water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 1\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt rated voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948771153,"sku":"FP-400-Kunststoff-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_e1fa8663-1d75-4c32-98df-3ee3366bde28.jpg?v=1757352690"},{"product_id":"fp-400-kunststoff-60l-min","title":"Impeller Pump 400 Volt, 60 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller pump 400 Volt, 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948836689,"sku":"FP-400-Kunststoff-60l\/min","price":532.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_1bf4c5e7-6640-486c-a8b6-ab50a0e98434.jpg?v=1757352694"},{"product_id":"fp-400-perbunan-115l-min","title":"Impeller pump 400 Volt, max 115 l\/min, 3 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 115 l\/min, 3 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n \u003cp\u003eThis is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e\n Bioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.5 kW, rated current (AC) 4.1 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​900 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 115 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 3 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 1 1\/2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 338 x 215 x 159 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 20 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812951294289,"sku":"FP-400-Perbunan-115l\/min","price":1160.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Lebensmittel-400-Volt.jpg?v=1757352719"},{"product_id":"fp-400-perbunan-166l-min","title":"Impeller pump 400 Volt, max 166 l\/min, 3 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 166 l\/min, 3 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n\u003cp\u003e This is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e\n Bioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.5 kW, rated current (AC) 3.8 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​1400 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 166 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 3 bar\u003c\/p\u003e\n\n\n \u003cp\u003eImpeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 1 1\/2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 420 x 238 x 180 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 20 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812965024081,"sku":"FP-400-Perbunan-166l\/min","price":1428.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-400-Volt-2.jpg?v=1757352880"},{"product_id":"bp-alu-perbunan-1-fsm","title":"Flat Suction Mat Set Drill Pump, Dry Self-Priming","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils, flat suction mat set\u003c\/p\u003e\n\n\u003cp\u003eThis set is fully equipped for immediate use. You only need to attach your cordless drill, or drill, both with depth stop, to the pump.\u003c\/p\u003e\n\n\u003cp\u003eWith the hoses included in the set and the flat suction mat, you can pump the liquids to be extracted directly into the transport box.\u003c\/p\u003e\n\n\u003cp\u003eThis set is characterized by an almost complete pumping out of the liquid and can also be used on large areas.\u003c\/p\u003e\n\n\u003cp\u003eFor plumbers, dewatering pump sumps and lifting systems is now quick and easy.\u003c\/p\u003e\n\n\u003cp\u003eThe heating engineer completely sucks up puddles of water after maintenance work on boilers and hot water tanks in minutes.\u003c\/p\u003e\n\n\u003cp\u003eElectricians also receive an almost wipe-dry floor covering after using the pump, which, for example, occurs in the event of leaks of all kinds (washing machines, dishwashers, condensate dryers).\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum attachment pump for drills is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and also push without changing the hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is required for transferring.\u003c\/p\u003e\n\n\u003cp\u003eBy means of a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing to a cordless drill, or drill with a drilling depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly takes place without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe impeller made of Perbunan is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min (depending on the drive power of the drill or cordless drill used)\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar (depending on the drive power of the drill or cordless drill used)\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reversing direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drilling depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eScope of delivery set:\u003c\/p\u003e\n\n\u003cp\u003e1 x impeller pump with holder for the depth stop\u003c\/p\u003e\n\n\u003cp\u003e1 x flat suction mat with 1 inch external thread, 460 x 265 x 15\u003c\/p\u003e\n\n\u003cp\u003e1 x hose 3 m length 1 inch internal thread on both sides, 3\/4 inch hose inner diameter\u003c\/p\u003e\n\n\u003cp\u003e1 x hose 3 m length 1 inch internal thread on one side, 3\/4 inch hose inner diameter, other side for open outlet\u003c\/p\u003e\n\n\u003cp\u003e1 x suction basket with 1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eTransport box with lid 528x310x320mm\u003c\/p\u003e\n\n\u003cp\u003eThe cordless screwdriver shown is not included in the scope of delivery.\u003c\/p\u003e\n\n\u003cp\u003eWeight 7.6 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812965318993,"sku":"BP-Alu-Perbunan-1-FSM","price":368.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Flachsaugmatte-Wasser_87f948d2-206a-48e7-89bf-409c77aff8aa.jpg?v=1757352925"},{"product_id":"fp-230-perbunan-15l-min","title":"Impeller Pump 230 Volt, max. 15 l\/min, max. 5 bar, Perbunan Impeller, Water","description":"\u003cp\u003eImpeller Pump 230 Volt, max. 15 l\/min, max. 5 bar, Perbunan Impeller, Water\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be conveyed as long as they fit between the impeller vanes and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to a depth of 3 m, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this type of pump is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 15 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C medium temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 1400 rpm\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812970594641,"sku":"FP-230-Perbunan-15l\/min","price":369.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_25742b1c-795f-4f8e-afb2-8550aa8c01b3.jpg?v=1757353035"},{"product_id":"fp-druckluftmotor-kunststoff","title":"Impeller pump, air motor, 30 l\/min, max. 4 bar, diesel, heating oil, mineral oil","description":"\u003cp\u003eImpeller Pump Air Motor 30 l\/min, max. 4 bar, Diesel, Heating Oil, Mineral Oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping diesel, heating oil and mineral oil.\u003c\/p\u003e\n\n\u003cp\u003eEspecially in gas stations and workshops with compressed air connections, this extremely lightweight pump can be used universally.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry-running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003ePressure max 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e \n\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e \n\n\n\u003cp\u003eAir motor:\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 3000 rpm at max. 6.3 bar\u003c\/p\u003e\n\n\u003cp\u003eAir connection 1\/4 inch\u003c\/p\u003e\n\n\u003cp\u003eDrill chuck 10 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 1.7 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812970791249,"sku":"FP-Druckluftmotor-Kunststoff","price":472.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Pumpe-Druckluftmotor_e27f2337-8432-451f-abaa-2899eddc6741.jpg?v=1757353045"},{"product_id":"ip-12-24-perbunan-10-20-3-4","title":"Impeller Pump 12\/24 Volt, 10\/20 l\/min, 3\/4 inch, 4\/5 bar, Perbunan Impeller","description":"\u003cp\u003eImpeller Pump 12\/24 Volt, 10\/20 l\/min, 3\/4 inch, 4\/5 bar, Perbunan Impeller\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, oil, diesel and other media.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped, as long as they fit between the impeller blades and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eLikewise, a different material combination can be chosen for the impeller and the seals.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming down to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\u003cp\u003eThis impeller pump has a multivoltage motor and can be operated with 12 V or 24 V.\u003c\/p\u003e\n\n\u003cp\u003eThe speed and thus the flow rates change depending on the voltage.\u003c\/p\u003e\n\n\u003cp\u003eA sample photo shows the product with cable and switch.\u003c\/p\u003e \n\n\u003cp\u003eOther versions are possible.\u003c\/p\u003e\n\n\u003cp\u003ePlease ask us about this.\u003c\/p\u003e\n\n\u003cp\u003eWe will be happy to advise you individually according to your application.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data for 12 Volt voltage:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 10 l\/min (medium water)\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eRated power 0.12 kW\u003c\/p\u003e\n\n\u003cp\u003eRated current (DC) Inrush current 10 A, Operating current 8 A\u003c\/p\u003e\n\n\u003cp\u003emax. speed 980 min-1\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data for 24 Volt voltage:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 20 l\/min (medium water)\u003c\/p\u003e\n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eRated power 0.45 kW\u003c\/p\u003e\n\n\u003cp\u003eRated current (DC) Inrush current 16 A, Operating current 12 A\u003c\/p\u003e\n\n\u003cp\u003emax. speed 1700 min-1\u003c\/p\u003e\n\n\n\u003cp\u003eOperating time: 10 min. load \/ 20 min. break.\u003c\/p\u003e\n\n\n\u003cp\u003eImpeller Perbunan, Bushing Polyamide (other versions possible)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminium EN AW-6060\/AC-43400\u003c\/p\u003e\n\n\u003cp\u003eMotor shaft S-WE 14x37.5\u003c\/p\u003e\n\n\u003cp\u003eExternal thread 3\/4 inch\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 44\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812971774289,"sku":"IP-12\/24-Perbunan-10\/20-3\/4","price":934.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Gleichstrom-12-24-Volt-1_8c330620-31e8-427b-a666-70e6acebcc3a.jpg?v=1757353069"},{"product_id":"bp-alu-perbunan-3-4-adapter","title":"Drill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and pump without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transfer.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless drill and this pump, it can be used as a bilge pump on a boat in case of power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing it to a cordless drill or drill with a depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is done without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe impeller made of Perbunan is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reversing direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch double-sided external thread\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812973904209,"sku":"BP-Alu-Perbunan-3\/4-Adapter","price":129.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinen-Vorsatzpumpe_6d1a6327-0c14-4f4b-81e3-33240e32205b.jpg?v=1757353177"},{"product_id":"fp-400-perbunan-30l-min","title":"Impeller Pump 400 Volt, 30 l\/min, 5 bar, Perbunan Impeller, water, detergents, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 400 Volt, 30 l\/min, 5 bar, Perbunan Impeller, water, detergents, heat transfer fluids, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive ingredients is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to a depth of 3 m, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eSpeed 2900 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812979016017,"sku":"FP-400-Perbunan-30l\/min","price":419.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_943c7d00-0941-416a-aa1a-748817e106cb.jpg?v=1757353390"},{"product_id":"fp-24-epdm-30l-min","title":"Impeller Pump 24 Volt, 30 l\/min, 3 bar, EPDM Impeller, Continuous Duty, Water Glycol","description":"\u003cp\u003eImpeller Pump 24 Volt, 30 l\/min, 3 bar, EPDM Impeller, Continuous Duty, Water Glycol\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water glycol in continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped, as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive constituents is available on request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to °C\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming max 7 m head, dry 3 m head\u003c\/p\u003e\n\n\u003cp\u003eImpeller EPDM, Bush Polyamide, Shaft seal Perbunan\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminium Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch male thread\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.25 kW\u003c\/p\u003e \n\n\u003cp\u003eDC version 24 Volt nominal voltage suitable for continuous operation\u003c\/p\u003e\n\n\u003cp\u003eSpeed 3000 rpm, 18 A\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812979245393,"sku":"FP-24-EPDM-30l\/min","price":886.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-12Volt-Fernbedienung-1_c6946471-6ea7-4cf3-8cee-130b7b01108a.jpg?v=1757353405"},{"product_id":"fp-400-perbunan-300l-min","title":"Impeller pump 400 Volt, max 300 l\/min, 2 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 300 l\/min, 2 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n \u003cp\u003eWe have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n\u003cp\u003e This is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e\n Bioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.5 kW, rated current (AC) 6 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​700 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 300 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 630 x 330 x 261 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 30 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812981735761,"sku":"FP-400-Perbunan-300l\/min","price":1784.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-400-Volt-4.jpg?v=1757353479"},{"product_id":"fp-230-perbunan-30l-min","title":"Impeller Pump 230 Volt, max. 30 l\/min, max. 5 bar, Perbunan Impeller, Water","description":"\u003cp\u003eImpeller Pump 230 Volt, 30 l\/min, 5 bar, Perbunan Impeller, water, heat transfer fluids, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, vegetable oils, cleaning agents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids may be conveyed with the media as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded fittings 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 U\/min\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51812986323281,"sku":"FP-230-Perbunan-30l\/min","price":406.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_ef1180db-f8e5-4a7d-afba-1c2312716a8a.jpg?v=1757353571"},{"product_id":"bp-alu-kunststoff-1-adapter","title":"Drill Pump Aluminum, dry self-priming, max 60 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eIt can therefore suck and push without changing the hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing it to a cordless screwdriver or drill with a drilling depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is carried out on your machine without additional tools and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller, operate in one direction of rotation only if possible\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drilling depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812988846417,"sku":"BP-Alu-Kunststoff-1-Adapter","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Bohrmaschinenpumpe_858d70ea-6546-42ea-a02f-d25c0054428e.jpg?v=1757353655"},{"product_id":"bp-alu-kunststoff-3-4-fuss","title":"Drill Pump Aluminum, dry self-priming, max 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the option of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eIt can therefore suck and discharge without changing the hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transfer.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find these under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eAlso optional is the stainless steel drill support shown. You can find the product under Pumps - Accessories.\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller should only be operated in one direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812992778577,"sku":"BP-Alu-Kunststoff-3\/4-Fuss","price":129.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-Bohrmaschinenpumpe-Fussgestell-1_7dd474d0-8812-4481-acd6-680ce397c765.jpg?v=1757353853"},{"product_id":"fp-230-kunststoff-30l-min","title":"Impeller Pump 230 Volt, 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller Pump 230 Volt, 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e\n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kw\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 U\/min or optionally 1400 U\/min\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812993728849,"sku":"FP-230-Kunststoff-30l\/min","price":482.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_f839cd2b-a390-4771-b262-1dfea4f10a0e.jpg?v=1757353920"},{"product_id":"ip-230-va-epdm-15l-min","title":"Impeller Pump 230 Volt, max. 15 l\/min, max. 3 bar, EPDM Impeller","description":"\u003cp\u003eImpeller Pump 230 Volt, 30 l\/min, 5 bar, Perbunan Impeller, Water, Heat Transfer Fluid, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped along as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to a depth of 3 m, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813002871121,"sku":"IP-230-VA-EPDM-15l\/min","price":694.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_121f875b-5a25-4002-80ee-09bae732079b.jpg?v=1757354263"},{"product_id":"fp-230-viton-30l-min","title":"Impeller pump 230 volts, max. 30 l\/min, max. 3 bar, Viton impeller","description":"\u003cp\u003eImpeller Pump 230 Volt, max. 30 l\/min, max. 3 bar, Viton Impeller\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, and cleaning agents.\u003c\/p\u003e\n\n\u003cp\u003eSolids may be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton (FKM)\u003c\/p\u003e\n\n\u003cp\u003ePump casing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Viton impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, vegetable oils, cleaning agents, antifreeze, and all media compatible with Viton and aluminum\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.4 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813003428177,"sku":"FP-230-Viton-30l\/min","price":589.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_d835b3f8-805e-442a-8989-12919705dfe8.jpg?v=1757354294"},{"product_id":"fp-230-epdm-fda-115-l-min-triac-fern","title":"Impeller pump 230 Volt, max. 115 l\/min, max 3 bar, bee feed syrup, remote control","description":"Impeller pump 230 Volt, max. 115 l\/min, max 3 bar, bee feed syrup, remote control\n\nThis bee feed pump has been extensively tested by us in \u003ca href=\"http:\/\/www.pumpen-peters.de\/blog\/post\/Bienen-Futter-Sirup-Pumpe-mit-230-Volt-Antrieb-f%C3%BCr-den-Imker\/56\/\"\u003epractice\u003c\/a\u003e.\n\nWe used the highly viscous syrup from API Alsace Ickowicz from France as feed syrup.\n\nThis is the thickest syrup known to us for bee feeding.\n\nOur syrup pump therefore also pumps bee feed, such as:\nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettler's feed syrup, Ambrosia, Api Gold, Api Royal Syrup, Butiforce, Apikel, Fructoplus, Apistar.\n\nSince the feedstuffs have different viscosities at different temperatures, here are some data as an example.\n\nTest basis:\n\nThe suction hose with an inner diameter of 50 mm is connected directly to the feed syrup IBC via a 2-inch hose nozzle.\n\nThe pressure line has an inner diameter of 38 mm and is fitted with a ball valve with a spout at the end.\n\nThe test results with different hose lengths at a syrup temperature of 20 ° C and a suction hose of 1 m length and 50 mm inner diameter:\n\n5 m hose length 75 l\/min\n\n10 m hose length 49 l\/min\n\n20 m hose length 29 l\/min\n\n25 m hose length 21 l\/min\n\nAll components used in the test, such as hoses, hose nozzles and ball valves, can be found in our shop.\n\nWe would be happy to put together your personal set.\n\nTechnical data:\n\nMotor 1.8 kw, 230 Volt, 11 A, reversing direction of rotation\n\nStarting current approx. 16 -18 A, when changing direction of rotation approx. 20 A\n\nSpeed 850 rpm\n\nFlow rate max. 115 l\/min calculated on water\n\nmax 3 bar\n\nImpeller EPDM with FDA approval, dry running max. 1 minute\n\nPump housing stainless steel\n\nThreaded nozzles 1 1\/2 inch external thread\n\nmax. 90 °C medium temperature\n\nProtection class IP 55\n\nDimensions: 338 x 180 x 215 mm\n\nWeight 36.5 kg\n\nThe pump will be shipped by freight forwarder, the costs are 72 € including VAT.","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813006999889,"sku":"FP-230-EPDM-FDA-115 l\/min-Triac-Fern","price":2778.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Futtersirup-Bienen-Pumpe_b13a9874-45ea-486d-8183-1e3c78c18aad.jpg?v=1757354490"},{"product_id":"bp-alu-kunststoff-1-fuss","title":"Drill Pump Aluminum, dry self-priming, max 60 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum attachment pump for drills is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eIt can therefore suck and push without changing the hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the button \"Hoses - Water Hoses\".\u003c\/p\u003e\n\n\u003cp\u003eThe drill stand shown in stainless steel is also optional. You can find the product under \"Pumps - Accessories\".\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain any abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller should only be operated in one direction of rotation if possible\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813013094737,"sku":"BP-Alu-Kunststoff-1-Fuss","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Bohrmaschinenantrieb-Fussgestell_de7de585-08d8-4e96-9edd-e02beba68819.jpg?v=1757354637"},{"product_id":"bp-alu-perbunan-1-adapter","title":"Drill pump, aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill pump attachment is dry self-priming and also offers the option of reversing the direction of rotation.\u003c\/p\u003e \n\n\u003cp\u003eIt can therefore suck and push without changing the hoses.\u003c\/p\u003e \n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is required for transfer.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of power failure.\u003c\/p\u003e\n\n\u003cp\u003eOptionally available are the hoses shown in various designs. These can be found under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing to a cordless drill or drill with a drilling depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is done without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\n\u003cp\u003eThe impeller made of Perbunan is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eProcess water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e \n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reverse rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e \n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drilling depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e \n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e \n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813013487953,"sku":"BP-Alu-Perbunan-1-Adapter","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinenpumpe-Impellerpumpe-1_55a70f98-f2cb-4a28-a2f3-9e9daff1730d.jpg?v=1757354653"},{"product_id":"fp-va-230-neoprene-15l-min","title":"Impeller Pump 230 Volt, stainless steel, max. 15 l\/min, max. 4 bar, Neoprene Impeller, Water","description":"\u003cp\u003eImpeller pump with mechanical seal\u003cbr\u003e\nMotor: 230 V, 50Hz, 3.2 A\u003cbr\u003e\n0.37 Kw, 1300 rpm, IP:55; 9.8 kg;\u003cbr\u003e\nPump: max. 15 liters\/min, max. 4 bar\u003cbr\u003e\nConnections ¾\" male thread\u003cbr\u003e\nImpeller Neoprene®\u003cbr\u003e\nMechanical seal Carbon\/Ceramic\/FKM\u003cbr\u003e\nPump casing stainless steel\u003cbr\u003e\nPump flanged directly to motor shaft\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813020533073,"sku":"FP-VA-230-Neoprene-15l\/min","price":972.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_4f88794a-dae9-4da5-80e8-61fb2943b2bb.jpg?v=1757354971"},{"product_id":"fp-230-kunststoff-60l-min","title":"Impeller pump 230 Volt, 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil","description":"\u003cp\u003eImpeller pump 230 volt, 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m head\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.55 kw\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813027545425,"sku":"FP-230-Kunststoff-60l\/min","price":514.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_9009b25b-9d49-4510-9046-9cd124a81819.jpg?v=1757355025"},{"product_id":"fp-400-kunststoff-30l-min","title":"Impeller Pump 400 Volt, 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller Pump 400 Volt, 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller blades and are not abrasive.\u003c\/p\u003e\n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic (NBR)\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch female thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e\n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813027709265,"sku":"FP-400-Kunststoff-30l\/min","price":516.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-230Volt_ad2da4ac-8051-46ee-b24a-ed43fb342e69.jpg?v=1757355030"},{"product_id":"bp-alu-perbunan-3-4-fuss","title":"Drill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum attachment pump for drills is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and pump without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is required for transfer.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find these under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e\n\n\u003cp\u003eAlso optionally available is the illustrated stainless steel drill support. You can find this product under \"Pumps - Accessories\".\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reversing direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C medium temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813028790609,"sku":"BP-Alu-Perbunan-3\/4-Fuss","price":129.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-Bohrmaschinenpumpe-Fussgestell_441cdb52-70be-454c-84ca-71973a068113.jpg?v=1757355051"},{"product_id":"fp-12-perbunan-30l-min","title":"Impeller Pump 12 Volt, 30 l\/min, 5 bar, Perbunan Impeller, water, cleaning agents, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 5 bar, Perbunan Impeller, Water, Detergents, Heat Transfer Fluids, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids may be pumped with the media as long as they fit between the impeller blades and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan® (NBR), Bushing material Polyamide\u003c\/p\u003e\n\n\u003cp\u003ePump housing material Aluminum EN AW-6060\/AC-43400 with pump bracket\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller.\u003c\/p\u003e \n\n\u003cp\u003eThe fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003eMotor 0.35 kW to 0.5 kW, depending on motor speed\u003c\/p\u003e\n\n\u003cp\u003eDC version 12 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 1500 rpm 39 A, or optionally 3000 rpm 42 A\u003c\/p\u003e\n\n\u003cp\u003eRotation direction left\/right\u003c\/p\u003e\n\n\u003cp\u003eElectrical connection terminal block\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 44\u003c\/p\u003e\n\n\u003cp\u003eOperating mode S2, max. 30 min operating time, then appropriate cooling phase\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e\n\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813029151057,"sku":"FP-12-Perbunan-30l\/min","price":1020.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-12V-Gleichstrom_d7d9dfac-fefd-4027-ad92-250c012f8c85.jpg?v=1757355092"},{"product_id":"fp-12-viton-30l-min","title":"Impeller Pump 12 Volt, 30 l\/min, 5 bar, Viton Impeller, Diesel","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 5 bar, Viton Impeller, water, detergents, heat transfer fluids, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids can be pumped with the media, as long as they fit between the impeller blades and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton, bushing material Polyamide\u003c\/p\u003e\n\n\u003cp\u003ePump housing material Aluminum EN AW-6060\/AC-43400 with pump support\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Viton impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eDomestic water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller.\u003c\/p\u003e \n\n\u003cp\u003eThe fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003eMotor 0.35 kW to 0.5 kW, depending on motor speed\u003c\/p\u003e\n\n\u003cp\u003eDC version 12 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 1500 rpm 39 A, or optionally 3000 rpm 42 A\u003c\/p\u003e\n\n\u003cp\u003eRotation direction left\/right\u003c\/p\u003e\n\n\u003cp\u003eElectrical connection terminal board\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 44\u003c\/p\u003e\n\n\u003cp\u003eOperating mode S2, max. 30 min operating time, then appropriate cooling phase\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e\n\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813029183825,"sku":"FP-12-Viton-30l\/min","price":940.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-12V-Gleichstrom-1_6b7a1529-0f5c-4a12-ab61-87b44f9ff1c8.jpg?v=1757355100"},{"product_id":"fp-12-kunststoff-30l-min","title":"Impeller pump 12 volt, 30 l\/min, 5 bar, plastic impeller, Impeller pump 12 volt, 30 l\/min, 5 bar, plastic diesel, heating oil, mineral oil","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 5 bar, plastic, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is designed for pumping diesel, heating oil, and mineral oil.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller vanes and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic (TPU), bushing material polyamide\u003c\/p\u003e\n\n\u003cp\u003ePump casing material aluminum EN AW-6060\/AC-43400 with pump bracket\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eDiesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller.\u003c\/p\u003e\n\n\u003cp\u003eThe fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003eMotor 0.35 kw to 0.5 kw, depending on motor speed\u003c\/p\u003e\n\n\u003cp\u003eDC version 12 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eSpeed 1500 rpm 39 A, or optionally 3000 rpm 42 A\u003c\/p\u003e\n\n\u003cp\u003eRotation direction right\u003c\/p\u003e\n\n\u003cp\u003eElectrical connection terminal board\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 44\u003c\/p\u003e\n\n\u003cp\u003eOperating mode S2, max. 30 min operating time, then corresponding cooling phase\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813029314897,"sku":"FP-12-Kunststoff-30l\/min","price":1020.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-12V-Gleichstrom_a65f8cff-0f5b-42bf-ab5a-702d4932acfc.jpg?v=1757355111"},{"product_id":"fp-24-perbunan-30l-min","title":"Impeller pump, 24 volt, 30 l\/min, 5 bar, Perbunan impeller, water, detergents, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 24 Volt, 30 l\/min, 5 bar, Perbunan Impeller, Water, Detergents, Heat Transfer Fluids, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped along, as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan® (NBR), Bushing material Polyamide\u003c\/p\u003e\n\n\u003cp\u003ePump housing material Aluminum EN AW-6060\/AC-43400 with pump bracket\u003c\/p\u003e\n\n\u003cp\u003ePump shaft stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped along in the impeller.\u003c\/p\u003e \n\n\u003cp\u003eThe fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003eDC version 24 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eRated power 0.25 kW, Rated current (DC) 12 A max. speed 3000 min-1\u003c\/p\u003e\n\n\u003cp\u003eRotation direction left\/right\u003c\/p\u003e\n\n\u003cp\u003eElectrical connection terminal block\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eOperating mode S1, continuous operation\u003c\/p\u003e\n\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51813029347665,"sku":"FP-24-Perbunan-30l\/min","price":1020.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe-12V-Gleichstrom_0f289445-066f-4039-bbe3-dec0b1393b29.jpg?v=1757355119"},{"product_id":"bp-va-neopren-3-4-fuss","title":"Drill pump stainless steel, dry self-priming, max 30 l\/min, Neoprene impeller, foot","description":"\u003cp\u003eDrill pump stainless steel, dry self-priming, max 30 l\/min, Neoprene Impeller, Base\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e \n\n\u003cp\u003eTherefore, it can suck and pump without changing hoses.\u003c\/p\u003e \n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs.\u003c\/p\u003e \n\n\u003cp\u003eYou can find them under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e \n\n\u003cp\u003eAlso optional is the depicted drill stand made of stainless steel. You can find this product under \"Pumps - Accessories\".\u003c\/p\u003e \n\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eFoodstuffs\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed by the impeller. The fluid may contain abrasive substances and slightly corrosive media.\u003c\/p\u003e \n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eDry running time max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e \n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e  \n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eNeoprene impeller, preferably operate in only one direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump body stainless steel 1.4404\u003c\/p\u003e \n\n\u003cp\u003ePump shaft stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame stainless steel with 5 mm mounting holes\u003c\/p\u003e \n\n\u003cp\u003eThread 3\/4 inch double-sided external thread\u003c\/p\u003e \n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eWeight 600 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51823395340625,"sku":"BP-VA-Neopren-3\/4-Fuss","price":314.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinenpumpe-Edelstahl-1_5dfffb4c-0022-4285-957b-56117682c5ea.jpg?v=1757352096"},{"product_id":"fp-12-viton-15l-min","title":"Impeller pump 12 volt, 15 l\/min, 3 bar, Viton impeller, continuous duty, oils","description":"\u003cp\u003eImpeller Pump 12 Volt, 15 l\/min, 4 bar, Viton Impeller, Continuous Duty, Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for continuous pumping of oils.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive constituents is available on request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 15 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 90 °C\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 3\/4 inch male thread\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eDC version 12 Volt nominal voltage suitable for continuous operation\u003c\/p\u003e\n\n\u003cp\u003eSpeed 1500 rpm, 50 A\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51823396716881,"sku":"FP-12-Viton-15l\/min","price":1114.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-12Volt-Fernbedienung-1_9969f5b1-1b1e-4e11-afbc-5b7c54c0c25a.jpg?v=1757352176"},{"product_id":"ip-12-24-perbunan-16-32-1","title":"Impeller pump 12\/24 Volt, 16\/32 l\/min, 1 inch, 1.5\/2.5 bar, Perbunan impeller","description":"\u003cp\u003eImpeller Pump 12\/24 Volt, 16\/32 l\/min, 1 inch, 1.5\/2.5 bar, Perbunan Impeller\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, oil, diesel, and other media.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e\n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eLikewise, a different material combination for the impeller and seals can be selected.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth; otherwise, up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\u003cp\u003eThis impeller pump features a multivoltage motor and can be operated with 12 V or 24 V.\u003c\/p\u003e\n\n\u003cp\u003eThe speed and thus the flow rates change according to the voltage.\u003c\/p\u003e\n\n\u003cp\u003eA sample photo shows the product with plug and cable.\u003c\/p\u003e\n\n\u003cp\u003eOther versions are possible.\u003c\/p\u003e\n\n\u003cp\u003ePlease inquire about these.\u003c\/p\u003e\n\n\u003cp\u003eWe will be happy to advise you individually according to your application.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data for 12 Volt voltage:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 16 l\/min (medium water)\u003c\/p\u003e\n\n\u003cp\u003emax. 1.5 bar\u003c\/p\u003e\n\n\u003cp\u003eRated power 0.35 kW\u003c\/p\u003e\n\n\u003cp\u003eRated current (DC) Inrush current 17 A, Operating current 12 A\u003c\/p\u003e\n\n\u003cp\u003emax. speed 980 min-1\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data for 24 Volt voltage:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 32 l\/min (medium water)\u003c\/p\u003e\n\n\u003cp\u003emax. 2.5 bar\u003c\/p\u003e\n\n\u003cp\u003eRated power 0.45 kW\u003c\/p\u003e\n\n\u003cp\u003eRated current (DC) Inrush current 20 A, Operating current 15 A\u003c\/p\u003e\n\n\u003cp\u003emax. speed 1700 min-1\u003c\/p\u003e\n\n\n\u003cp\u003eOperating time: 10 min. load \/ 20 min. break.\u003c\/p\u003e\n\n\n\n\u003cp\u003eImpeller Perbunan, Bushing Polyamide (other versions possible)\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum EN AW-6060\/AC-43400\u003c\/p\u003e\n\n\u003cp\u003eMotor shaft S-WE 14x37.5\u003c\/p\u003e\n\n\u003cp\u003eExternal thread 1 inch\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 44\u003c\/p\u003e\n\n\u003cp\u003eWeight 3.1 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51823399829841,"sku":"IP-12\/24-Perbunan-16\/32-1","price":740.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Gleichstrom-1_faabad8b-61cb-4565-bb51-ecf77fffba6b.jpg?v=1757352327"},{"product_id":"fp-230-perbunan-90l-min","title":"Impeller Pump 230 Volt, 90 l\/min, Reversible, 5 bar, Perbunan Impeller, Water, Heat Transfer Fluids, Vegetable Oils","description":"\u003cp\u003eImpeller Pump 230 Volt, 90 l\/min, Reversible Direction, 5 bar, Perbunan Impeller, Water, Heat Transfer Fluids, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\u003cp\u003eThe motor has reversible direction. The pump therefore runs in both directions and saves the need to swap hoses.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nService water, heating oil, diesel, oil, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kw\u003c\/p\u003e \n\n\u003cp\u003eVersion AC 230 Volt rated voltage, reversible direction\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51823402942801,"sku":"FP-230-Perbunan-90l\/min","price":854.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_0c4424cc-5557-4b1b-8cf5-90d3169bb63f.jpg?v=1757352442"},{"product_id":"fp-230-viton-90l-min","title":"Impeller pump 230 Volt, 90 l\/min, 3 bar, Viton impeller, oil. Diesel, wood preservatives","description":"\u003cp\u003eImpeller Pump 230 Volt, 90 l\/min, 3 bar, Viton Impeller, Oil. Diesel, Wood Preservatives\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and heat transfer fluids for solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive contents is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nOil, diesel, heating oil, palm oil, soybean oil, oil-based wood preservatives\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kw\u003c\/p\u003e \n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e \n\n\u003cp\u003eDimensions 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"TBS Technischer Bedarf GmbH unter 20 € Mindermengenzuschlag von 5,00 € + 5,50 € Versand","offers":[{"title":"Default Title","offer_id":51823404581201,"sku":"FP-230-Viton-90l\/min","price":920.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe_1502abc4-95f3-4fe0-a42c-c0512100d433.jpg?v=1757352509"}],"url":"https:\/\/www.pumpen-peters.de\/en\/collections\/impellerpumpen\/pumpen.oembed?page=2","provider":"Pumpen-Peters und Zubehör","version":"1.0","type":"link"}