{"title":"Pumps-Peters und Accessories","description":null,"products":[{"product_id":"ds-19-k-6","title":"Dispensing hose, diesel hose, fuel hose, 3\/4 inch, 6 m, diesel, heating oil, 1 inch male thread","description":"\u003cp\u003eDispensing hose, diesel hose, tank hose, 3\/4 inch, 6 m, diesel, heating oil, 1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003e6 meter 3\/4 inch hose, pre-assembled with crimped 1 inch connections, 1 inch external thread on both sides\u003c\/p\u003e \n\n\u003cp\u003eThis pressure hose is suitable for conveying heating oil, gasoline, diesel, oils and greases with a max. aromatic content of 50%.\u003c\/p\u003e \n\n\u003cp\u003eWhen used with gasoline, the medium must not remain in the hose, but only be passed through. If you need a hose in which the gasoline remains after refueling, please ask us for a tanker hose for gasoline.\u003c\/p\u003e \n\n\n\u003cp\u003eWith the help of the optional swivel coupling shown, the handling of the fuel nozzle and tank hose is significantly facilitated.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying untangling of the hose is eliminated. This extends the life of the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the fuel nozzle and then connected to the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, it is also recommended to install this swivel screw connection at the pump outlet.\u003c\/p\u003e \n\n\u003cp\u003eFor insertion and sealing, we recommend using our thread sealant. The sealant is medium strength and re-releasable.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel coupling product can be found under the \"Hose accessories\" button.\u003c\/p\u003e \n\n\n\u003cp\u003eTechnical details:\u003c\/p\u003e \n\n\u003cp\u003e6 meter hose length 3\/4 inch\u003c\/p\u003e \n\n\u003cp\u003e1 inch external thread crimped on both sides\u003c\/p\u003e \n\n\u003cp\u003e3\/4 inch ID 19 mm\u003c\/p\u003e \n\n\u003cp\u003e27 mm OD\u003c\/p\u003e \n\n\u003cp\u003emax 10 bar operating pressure\u003c\/p\u003e \n\n\u003cp\u003eBursting pressure 30 bar\u003c\/p\u003e \n\n\u003cp\u003eTemperature range from -25° C\/+80° C for oil up to +100° C\u003c\/p\u003e \n\n\u003cp\u003eLining NBR black smooth\u003c\/p\u003e \n\n\u003cp\u003eCover NBR\/EPDM, black smooth, antistatic R\u0026lt;1MOhm\/m, abrasion resistant, oil, fuel and weather resistant\u003c\/p\u003e \n\n\u003cp\u003eReinforcements spiralized synthetic textile threads\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919083345,"sku":"DS-19-K-6","price":105.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Tankschlauch_7107f0f4-8772-4d4f-a153-04c6c66af77f.jpg?v=1757351881"},{"product_id":"svgsl-25","title":"Hose connector 25 mm, metal, galvanized steel, water, oil, diesel, heating oil, petrol","description":"\u003cp\u003e Hose connector 25 mm 1 inch, metal, galvanized steel, water, oil, diesel, heating oil, petrol\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 16 cm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle 60.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 25 - 26.3 - 26.4 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Inner diameter 21.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 183 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919116113,"sku":"SVGSL-25","price":6.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-Stahl-3.jpg?v=1757351883"},{"product_id":"rsv-lose-18","title":"Check valve, diaphragm, spring, diesel, fuel, water, air, 18 mm OD","description":"\u003cp\u003e Check valve, diaphragm, spring, diesel, fuel, water, air, 18 mm OD\u003c\/p\u003e\n\n\n\u003cp\u003e This spring-loaded check valve works with an internal diaphragm as a sealing element.\u003c\/p\u003e\n\n\n\u003cp\u003e These check valves are suitable, for example, for building a tank ventilation system, as can be seen in the example photo.\u003c\/p\u003e\n\n\n\u003cp\u003e BOSCH 2.447.419.002\u003c\/p\u003e\n\n\n\n\u003cp\u003e Opening pressure 0.2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 18.2 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter rear body 12.87 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Total height 8.62 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Rear body height 5.47 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Sealing material NBR\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 6 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919247185,"sku":"RSV-lose-18","price":3.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Rueckschlagventil-Membrane.jpg?v=1757351887"},{"product_id":"handpumpe-kurbel-wasser-kit","title":"Hand pump water, crank pump, 200 l barrels, kit","description":"\u003cp\u003eHand Pump for Water, Crank Pump, 200 L Barrels, Kit\u003c\/p\u003e\n\n\u003cp\u003eWith this equipment, you can pump particle-free water independently of the power grid.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel casing, in particular, emphasizes its use in professional applications.\u003c\/p\u003e\n\n\u003cp\u003eThe volumetric flow rate is 38 liters per 100 revolutions.\u003c\/p\u003e\n\n\u003cp\u003eThis water crank pump is self-priming with simple and immediate delivery of the medium.\u003c\/p\u003e\n\n\u003cp\u003eThe suction tube is suitable for barrels from 60 - 200 liters.\u003c\/p\u003e\n\n\u003cp\u003eThe included barrel adapter fits into the openings of 200 L barrels.\u003c\/p\u003e\n\n\u003cp\u003eComplete with 2.50 m delivery hose and stainless steel spout.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e\n\n\u003cp\u003eMedium: Water, free of foreign substances and abrasive particles\u003c\/p\u003e\n\n\u003cp\u003e38 liters per 100 revolutions\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height: 1.5 m\u003c\/p\u003e\n\n\u003cp\u003eMax. delivery height: 5 m\u003c\/p\u003e\n\n\u003cp\u003eDelivery hose: 2.50 m\u003c\/p\u003e\n\n\u003cp\u003ePlug-in suction tube for 200 L barrels\u003c\/p\u003e\n\n\u003cp\u003eBarrel adapter: 2\" BSP, 56x4 and 70x6\u003c\/p\u003e\n\n\u003cp\u003eWeight: 3.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919443793,"sku":"Handpumpe-Kurbel-Wasser-Kit","price":180.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kurbelpumpe-Wasser_fbce85b2-32aa-42c9-9f39-30bb491b518e.jpg?v=1757351894"},{"product_id":"handpumpe-kurbel-frostschutz-kit","title":"Hand pump antifreeze, crank pump, 200 l drums, kit","description":"\u003cp\u003eHand Pump Antifreeze, Crank Pump, 200 L Drums, Kit\u003c\/p\u003e\n\n\u003cp\u003eWith this equipment, you can pump antifreeze independently of the power grid.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel casing, in particular, emphasizes its use in professional applications.\u003c\/p\u003e\n\n\u003cp\u003eThe full volumetric output is 38 liters per 100 revolutions.\u003c\/p\u003e\n\n\u003cp\u003eThe pump must be filled once with 150 ml of antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eAfter that, this antifreeze crank pump is self-priming with simple and immediate delivery of the medium.\u003c\/p\u003e\n\n\u003cp\u003eThe suction tube is suitable for 60 - 200 liter drums.\u003c\/p\u003e\n\n\u003cp\u003eThe included drum adapter fits into the openings of 200 L drums.\u003c\/p\u003e\n\n\u003cp\u003eComplete with 2.50 m discharge hose and stainless steel spout.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Data:\u003c\/p\u003e\n\n\u003cp\u003eMedium: Antifreeze\u003c\/p\u003e\n\n\u003cp\u003e38 liters per 100 revolutions\u003c\/p\u003e\n\n\u003cp\u003eRotates clockwise only\u003c\/p\u003e\n\n\u003cp\u003eMax. suction height: 1.5 m\u003c\/p\u003e\n\n\u003cp\u003eMax. discharge height: 5 m\u003c\/p\u003e\n\n\u003cp\u003eDischarge hose: 2.50 m\u003c\/p\u003e\n\n\u003cp\u003ePlug-in suction tube for 200 L drums\u003c\/p\u003e\n\n\u003cp\u003eDrum adapter: 2\" BSP, 56x4 and 70x6\u003c\/p\u003e\n\n\u003cp\u003eWeight: 3.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919476561,"sku":"Handpumpe-Kurbel-Frostschutz-Kit","price":180.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kurbelpumpe-Wasser_7f9ce8d4-b5db-4cb4-8b65-6cab604800d4.jpg?v=1757351898"},{"product_id":"svgva-8-8","title":"Hose connector 8-8 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003e Hose connector 8-8 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting two hoses with an inner diameter of 8 mm.\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 7.46 - 8 mm (corrugation inside - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 5.9 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 50 mm\u003c\/p\u003e\n\n\n \u003cp\u003eMaterial: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 8 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919607633,"sku":"SVGVA-8-8","price":4.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-Edelstahl-gerade-8mm_625ae0a3-c552-4f14-8e9e-f3d27d9b7c18.jpg?v=1757351904"},{"product_id":"st-32-sk-1-1-4-v4a","title":"Hose nozzle 32 mm, 1 1\/4 inch thread, conical, stainless steel V4A","description":"\u003cp\u003e Hose nozzle 32 mm, 1 1\/4 inch thread, conical, stainless steel V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Hose nozzle, R 11\/4\" inch thread, conical, for 32 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e The thread is a BSPT tapered Whitworth pipe thread DIN 2999\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Material V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread DIN 2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure: 10 bar\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919869777,"sku":"ST-32-SK-1 1\/4-V4A","price":15.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-konisch-1Zoll-Edelstahl_9e9afa1a-6ba4-4fdf-a2ae-d378d36b1eb8.jpg?v=1757351913"},{"product_id":"svuva-6","title":"Hose connector 180 degree bend 6 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003eHose connector 180 degree bend 6 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting 2 hoses with 6 mm inner diameter.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Outer diameter of 6.33 - 6.92 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 5.06 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Overall length 42 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Width U bend 32.17 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 11 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812919935313,"sku":"SVUVA-6","price":5.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-180-Grad-Umkehrbogen.jpg?v=1757351915"},{"product_id":"mva-2","title":"2 inch stainless steel sleeve","description":"\u003cp\u003e 2 inch stainless steel sleeve\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923015505,"sku":"MVA-2","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_0287e6e1-88c9-4a6f-8ee6-405cae503a98.jpg?v=1757351920"},{"product_id":"dk-1-ag","title":"Swivel Coupling, Swivel Joint, 1 Inch Male\/Male","description":"\u003cp\u003eSwivel coupling, swivel joint, 1 inch male\/male\u003c\/p\u003e\n\n\u003cp\u003eThis swivel coupling significantly eases the handling of the nozzle and fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying tangling of the hose is eliminated. This extends the lifespan of the fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the nozzle and then connected to the fuel hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, we recommend installing this swivel fitting at the pump outlet as well.\u003c\/p\u003e \n\n\u003cp\u003eFor installation and sealing, we recommend using our thread sealant. The sealant is medium strength and re-detachable.\u003c\/p\u003e \n\n\n\u003cp\u003eExternal thread: 1 inch BSPT external thread (Tapered Whitworth pipe thread DIN 2999)\u003c\/p\u003e \n\n\u003cp\u003eExternal thread: 1 inch\u003c\/p\u003e\n\n\n\u003cp\u003eMaterial swivel joint: Aluminum body and brass bushing, Viton seal\u003c\/p\u003e\n\n\u003cp\u003eMaterial double nipple: Brass\u003c\/p\u003e\n\n\u003cp\u003eTotal length: 72 mm\u003c\/p\u003e\n\n\u003cp\u003eWrench size: 38 mm\u003c\/p\u003e\n\n\u003cp\u003eThrough bore: 16 mm\u003c\/p\u003e\n\n\u003cp\u003eNormal working pressure is 1.8 to 2 bar, max. pressure is 4 to 5 bar\u003c\/p\u003e\n\n\u003cp\u003eAt high pressures, the rotatability is significantly reduced, leading to high stress and wear. We therefore advise against using pressures greater than 2 bar.\u003c\/p\u003e\n\n\u003cp\u003eWeight: 224 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923081041,"sku":"DK-1-AG","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Drehkupplung-AG-AG-1Zoll_7d668e02-63ca-4558-88cd-f7cb34fa4013.jpg?v=1757351924"},{"product_id":"bp-alu-kunststoff-3-4-adapter","title":"Drill Pump Aluminum, dry self-priming, max 30 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 30 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the option of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eSo it can suck and pump without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eIn this version with a plastic impeller, operation in only one direction of rotation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely light universal impeller pump can be used wherever a dry self-priming pump is required for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eUsing a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of a power failure.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the button Hoses - Water Hoses.\u003c\/p\u003e\n\n\u003cp\u003eThe pump has a holder for fixing to a cordless screwdriver or drill with a depth stop.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is done without additional tools on your machine and is completed in one minute.\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 30 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 500 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 U\/min\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003ePlastic impeller should preferably be operated in only one direction of rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eHolder for drill depth stop\u003c\/p\u003e\n\n\u003cp\u003eThread 3\/4 inch double external thread\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 544 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923179345,"sku":"BP-Alu-Kunststoff-3\/4-Adapter","price":129.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Bohrmaschinen-Vorsatzpumpe-1_7a1132bf-9fde-405b-80d8-5dc4aadb1b46.jpg?v=1757351934"},{"product_id":"kht-1-1-4","title":"Ball valve, 1 1\/4 inch female thread, full bore, temperature stable, lever handle","description":"\u003cp\u003e Ball valve, 1 1\/4 inch female thread, full bore, temperature stable, lever handle\u003c\/p\u003e\n\n\n \u003cp\u003enickel-plated brass\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 79.36 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Ball brass hard chrome-plated\u003c\/p\u003e\n\n\n\u003cp\u003e Seal Teflon\/NBR\u003c\/p\u003e\n\n\n\u003cp\u003e max. 16 bar operating pressure\u003c\/p\u003e\n\n\n\u003cp\u003e Lever length 116 mm from center of attachment\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 46\u003c\/p\u003e\n\n\n\u003cp\u003e Temperature range -10 to +80°C (depending on operating pressure)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 524 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923277649,"sku":"KHT-1 1\/4","price":20.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Kugelhahn-Zoll-Innengewinde.jpg?v=1757351941"},{"product_id":"ds-19-k-4","title":"Dispensing hose, diesel hose, fuel hose, 3\/4 inch, 4 m, diesel, heating oil, 1 inch male thread","description":"\u003cp\u003eDispensing hose, diesel hose, tank hose, 3\/4 inch, 4 m, diesel, heating oil, 1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003e4 meters of 3\/4 inch hose, pre-assembled with crimped 1 inch connectors, 1 inch external thread on both sides\u003c\/p\u003e \n\n\u003cp\u003eThis pressure hose is suitable for conveying heating oil, gasoline, diesel, oils and greases with a max. aromatic content of 50%.\u003c\/p\u003e \n\n\u003cp\u003eWhen used with gasoline, the medium must not remain in the hose, but only be passed through. If you need a hose in which the gasoline remains even after refueling, please ask us for a tanker hose for gasoline.\u003c\/p\u003e \n\n\n\u003cp\u003eWith the help of the optional swivel coupling shown, the handling of the nozzle and tank hose is considerably simplified.\u003c\/p\u003e \n\n\u003cp\u003eThe annoying untangling of the hose is eliminated. This extends the service life of the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel joint is screwed into the inlet of the nozzle and then connected to the tank hose.\u003c\/p\u003e \n\n\u003cp\u003eFor long hoses, it is also recommended to mount this swivel fitting at the pump outlet.\u003c\/p\u003e \n\n\u003cp\u003eFor insertion and sealing, we recommend using our thread sealant. The sealant is medium-strength and re-detachable.\u003c\/p\u003e \n\n\u003cp\u003eThe swivel coupling product can be found under the hose accessories button.\u003c\/p\u003e \n\n\n\u003cp\u003eTechnical details:\u003c\/p\u003e \n\n\u003cp\u003e4 meters hose length 3\/4 inch\u003c\/p\u003e \n\n\u003cp\u003e1 inch external thread crimped on both sides\u003c\/p\u003e \n\n\u003cp\u003e3\/4 inch ID 19 mm\u003c\/p\u003e \n\n\u003cp\u003e27 mm OD\u003c\/p\u003e \n\n\u003cp\u003emax 10 bar operating pressure\u003c\/p\u003e \n\n\u003cp\u003eBursting pressure 30 bar\u003c\/p\u003e \n\n\u003cp\u003eTemperature range from -25° C\/+80° C for oil up to +100° C\u003c\/p\u003e \n\n\u003cp\u003eTube NBR black smooth\u003c\/p\u003e \n\n\u003cp\u003eCover NBR\/EPDM, black smooth, antistatic R\u0026lt;1MOhm\/m, abrasion resistant, oil, fuel and weather resistant\u003c\/p\u003e \n\n\u003cp\u003eReinforcement spiralized synthetic textile threads\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812923375953,"sku":"DS-19-K-4","price":75.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Tankschlauch_e79a5bcf-2921-4106-a2ce-aa081bfd2018.jpg?v=1757351945"},{"product_id":"zp-40-adblue-ig-1","title":"AdBlue nozzle, up to 40 l\/min, automatic shut-off, swivel, 1 inch IG","description":"\u003cp\u003eAdBlue dispensing nozzle, up to 40 l\/min, automatic shut-off, swivel joint, 1 inch female thread\u003c\/p\u003e\n\n\u003cp\u003eThis special dispensing nozzle is designed for dispensing AdBlue.\u003c\/p\u003e\n\n\u003cp\u003eThe dispensing nozzle is made of stainless steel and has Viton O-rings.\u003c\/p\u003e\n\n\u003cp\u003eThe ergonomics of this dispensing nozzle are excellent.\u003c\/p\u003e\n\n\n\u003cp\u003emax. 40 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 3.4 bar\u003c\/p\u003e\n\n\u003cp\u003eMedium AdBlue\u003c\/p\u003e\n\n\u003cp\u003elockable in two stages\u003c\/p\u003e\n\n\u003cp\u003eSpout diameter 16 mm\u003c\/p\u003e\n\n\u003cp\u003eStainless steel swivel coupling with 1 inch female thread\u003c\/p\u003e\n\n\u003cp\u003eautomatic shut-off\u003c\/p\u003e\n\n\u003cp\u003eWeight 2.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946411857,"sku":"ZP-40-AdBlue-IG-1","price":316.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zapfpistole-Edelstahl-Wasser_23898840-6326-44e3-a1cb-8869b25d3618.jpg?v=1757352518"},{"product_id":"st-4-3-8-va","title":"Hose nozzle 4 mm, 3\/8 inch thread, cylindrical, stainless steel","description":"\u003cp\u003e Hose nozzle 4 mm, 3\/8 inch thread, cylindrical, stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e 1 piece hose nozzle, 3\/8 inch thread, straight, for 4 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Material: stainless steel 1.4571\u003cbr\u003e\n PN 40 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 19\u003c\/p\u003e\n\n\n\u003cp\u003e Weight: 22.3 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946477393,"sku":"ST-4-3\/8-VA","price":21.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-Zoll-Edelstahl_b4cfd68c-23bf-4d86-b568-1255a034240a.jpg?v=1757352520"},{"product_id":"bp-alu-perbunan-1-fuss","title":"Drill pump, aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils","description":"\u003cp\u003eDrill pump aluminum, dry self-priming, max 60 l\/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThe aluminum drill attachment pump is dry self-priming and also offers the possibility of reversing the direction of rotation.\u003c\/p\u003e\n\n\u003cp\u003eThus, it can both suck and push without changing hoses.\u003c\/p\u003e\n\n\u003cp\u003eThis extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is needed for transferring liquids.\u003c\/p\u003e\n\n\u003cp\u003eWith a cordless drill and this pump, it can be used as a bilge pump on a boat in case of a power outage.\u003c\/p\u003e\n\n\u003cp\u003eThe hoses shown are optionally available in various designs. You can find them under the \"Hoses - Water Hoses\" button.\u003c\/p\u003e\n\n\u003cp\u003eThe stainless steel drill support shown is also optional. You can find the product under \"Pumps - Accessories.\"\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eService water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed by the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eDry run duration max. 1 minute\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max. 60 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eMinimum drive power 700 W\u003c\/p\u003e\n\n\u003cp\u003emax. 2900 rpm\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max. 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Perbunan (NBR) well suited for reverse rotation\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104 with 10 mm diameter\u003c\/p\u003e\n\n\u003cp\u003eBase frame Stainless steel with 5 mm mounting holes\u003c\/p\u003e\n\n\u003cp\u003eThread 1 inch external thread on both sides\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eWeight 825 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946542929,"sku":"BP-Alu-Perbunan-1-Fuss","price":162.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Bohrmaschinenantrieb-Fussgestell_22a93b5d-9195-402b-8378-3c235e17b7cb.jpg?v=1757352529"},{"product_id":"svtkr-8-12-8","title":"Hose connector T piece reduced 8 - 12 - 8 mm, plastic, POM, water, diesel, air, petrol","description":"\u003cp\u003e Hose connector T piece reduced AD 8 - 12 - 8 Made of plastic for connecting hoses with ID 8 - 12 - 8 mm.\u003c\/p\u003e\n\n\n\u003cp\u003e Temperature range -0°C to + 80°C\u003c\/p\u003e\n\n\n\n\u003cp\u003e Please only use these hose connectors for the specified temperature range.\u003c\/p\u003e\n\n\n\u003cp\u003e If you require a wider temperature range, use our metal hose connectors.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Total length across the horizontal side 56.9 mm, vertical side 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle large diameter 28 mm, small diameter 22 mm\u003c\/p\u003e\n\n\n \u003cp\u003eOuter diameter 8 mm from 8 - 9 - 9.9 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 12 mm from 12 - 12.7 - 13.8 mm (grooving inside - middle - outside)\u003c\/p\u003e\n\n\n\u003cp\u003e Inner diameter large diameter 9.7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter small diameter 6.6 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 10 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946575697,"sku":"SVTKR-8-12-8","price":4.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-reduzierend_25563757-c931-4a3d-bfe4-097c8b05de7d.jpg?v=1757352531"},{"product_id":"fp-400-perbunan-200l-min","title":"Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 200 l\/min, 2 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n\u003cp\u003e This is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e \nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.25 kW, rated current (AC) 4 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​470 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 200 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 2 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 514 x 275 x 225 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 38 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946608465,"sku":"FP-400-Perbunan-200l\/min","price":2230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-400-Volt-3.jpg?v=1757352533"},{"product_id":"fp-12-perbunan-60l-min","title":"Impeller Pump 12 Volt, 60 l\/min, 5 bar, Perbunan Impeller, Continuous Operation, Water","description":"\u003cp\u003eImpeller Pump 12 Volt, 30 l\/min, 4 bar, Viton Impeller, Continuous Duty, Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping oils in continuous operation.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped along as long as they fit between the impeller vanes and are not abrasive.\u003c\/p\u003e \n\n\u003cp\u003eA version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 30 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 90 ° C\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming max 7 m height, dry 3 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 inch male thread\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.37 kW\u003c\/p\u003e \n\n\u003cp\u003eDC version 12 Volt nominal voltage, suitable for continuous duty\u003c\/p\u003e\n\n\u003cp\u003eSpeed 1500 rpm, 50 A\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946706769,"sku":"FP-12-Perbunan-60l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-12Volt-Fernbedienung-1_f8046b4a-7e7c-4266-b27a-7647b17236ff.jpg?v=1757352541"},{"product_id":"pa-6-id","title":"Petrol hose, fuel hose, 6 mm, polyamide (PA), diesel","description":"\u003cp\u003e Petrol hose, fuel hose, diesel, 6\/8 mm ID\/AD, polyamide (PA)\u003c\/p\u003e\n\n\n\u003cp\u003e The fuel hose is almost transparent and therefore offers a good inspection option.\u003c\/p\u003e\n\n\n\u003cp\u003e Air ingress, contamination or empty lines can be reliably located at a glance.\u003c\/p\u003e\n\n\n\u003cp\u003e The picture above shows the usual PA hose and for comparison the one offered here.\u003c\/p\u003e\n\n\n\u003cp\u003e The hose is characterized by good temperature resistance of -40° C\/+90° C and chemical resistance to all types of fuels, including vegetable oil and RME.\u003c\/p\u003e\n\n\n\u003cp\u003e The hose is pulled onto the appropriate hose nipple while still warm. No hose clamps are used.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Complies with DIN 73378\u003c\/p\u003e\n\n\n\u003cp\u003e Material polyamide (PA)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 6 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter 8 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight: 22.7 g\/m\u003c\/p\u003e\n\n\n\u003cp\u003e smallest bending radius 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Operating pressure at room temperature max. 12 bar, burst pressure = x 0.33\u003c\/p\u003e\n\n\n \u003cp\u003ePlease note the pressure utilization factor; at higher temperatures the operating pressure decreases.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Maximum length in one piece: 50 m\u003c\/p\u003e\n\n\n\n\u003cp\u003e The price is per meter of hose.\u003c\/p\u003e\n\n\n\u003cp\u003e Minimum order quantity 1 meter\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812946739537,"sku":"PA-6-ID","price":3.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/PASchlauch_e0277615-7e62-4b13-8a5b-5dac23f04e1c.jpg?v=1757352543"},{"product_id":"st-25-sk-1-v4a","title":"Hose nozzle 25 mm, 1 inch thread, conical, stainless steel V4A","description":"\u003cp\u003e Hose nozzle 25 mm, 1 inch thread, conical, stainless steel V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Hose nozzle, R 1\" inch thread, conical, for 25 mm fuel line\u003c\/p\u003e\n\n\n\u003cp\u003e The thread is a BSPT tapered Whitworth pipe thread DIN 2999\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Total length 65.15 mm\u003c\/p\u003e\n\n\n\u003cp\u003e usable hose nozzle 36.48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Outer diameter of 24.8 - 25.78 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 35 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material V4A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread DIN 2999-1\u003c\/p\u003e\n\n\n \u003cp\u003emax. pressure 10 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 112 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947001681,"sku":"ST-25-SK-1-V4A","price":10.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-konisch-1Zoll-Edelstahl_9b2cf309-e6ca-45ff-8b62-ddaac502d7e6.jpg?v=1757352570"},{"product_id":"mva-11-4","title":"Sleeve 1 1\/4 inch stainless steel","description":"\u003cp\u003e Sleeve 1 1\/4 inch stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 48 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947067217,"sku":"MVA-11\/4","price":10.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_7a1ab8cb-c79d-4d27-90d8-942d00d3c6cf.jpg?v=1757352572"},{"product_id":"svuva-8","title":"Hose connector 180 degree bend 8 mm, stainless steel, petrol, oil, diesel, water, food","description":"\u003cp\u003e Hose connector 180 degree bend 8 mm, stainless steel, petrol, oil, diesel, water, food\u003c\/p\u003e\n\n\n\u003cp\u003e For connecting 2 hoses with 8 mm inner diameter.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Outer diameter of 8.26 - 8.86 mm (inside - outside serration)\u003c\/p\u003e\n\n\n\u003cp\u003e inner diameter 6.92 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Overall length 40 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Width U bend 40.26 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Material: stainless steel 1.4301 (X5CrNi18-10), AISI 304 (V2A)\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 15 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947099985,"sku":"SVUVA-8","price":5.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-180-Grad-Umkehrbogen_b964f61a-21dd-4d65-b7b5-f81d2b73249b.jpg?v=1757352574"},{"product_id":"zp-24-2-3-6-bl","title":"Gear pump 24 Volt, 1-6 bar, 2.3 l\/min, bypass, stainless steel pump head, PEEK gears","description":"\u003cp\u003eGear pump 24 Volt, 1-6 bar, 2.3 l\/min, bypass, stainless steel pump head, PEEK gears\u003c\/p\u003e\n\n\u003cp\u003eThis is a magnetically coupled self-priming gear pump with a brushless DC motor.\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for continuous operation with vegetable oil, for example as a pre-feed pump in trucks\/tractors\/CHP units.\u003c\/p\u003e\n\n\u003cp\u003eSpecial application as a pump for common rail engines.\u003c\/p\u003e\n\n\u003cp\u003eThe gear pump has a guaranteed service life of 20,000 operating hours, depending on the pressure operated.\u003c\/p\u003e\n\n\u003cp\u003eOptionally available, you will see the depicted pre-filter for use with vegetable oil.\u003c\/p\u003e\n\n\u003cp\u003eMaterials in contact with medium:\u003c\/p\u003e\n\n\u003cp\u003ePump head AISI316\u003c\/p\u003e\n\n\u003cp\u003eGears PEEK\u003c\/p\u003e\n\n\u003cp\u003eSeal PTFE\u003c\/p\u003e\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate 2.3 l\/min\u003c\/p\u003e\n\n\u003cp\u003eMax pressure 6 bar in continuous operation\u003c\/p\u003e\n\n\u003cp\u003eContinuously adjustable operating pressure by means of built-in overflow valve 1-6 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming up to 3 m height\u003c\/p\u003e\n\n\u003cp\u003eRated speed 3,400 rpm +\/- 10%\u003c\/p\u003e\n\n\u003cp\u003eThread 1\/8 inch NPT inlet\/outlet\u003c\/p\u003e\n\n\u003cp\u003eApproved media: oil, diesel, vegetable oil, water, chemicals compatible with the materials used\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature up to 120 ° C\u003c\/p\u003e\n\n\u003cp\u003eMax inlet pressure +\/- 0.5 bar\u003c\/p\u003e\n\n\u003cp\u003eVersion DC 24 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eRated current 1.97A +\/- 20%\u003c\/p\u003e\n\n\u003cp\u003eStarting current approx. 6.8A\u003c\/p\u003e\n\n\u003cp\u003eRated power 30W\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP40\u003c\/p\u003e\n\n\u003cp\u003eSpark suppressed\u003c\/p\u003e\n\n\u003cp\u003eCE\u003c\/p\u003e\n\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\n\u003cp\u003eTotal length 32 cm\u003c\/p\u003e\n\n\u003cp\u003eMotor diameter 42 mm\u003c\/p\u003e\n\n\u003cp\u003ePump head diameter 31.7 mm\u003c\/p\u003e\n\n\u003cp\u003eFlange diameter 60 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 973 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947132753,"sku":"ZP-24-2,3-6-Bl","price":1732.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zahnradpumpe-Gleichstrom_c56c909c-62d7-41c6-a6ce-6852bf3fea07.jpg?v=1757352586"},{"product_id":"frostschutz-tank-12-tragbar","title":"Transfer Pump Antifreeze, 12 Volt, max. 45 l\/min","description":"\u003cp\u003eAntifreeze transfer pump, 12 Volt, max. 45 l\/min\u003c\/p\u003e\n\n\u003cp\u003eThis positive displacement pump allows the transfer of antifreeze from barrels, canisters and tanks.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is equipped with a waterproof on\/off switch and a bypass valve.\u003c\/p\u003e\n\n\u003cp\u003eThe positive displacement pump is suitable for continuous operation and is self-priming.\u003c\/p\u003e\n\n\u003cp\u003eThe included hose connectors can be positioned variably in the pump according to the operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eTwo possible configurations are shown in the photos.\u003c\/p\u003e \n\n\u003cp\u003eYou achieve the highest throughput by mounting the two hose nozzles facing upwards.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 45 l\/min\u003c\/p\u003e \n\n\u003cp\u003ethe integrated bypass should not be used for more than 3 minutes, otherwise the motor will overheat\u003c\/p\u003e\n\n\u003cp\u003emax 1.2 bar\u003c\/p\u003e \n\n\u003cp\u003eSelf-priming over max. 1.50 m\u003c\/p\u003e\n\n\u003cp\u003eApproved media: Antifreeze\u003c\/p\u003e\n\n\u003cp\u003eHose connectors with 25 mm - 1 inch outer diameter\u003c\/p\u003e\n\n\u003cp\u003eVersion DC 12 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eStarting current 19 A, continuous current 8 A\u003c\/p\u003e\n\n\u003cp\u003e2.5 m power cable to the battery clamps with integrated 20 A fuse\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature - 10 ° C to max. + 60 ° C\u003c\/p\u003e\n\n\u003cp\u003eWeight 3.3 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947558737,"sku":"Frostschutz-Tank-12-tragbar","price":224.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Diesel-umfuellpumpe-tragbar_d4385218-109c-4c9b-9f6c-057ef822ebb1.jpg?v=1757352605"},{"product_id":"sk-80-230-va","title":"Side channel pump, 80 volts, stainless steel, 230 l\/min, self-priming, water, sea water, heating oil, diesel","description":"\u003cp\u003e Side channel pump, 80 volts, stainless steel, 230 l\/min, self-priming, water, sea water, heating oil, diesel\u003c\/p\u003e\n\n\n\u003cp\u003e Due to its operating principle, the side channel pump is protected against dry running for short periods.\u003c\/p\u003e\n\n\n\u003cp\u003e The side channel pump must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.\u003c\/p\u003e\n\n\n\u003cp\u003e If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.\u003c\/p\u003e\n\n\n\u003cp\u003e This also applies if a long horizontal distance has to be overcome.\u003c\/p\u003e\n\n\n\n \u003cp\u003eThis pump type offers further design advantages:\u003c\/p\u003e\n\n\n\u003cp\u003e the intake of air is possible without damage to the wings\u003c\/p\u003e\n\n\n\u003cp\u003e there is no contact between medium and motor\u003c\/p\u003e\n\n\n\u003cp\u003e low speed with high liter power\u003c\/p\u003e\n\n\n\n\u003cp\u003e This pump is suitable, for example, for transferring water, sea water, heating oil or diesel into various tanks.\u003c\/p\u003e\n\n\n\u003cp\u003e A particular area of ​​application is installation in commercial vehicles with electric drive.\u003c\/p\u003e\n\n\n\u003cp\u003e For example, for watering gardens in cemeteries.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Approved media:\u003c\/p\u003e\n\n\n\u003cp\u003e Water, sea water, wine, vegetable oil, diesel, heating oil\u003c\/p\u003e\n\n\n\u003cp\u003e The media to be pumped must not contain any abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003e In this case, the pump must be equipped with a suitable filter.\u003c\/p\u003e\n\n\n\u003cp\u003e The viscosity must not exceed 100 cSt.\u003c\/p\u003e\n\n\n\u003cp\u003e The media temperature must be below 70 ° C.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Version 80 Volt DC, nominal voltage\u003c\/p\u003e\n\n\n\u003cp\u003e Electrical connection terminal board, without cable and plug\u003c\/p\u003e\n\n\n\u003cp\u003e max. 230 l\/min flow rate (measured with water)\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure 3 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Self-priming max. 6 m height\u003c\/p\u003e\n\n\n \u003cp\u003ePump housing and impeller made of stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Motor shaft material: stainless steel AISI 316\u003c\/p\u003e\n\n\n\u003cp\u003e Mechanical seal CER\/GRA\/NBR\u003c\/p\u003e\n\n\n\u003cp\u003e Hose connection 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e 1400 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e There is a shipping charge of €50 for the freight forwarding company.\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947591505,"sku":"SK-80-230-VA","price":4874.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Seitenkanalpumpe-400-V-230-Liter_989e705c-7eca-4d44-a4fe-da56238edd8e.jpg?v=1757352608"},{"product_id":"mva-1-4","title":"1\/4 inch stainless steel sleeve","description":"\u003cp\u003e 1\/4 inch stainless steel sleeve\u003c\/p\u003e\n\n\n\u003cp\u003e Material V2A\u003c\/p\u003e\n\n\n\u003cp\u003e Thread version DIN2999-1\u003c\/p\u003e\n\n\n\u003cp\u003e Length 25mm\u003c\/p\u003e\n\n\n\u003cp\u003e Diameter 18.75mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 31g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947657041,"sku":"MVA-1\/4","price":2.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Muffe-3-4-Zoll-Edelstahl_e20c2534-cbdb-4b12-8388-41168dccdf41.jpg?v=1757352609"},{"product_id":"st-4-5x0-8-m-mv","title":"Hose nozzle 4 mm M 5x0.8 thread, metric, nickel-plated brass","description":"\u003cp\u003e Hose nozzle 4 mm M 5x0.8 thread, metric, nickel-plated brass\u003c\/p\u003e\n\n\n\u003cp\u003e 4 mm hose nozzle with metric M 5x0.8 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 5x0.8\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 2.1 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947886417,"sku":"ST-4-5x0,8-M-MV","price":2.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_75b7ad19-24c1-4f60-ab30-9da7cf234a66.jpg?v=1757352619"},{"product_id":"adblue-pulser","title":"Pulser, 1 inch male thread on both sides, max. 10 bar, max. 28 V AC\/DC 100 mAmp (87.73 pulse\/l)","description":"\u003cp\u003e Pulser, 1 inch male thread on both sides, max. 10 bar, max. 28 V AC\/DC 100 mAmp (87.73 pulse\/l)\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947951953,"sku":"AdBlue-Pulser","price":116.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/AdBlue-Pulser-Edelstahl.jpg?v=1757352621"},{"product_id":"st-2-3x0-5-m-va","title":"Hose nozzle 2 mm M 3x0.5 thread, metric, stainless steel 1.4571","description":"\u003cp\u003e Hose nozzle 2 mm M 3x0.5 thread, metric, stainless steel 1.4571\u003c\/p\u003e\n\n\n\u003cp\u003e 2 mm hose nozzle with metric M 3x0.5 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 3x0.5\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 4.5 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 0.7 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812947984721,"sku":"ST-2-3x0,5-M-VA","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_7905e591-ad92-4c44-be2a-e51fd2a15634.jpg?v=1757352623"},{"product_id":"st-3-3x0-5-m","title":"Hose nozzle 3 mm M 3x0.5 thread, metric, brass","description":"\u003cp\u003e Hose nozzle 3 mm M 3x0.5 thread, metric, brass\u003c\/p\u003e\n\n\n\u003cp\u003e 3 mm hose nozzle with metric M 3x0.5 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 3x0.5\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 4.5 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 0.7 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948017489,"sku":"ST-3-3x0,5-M","price":2.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_e17b6b82-851d-427b-a11b-f8d7f772f6b8.jpg?v=1757352625"},{"product_id":"st-2-5x0-8-m","title":"Hose nozzle 2 mm M 5x0.8 thread, metric, brass","description":"\u003cp\u003e Hose nozzle 2 mm M 5x0.8 thread, metric, brass\u003c\/p\u003e\n\n\n\u003cp\u003e 2 mm hose nozzle with metric M 5x0.8 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 5x0.8\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 1.7 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948083025,"sku":"ST-2-5x0,8-M","price":2.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_047e32c9-22d9-46e3-985c-d40cf5ea305b.jpg?v=1757352627"},{"product_id":"st-4-5x0-8-m-va","title":"Hose nozzle 4 mm M 5x0.8 thread, metric, stainless steel 1.4571","description":"\u003cp\u003e Hose nozzle 4 mm M 5x0.8 thread, metric, stainless steel 1.4571\u003c\/p\u003e\n\n\n\u003cp\u003e 4 mm hose nozzle with metric M 5x0.8 thread\u003c\/p\u003e\n\n\n\u003cp\u003e We recommend using our hydraulic adhesive to install the grommets.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Metric thread M 5x0.8\u003c\/p\u003e\n\n\n\u003cp\u003e Wrench size 7 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 2.6 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948115793,"sku":"ST-4-5x0,8-M-VA","price":12.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchtuelle-metrisch-M5_3b1bf4dd-7fec-41ef-9150-a774fb70547a.jpg?v=1757352629"},{"product_id":"fp-230-epdm-fda-115-l-min","title":"Impeller Pump 230 Volt, max. 115 l\/min, max. 3 bar, Bee Feed Syrup","description":"Impeller pump 230 Volt, max. 115 l\/min, max. 3 bar, bee feed syrup\n\nThis bee feed pump has been extensively tested by us in \u003ca href=\"http:\/\/www.pumpen-peters.de\/blog\/post\/Bienen-Futter-Sirup-Pumpe-mit-230-Volt-Antrieb-f%C3%BCr-den-Imker\/56\/\"\u003epractice\u003c\/a\u003e.\n\nWe used the highly viscous syrup from API Alsace Ickowicz from France as feed syrup.\n\nThis is the thickest syrup for bee feeding known to us.\n\nOur syrup pump therefore also pumps bee feed, such as:\nBioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettler's feed syrup, Ambrosia, Api Gold, Api Royal Syrup, Butiforce, Apikel, Fructoplus, Apistar.\n\nSince the feedstuffs have different viscosities at different temperatures, here are some data as an example.\n\nTest basis:\n\nThe suction hose with 50 mm inner diameter is connected directly to the feed syrup IBC via a 2-inch hose nozzle.\n\nThe pressure line has an inner diameter of 38 mm and is equipped with a ball valve with an outlet nozzle at the end.\n\nThe test results with different hose lengths at a syrup temperature of 20 ° C and a suction hose of 1 m length and 50 mm inner diameter:\n\n5 m hose length 75 l\/min\n\n10 m hose length 49 l\/min\n\n20 m hose length 29 l\/min\n\n25 m hose length 21 l\/min\n\nAll components used in the test, such as hoses, hose nozzles and ball valves, can be found in our shop.\n\nWe would be happy to put together your personal set.\n\nTechnical data:\n\nMotor 1.8 kw, 230 Volt, 11 A, direction reversal\n\nStarting current approx. 16 -18 A, with direction reversal approx. 20 A\n\nSpeed 850 rpm\n\nFlow rate max. 115 l\/min calculated on water\n\nmax 3 bar\n\nImpeller EPDM with FDA approval, dry running max. 1 minute\n\nMechanical seal Gra\/Cer\/EPDM\n\nPump casing stainless steel\n\nThread on both sides 1 1\/2 inch external thread\n\nmax. 90 °C medium temperature\n\nProtection class IP 55\n\nDimensions: 338 x 180 x 215 mm\n\nWeight 35 kg\n\nThe pump will be shipped by freight forwarder, the cost is 72 € including VAT.","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948214097,"sku":"FP-230-EPDM-FDA-115 l\/min","price":2588.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Futtersirup-Bienen-Pumpe_a4ffe023-22c2-4198-9b1e-76d5833ffc8f.jpg?v=1757352635"},{"product_id":"svgsl-53","title":"Hose connector 53 mm, metal, galvanized steel, water, oil, diesel, heating oil, petrol","description":"\u003cp\u003e Hose connector 53 mm, metal, galvanized steel, water, oil, diesel, heating oil, petrol\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 22 cm\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Weight 942 g\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948246865,"sku":"SVGSL-53","price":21.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Schlauchverbinder-Stahl_7c15ab85-6eb5-47eb-a3dc-d1b1b8f2dac6.jpg?v=1757352637"},{"product_id":"fp-400-perbunan-90l-min","title":"Impeller pump 400 Volt, 90 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 400 Volt, 90 l\/min, 5 bar, Perbunan Impeller, water, heat transfer fluids, vegetable oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents, and heat transfer fluids in solar systems.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for pumping media with abrasive constituents is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nService water, heating oil, diesel, oil, detergents, solar system heat transfer fluids, antifreeze\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948410705,"sku":"FP-400-Perbunan-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_a00cbde1-9b88-4a5b-82ca-9aa015ca17ff.jpg?v=1757352648"},{"product_id":"fpa-230-72l-min-fass","title":"Diesel Barrel Pump 230 Volt, max. 72 l\/min, Set","description":"\u003cp\u003eDiesel Barrel Pump 230 Volt, max. 72 l\/min, Set\u003c\/p\u003e\n\n\u003cp\u003eThe electric diesel pump with bypass is used for easy refueling of vehicles and construction machinery.\u003c\/p\u003e\n\n\u003cp\u003eThis barrel pump transfers diesel and heating oil from barrels, tanks and containers.\u003c\/p\u003e\n\n\u003cp\u003eOptionally, this set can be expanded with a digital (see photo) or manual counter.\u003c\/p\u003e\n\n\u003cp\u003eOf course, a longer dispensing hose is also possible.\u003c\/p\u003e\n\n\u003cp\u003eJust ask us.\u003c\/p\u003e\n\n\n\u003cp\u003eThe set includes everything you need for immediate operation of the diesel barrel pump:\u003c\/p\u003e\n\n\u003cp\u003eBarrel adapter for 200 l barrel\u003c\/p\u003e\n\n\u003cp\u003eDispensing hose 4 m\u003c\/p\u003e\n\n\u003cp\u003eSuction hose 2 m\u003c\/p\u003e\n\n\u003cp\u003eSuction bottom filter\u003c\/p\u003e\n\n\u003cp\u003eLifting protection according to WHG\u003c\/p\u003e\n\n\u003cp\u003eAutomatic nozzle\u003c\/p\u003e\n\n\u003cp\u003eNozzle holder without limit switch\u003c\/p\u003e\n\n\u003cp\u003eConnection cable with Schuko plug 1.80 m\u003c\/p\u003e\n\n\u003cp\u003eAmbient temperature -20 ºC - + 60 ºC relative humidity max 90%\u003c\/p\u003e\n\n\u003cp\u003eThe pump is suitable for continuous operation\u003c\/p\u003e\n\n\u003cp\u003eDry running of the pump must be avoided\u003c\/p\u003e\n\n\u003cp\u003eNoise level 70 dba\u003c\/p\u003e \n\n\n\u003cp\u003eDry running of the pump must be avoided.\u003c\/p\u003e \n\n\u003cp\u003eNoise level 70 dba\u003c\/p\u003e \n\n\n\u003cp\u003emax. suction height 2 m\u003c\/p\u003e\n\n\u003cp\u003emax. dispensing hose length 6 m\u003c\/p\u003e\n\n\u003cp\u003eBarrel thread M64x4 and G2\u003c\/p\u003e\n\n\u003cp\u003eMotor 230 Volt 550 Watt and max 3.3 A\u003c\/p\u003e\n\n\u003cp\u003e100 µ filter built-in\u003c\/p\u003e\n\n\u003cp\u003eWeight 7.9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948509009,"sku":"FPA-230-72l\/min-Fass","price":242.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Diesel-Fasspumpe_aa01dd82-61a1-4141-948c-d6496c28d7f4.jpg?v=1757352658"},{"product_id":"fp-400-perbunan-60l-min","title":"Impeller pump 400 Volt, 60 l\/min, 5 bar, Perbunan impeller, water, heat transfer fluids, vegetable oils","description":"\u003cp\u003eImpeller Pump 400 Volt, 60 l\/min, 5 bar, Perbunan Impeller, Water, Heat Transfer Fluid, Vegetable Oils\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, detergents and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media can be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 5 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Perbunan\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded fittings 1 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eThe Perbunan impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eService water, seawater, vegetable oils, detergents, solar system heat transfer fluids, antifreeze agents\u003c\/p\u003e \n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C medium temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948574545,"sku":"FP-400-Perbunan-60l\/min","price":558.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_aba47381-08fe-499b-bf52-8b2073cbc922.jpg?v=1757352666"},{"product_id":"fp-230-kunststoff-90l-min","title":"Impeller Pump 230 Volt, 90 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil","description":"\u003cp\u003eImpeller Pump 230 Volt, 90 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be pumped as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth; otherwise, up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e\n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e\n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e\n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 1\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e\n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be pumped with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e\n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e\n\n\u003cp\u003eAC version 230 Volt nominal voltage\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 U\/min\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948607313,"sku":"FP-230-Kunststoff-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_890052a4-1a5d-45ab-a141-d504555f1e29.jpg?v=1757352672"},{"product_id":"zp-l-starr-ersatzteil","title":"Spare part rigid spout for grease gun","description":"Grease gun rigid spout\u003cbr\u003e\u003cbr\u003eWith anatomical handle and lever protection against unintentional operation. In addition, the integrated push button enables a trigger lock when dispensing oil.\u003cbr\u003e\u003cbr\u003eEquipped with a rigid spout with automatic anti-drip valve.\u003cbr\u003e\u003cbr\u003eMax. 30 l\/min\u003cbr\u003e\u003cbr\u003eThis gun is particularly suitable for dispensing all types of oils using the gear pump ZP-230-12l\/min.\u003cbr\u003e\u003cbr\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948640081,"sku":"ZP-Öl-starr-Ersatzteil","price":29.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Oel-Abgabepistole-starrer-Auslauf-Ersatzteil_7354915e-8d43-4792-aa8a-c33184e77083.jpg?v=1757352675"},{"product_id":"hk-pumpen-zerlegbar","title":"Handcart, transport cart for pumps for easy transport, dismantable","description":"\u003cp\u003e Handcart, transport cart for pumps for easy transport, dismantable\u003c\/p\u003e\n\n\n\u003cp\u003e The pump is mounted on the base plate using four screws.\u003c\/p\u003e\n\n\n\u003cp\u003e The hose material used can be stored over the pump.\u003c\/p\u003e\n\n\n\u003cp\u003e The connecting cable can be neatly attached to the welded tabs on the trolley.\u003c\/p\u003e\n\n\n\u003cp\u003e This means the pump unit can be quickly moved to the site.\u003c\/p\u003e\n\n\n \u003cp\u003eThe handle of the cart can be unscrewed, allowing for a small transport space in the service vehicle.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Dimensions:\u003c\/p\u003e\n\n\n\u003cp\u003e Max usable space between wheel and wheel: 240 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Base plate 320 x 240 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Height handle to floor 545 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Total length 728 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Width of outer edge of wheels 370 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Plastic wheels\u003c\/p\u003e\n\n\n\u003cp\u003e Material steel\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 4.1 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948705617,"sku":"HK-Pumpen-zerlegbar","price":88.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zerlegbare-Transportkarre-Pumpen-1.jpg?v=1757352677"},{"product_id":"fp-400-viton-90l-min","title":"Impeller Pump 400 Volt, 90 l\/min, 3 bar, Viton Impeller, Oil. Diesel, Wood Preservatives","description":"\u003cp\u003eImpeller pump 400 Volt, 90 l\/min, 3 bar, Viton impeller, oil. Diesel, wood preservatives\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, heating oil, oils, cleaning agents, and solar system heat transfer fluids.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed, as long as they fit between the impeller vanes and are not abrasive. A version for pumping media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry running time for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 3 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller Viton\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003eThreaded nozzles 1 1\/4 inch internal thread\u003c\/p\u003e\n\n\u003cp\u003eApproved media: \u003cbr\u003e\nOil, diesel, heating oil, palm oil, soybean oil, oil-based wood preservatives\u003c\/p\u003e\n\n\u003cp\u003emax. 90 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e \n\n\u003cp\u003eDimensions 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948738385,"sku":"FP-400-Viton-90l\/min","price":920.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe_0d5669f5-f77f-43cb-9bad-dd63d3090d44.jpg?v=1757352685"},{"product_id":"fp-400-kunststoff-90l-min","title":"Impeller Pump 400 Volt, 90 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller Pump 400 Volt, 90 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for conveying water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 90 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax. 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 1\/4 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed with the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 1.1 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt rated voltage\u003c\/p\u003e \n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eSpeed max. 2800 rpm\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 13 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948771153,"sku":"FP-400-Kunststoff-90l\/min","price":844.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Perbunan-1_e1fa8663-1d75-4c32-98df-3ee3366bde28.jpg?v=1757352690"},{"product_id":"fp-400-kunststoff-60l-min","title":"Impeller Pump 400 Volt, 60 l\/min, 4 bar, Plastic Impeller, Diesel, Heating Oil, Mineral Oil","description":"\u003cp\u003eImpeller pump 400 Volt, 60 l\/min, 4 bar, plastic impeller, diesel, heating oil, mineral oil\u003c\/p\u003e\n\n\u003cp\u003eThis pump is suitable for pumping water, mineral and vegetable oils, diesel, heat transfer fluid, and antifreeze.\u003c\/p\u003e\n\n\u003cp\u003eSolids in the media may be conveyed as long as they fit between the impeller blades and are not abrasive. A version for conveying media with abrasive components is available upon request.\u003c\/p\u003e\n\n\u003cp\u003eThe pump is dry self-priming up to 3 m depth, otherwise up to 7 m.\u003c\/p\u003e\n\n\u003cp\u003eThe dry run duration for this pump type is a maximum of 1 minute.\u003c\/p\u003e\n\n\n\u003cp\u003eTechnical data:\u003c\/p\u003e \n\n\u003cp\u003eFlow rate max 60 l\/min\u003c\/p\u003e \n\n\u003cp\u003emax 4 bar\u003c\/p\u003e\n\n\u003cp\u003eSelf-priming max 7 m height\u003c\/p\u003e \n\n\u003cp\u003eImpeller plastic\u003c\/p\u003e \n\n\u003cp\u003ePump housing Aluminum Al Mg Si 1\u003c\/p\u003e\n\n\u003cp\u003ePump shaft Stainless steel 1.4104\u003c\/p\u003e\n\n\u003cp\u003e1 inch external thread\u003c\/p\u003e\n\n\u003cp\u003eThe plastic impeller is suitable for the following media:\u003c\/p\u003e \n\n\u003cp\u003eWater, mineral and vegetable oils, diesel, heat transfer fluid, antifreeze\u003c\/p\u003e\n\n\u003cp\u003eSmall solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.\u003c\/p\u003e\n\n\u003cp\u003emax. 60 °C media temperature\u003c\/p\u003e \n\n\u003cp\u003eMotor 0.55 kW\u003c\/p\u003e \n\n\u003cp\u003eThree-phase version 400 Volt nominal voltage\u003c\/p\u003e \n\n\u003cp\u003eSpeed 2800 rpm or optionally 1400 rpm\u003c\/p\u003e\n\n\u003cp\u003eProtection class IP 55\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 290 x 170 x 230 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight 9.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812948836689,"sku":"FP-400-Kunststoff-60l\/min","price":532.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impeller-Pumpe_1bf4c5e7-6640-486c-a8b6-ab50a0e98434.jpg?v=1757352694"},{"product_id":"zp-40-adblue-ag-1","title":"AdBlue nozzle, up to 40 l\/min, automatic shut-off, swivel joint, 1 inch AG","description":"\u003cp\u003e AdBlue nozzle, up to 40 l\/min, automatic shut-off, swivel joint, 1 inch AG\u003c\/p\u003e\n\n\n\u003cp\u003e This special fuel pump is designed for pumping AdBlue.\u003c\/p\u003e\n\n\n\u003cp\u003e The fuel nozzle is made of stainless steel and has Viton O-rings.\u003c\/p\u003e\n\n\n\u003cp\u003e The ergonomics of this fuel nozzle are excellent.\u003c\/p\u003e\n\n\n\n\u003cp\u003e max. 40 l\/min\u003c\/p\u003e\n\n\n\u003cp\u003e Medium AdBlue\u003c\/p\u003e\n\n\n\u003cp\u003e lockable in two stages\u003c\/p\u003e\n\n\n\u003cp\u003e Spout diameter 16 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Swivel joint with Viton seal and 1 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e automatic shutdown\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 2.2 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812950770001,"sku":"ZP-40-AdBlue-AG-1","price":322.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Zapfpistole-AdBlue_19e94f3a-98ff-4acd-a33a-10d82e5d5ffd.jpg?v=1757352715"},{"product_id":"sk-24-25-1","title":"Side channel pump, 24 volts, max. 25 l\/min, max. 1 bar, bronze, water, sea water, diesel","description":"\u003cp\u003e Side channel pump, 24 volts, max. 25 l\/min, max. 1 bar, bronze, water, sea water, diesel\u003c\/p\u003e\n\n\n\u003cp\u003e Due to its operating principle, the side channel pump is protected against dry running for short periods.\u003c\/p\u003e\n\n\n\u003cp\u003e The side channel pump must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.\u003c\/p\u003e\n\n\n \u003cp\u003eIf the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.\u003c\/p\u003e\n\n\n\u003cp\u003e This also applies if a long horizontal distance has to be overcome.\u003c\/p\u003e\n\n\n\n\u003cp\u003e This pump type offers further design advantages:\u003c\/p\u003e\n\n\n\u003cp\u003e the intake of air is possible without damage to the wings\u003c\/p\u003e\n\n\n\u003cp\u003e there is no contact between medium and motor\u003c\/p\u003e\n\n\n\u003cp\u003e low speed with high liter power\u003c\/p\u003e\n\n\n\u003cp\u003e This side channel centrifugal pump is suitable for transferring water, sea water, heating oil or diesel into various tanks.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Approved media:\u003c\/p\u003e\n\n\n\u003cp\u003e Water, sea water, vegetable oil, diesel, heating oil\u003c\/p\u003e\n\n\n\u003cp\u003e The media to be pumped must not contain any abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003e In this case, the pump must be equipped with a suitable filter.\u003c\/p\u003e\n\n\n\u003cp\u003e The viscosity must not exceed 100 cSt.\u003c\/p\u003e\n\n\n\u003cp\u003e The media temperature must be below 70 ° C.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Version 24 Volt DC, nominal voltage, suitable for continuous operation\u003c\/p\u003e\n\n\n \u003cp\u003eRated power 0.33 KW, rated current 14 A\u003c\/p\u003e\n\n\n\u003cp\u003e Electrical connection terminal board, without cable and plug\u003c\/p\u003e\n\n\n\u003cp\u003e max. 25 l\/min flow rate (measured with water)\u003c\/p\u003e\n\n\n\u003cp\u003e 2000 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure 1 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Self-priming, filled max. 7 m height\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing and impeller made of bronze\u003c\/p\u003e\n\n\n\u003cp\u003e Motor shaft material: stainless steel AISI 316\u003c\/p\u003e\n\n\n\u003cp\u003e Perbunan shaft seal\u003c\/p\u003e\n\n\n\u003cp\u003e Hose connection 3\/4 inch external thread\u003c\/p\u003e\n\n\n\n\u003cp\u003e 5.7 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812951228753,"sku":"SK-24-25-1","price":414.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Seitenkanalpumpe-400-V-230-Liter_216e1d8a-e65a-4707-8beb-eec724d77ecc.jpg?v=1757352717"},{"product_id":"fp-400-perbunan-115l-min","title":"Impeller pump 400 Volt, max 115 l\/min, 3 bar, Perbunan impeller, bee feed, syrup","description":"\u003cp\u003e Impeller pump 400 Volt, max 115 l\/min, 3 bar, Perbunan impeller, bee feed, syrup\u003c\/p\u003e\n\n\n\u003cp\u003e We have thoroughly tested this bee feed pump in practice.\u003c\/p\u003e\n\n\n\u003cp\u003e We used the highly viscous syrup from API Alsace Ickowicz in France as feed syrup.\u003c\/p\u003e\n\n\n \u003cp\u003eThis is the thickest syrup for feeding bees known to us.\u003c\/p\u003e\n\n\n\u003cp\u003e Our syrup pump therefore also pumps bee feed, such as:\u003cbr\u003e\n Bioagenabon, FORTUNE API HF 1575, Apiinvert, Api food 75-15, Hostettlers feed syrup, Ambrosia, Api Gold, Api Royal syrup, Butiforce, Apikel, Fructoplus, Apistar.\u003c\/p\u003e\n\n\n\u003cp\u003e We would be happy to put together your personal set with hoses, ball valves, etc.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Rated voltage (AC) 400 V, rated frequency 50 Hz, reversible\u003c\/p\u003e\n\n\n\u003cp\u003e Rated power 1.5 kW, rated current (AC) 4.1 A\u003c\/p\u003e\n\n\n\u003cp\u003e Switch L\/R, 4 cables without plug\u003c\/p\u003e\n\n\n\u003cp\u003e Speed ​​900 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Flow rate max. 115 l\/min calculated on water\u003c\/p\u003e\n\n\n\u003cp\u003e max 3 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Impeller Perbunan, dry running max. 1 minute\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing stainless steel\u003c\/p\u003e\n\n\n\u003cp\u003e Threaded nozzles 1 1\/2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e max. 90 °C media temperature\u003c\/p\u003e\n\n\n\u003cp\u003e Protection class IP 55\u003c\/p\u003e\n\n\n\u003cp\u003e Dimensions: 338 x 215 x 159 mm\u003c\/p\u003e\n\n\n\u003cp\u003e Weight 20 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812951294289,"sku":"FP-400-Perbunan-115l\/min","price":1160.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Impellerpumpe-Lebensmittel-400-Volt.jpg?v=1757352719"},{"product_id":"sk-80-230","title":"Side channel pump, 80 volts, bronze, 230 l\/min, self-priming, water, sea water, heating oil, diesel","description":"\u003cp\u003e Side channel pump, 80 volts, bronze, 230 l\/min, self-priming, water, sea water, heating oil, diesel\u003c\/p\u003e\n\n\n\u003cp\u003e Due to its operating principle, the side channel pump is protected against dry running for short periods.\u003c\/p\u003e\n\n\n\u003cp\u003e The side channel pump must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.\u003c\/p\u003e\n\n\n\u003cp\u003e If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.\u003c\/p\u003e\n\n\n\u003cp\u003e This also applies if a long horizontal distance has to be overcome.\u003c\/p\u003e\n\n\n\n\u003cp\u003e This pump type offers further design advantages:\u003c\/p\u003e\n\n\n\u003cp\u003e the intake of air is possible without damage to the wings\u003c\/p\u003e\n\n\n \u003cp\u003ethere is no contact between medium and motor\u003c\/p\u003e\n\n\n\u003cp\u003e low speed with high liter power\u003c\/p\u003e\n\n\n\n\u003cp\u003e This pump is suitable, for example, for transferring water, sea water, heating oil or diesel into various tanks.\u003c\/p\u003e\n\n\n\u003cp\u003e A particular area of ​​application is installation in commercial vehicles with electric drive.\u003c\/p\u003e\n\n\n\u003cp\u003e For example, for watering gardens in cemeteries.\u003c\/p\u003e\n\n\n\n\u003cp\u003e Approved media:\u003c\/p\u003e\n\n\n\u003cp\u003e Water, sea water, wine, vegetable oil, diesel, heating oil\u003c\/p\u003e\n\n\n\u003cp\u003e The media to be pumped must not contain any abrasive substances.\u003c\/p\u003e\n\n\n\u003cp\u003e In this case, the pump must be equipped with a suitable filter.\u003c\/p\u003e\n\n\n\u003cp\u003e The viscosity must not exceed 100 cSt.\u003c\/p\u003e\n\n\n\u003cp\u003e The media temperature must be below 70 ° C.\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Technical data:\u003c\/p\u003e\n\n\n\u003cp\u003e Version 80 Volt DC, nominal voltage\u003c\/p\u003e\n\n\n\u003cp\u003e Electrical connection terminal board, without cable and plug\u003c\/p\u003e\n\n\n\u003cp\u003e max. 230 l\/min flow rate (measured with water)\u003c\/p\u003e\n\n\n\u003cp\u003e max. pressure 3 bar\u003c\/p\u003e\n\n\n\u003cp\u003e Self-priming max. 6 m height\u003c\/p\u003e\n\n\n\u003cp\u003e Pump housing and impeller made of bronze\u003c\/p\u003e\n\n\n\u003cp\u003e Motor shaft material: stainless steel AISI 316\u003c\/p\u003e\n\n\n\u003cp\u003e Mechanical seal CER\/GRA\/NBR\u003c\/p\u003e\n\n\n \u003cp\u003eHose connection 2 inch external thread\u003c\/p\u003e\n\n\n\u003cp\u003e 1400 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e There is a shipping charge of €50 for the freight forwarding company.\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812953719121,"sku":"SK-80-230","price":3790.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Seitenkanalpumpe-400-V-230-Liter_66587837-d06c-472b-9cde-83031585f52b.jpg?v=1757352735"},{"product_id":"kurbel-benzin-auslauf","title":"Hand pump for gasoline, kerosene, diesel, heating oil, petroleum, Aspen fuel, alkylate gasoline","description":"\u003cp\u003eHand drum pump for petrol, kerosene, diesel, heating oil, petroleum, Aspen, alkylate petrol\u003c\/p\u003e\n\n\u003cp\u003eThis pump can be used to transfer petrol.\u003c\/p\u003e\n\n\u003cp\u003eThe suction tube is suitable for 50-200 litre drums.\u003c\/p\u003e\n\n\u003cp\u003eThe included drum adapter fits into the openings of 200 litre metal drums.\u003c\/p\u003e\n\n\u003cp\u003eThe product comes with a 2.4m anti-static hose with a metal spout.\u003c\/p\u003e\n\n\n\u003cp\u003eWe recommend purchasing the anti-static set shown as an accessory.\u003c\/p\u003e \n\n\n\u003cp\u003eOutput: 350 ml\/per revolution (approx. 32 l\/min)\u003c\/p\u003e\n\n\n\u003cp\u003eApproved media: petrol, diesel fuel, heptane, kerosene, Stoddard solvent, light oils, special petrol, Aspen,\u003c\/p\u003e\n\n\u003cp\u003eNot suitable for media: water, sulfuric acid, naphtha, methanol,\u003cbr\u003e\nMEK, acetone, ammonia, benzene, bleach, chlorine\u003c\/p\u003e\n\n\n\u003cp\u003eDetails:\u003c\/p\u003e\n\n\u003cp\u003eCarbon vanes\u003c\/p\u003e \n\n\u003cp\u003eCast iron rotor\u003c\/p\u003e\n\n\u003cp\u003eStainless steel filter\u003c\/p\u003e \n\n\u003cp\u003eCheck valve\u003c\/p\u003e \n\n\u003cp\u003e960 mm telescopic metal suction tube\u003c\/p\u003e\n\n\u003cp\u003e2\" drum adapter\u003c\/p\u003e\n\n\u003cp\u003eCurved metal spout\u003c\/p\u003e\n\n\u003cp\u003eCE and UL certified\u003c\/p\u003e\n\n\u003cp\u003eWeight 8 kg\u003c\/p\u003e","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812953948497,"sku":"Kurbel-Benzin-Auslauf","price":363.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Handkurbel-Pumpe-Benzin-Alkylatbenzin_76bccc38-40f8-4a49-8117-8f1afe7c9c7f.jpg?v=1757352738"},{"product_id":"zp-l-dis-pro-vorwahl-k-hlschmiermittel","title":"Automatic dispensing nozzle, cooling lubricant, liter preset program, digital, not verifiable","description":"Automatic dispensing gun with programmable liter preselection, for filling oil with digital counter, not verifiable by calibration\u003cbr\u003e\u003cbr\u003eThe amount of oil to be dispensed can be easily preset on the integrated digital counter. The gun then automatically stops dispensing after the preset oil volume has flowed through.\u003cbr\u003e\u003cbr\u003eA special feature is the automatic program for 5 freely selectable liter volumes. For example, you fill 5\/10\/50\/80\/200 l containers in your workshop. You program these values once and can then recall them at the touch of a button. The cumbersome re-entry of liter volumes or reading and pressing the gun is eliminated. This saves time and is environmentally friendly.\u003cbr\u003e\u003cbr\u003eThis dispensing nozzle can, of course, also be operated manually without presetting.\u003cbr\u003e\u003cbr\u003eAn ergonomic handle and lever guard against unintentional operation, and a built-in filter are the practical features required of this oil gun. In addition, the integrated push button allows for a trigger lock during oil dispensing.\u003cbr\u003e\u003cbr\u003eEquipped with a rigid spout and an automatic anti-drip valve, which is adjustable at an angle of 75 degrees.\u003cbr\u003e\u003cbr\u003eThis gun is particularly suitable for dispensing all types of oils using a gear pump. We would be happy to advise you on which model suits your application.\u003cbr\u003e\u003cbr\u003e\nTechnical data:\n\u003cbr\u003e\u003cbr\u003eLCD display 5-digit\u003cbr\u003e\u003cbr\u003eFlow rate 1–30 l\/min\u003cbr\u003e\u003cbr\u003eInternal thread 1\/2 inch\u003cbr\u003e\u003cbr\u003emax pressure PN 65 bar\u003cbr\u003e\u003cbr\u003eOperating temperature -20 °C \/ +40 °C\u003cbr\u003e\u003cbr\u003eAccuracy ±0.5 %\u003cbr\u003e\u003cbr\u003enot verifiable by calibration ","brand":"Pumpen-Peters und Zubehör","offers":[{"title":"Default Title","offer_id":51812954767697,"sku":"ZP-Öl-Dis-Pro-Vorwahl-Kühlschmiermittel","price":996.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8892\/5265\/files\/Automatik-Zapfpistole-Oel-Litervorwahl-Display_5b9b183d-673b-42b4-adf6-06396ac86248.jpg?v=1757352754"}],"url":"https:\/\/www.pumpen-peters.de\/en\/collections\/pumpen-peters-und-zubehor.oembed?page=16","provider":"Pumpen-Peters und Zubehör","version":"1.0","type":"link"}