Transfer Pump Antifreeze, 12 Volt, max. 45 l/min

Antifreeze transfer pump, 12 Volt, max. 45 l/min

This positive displacement pump allows the transfer of antifreeze from barrels, canisters and tanks.

The pump is equipped with a waterproof on/off switch and a bypass valve.

The positive displacement pump is suitable for continuous operation and is self-priming.

The included hose connectors can be positioned variably in the pump according to the operating conditions.

Two possible configurations are shown in the photos.

You achieve the highest throughput by mounting the two hose nozzles facing upwards.

Technical data:

Flow rate max 45 l/min

the integrated bypass should not be used for more than 3 minutes, otherwise the motor will overheat

max 1.2 bar

Self-priming over max. 1.50 m

Approved media: Antifreeze

Hose connectors with 25 mm - 1 inch outer diameter

Version DC 12 Volt nominal voltage

Starting current 19 A, continuous current 8 A

2.5 m power cable to the battery clamps with integrated 20 A fuse

Operating temperature - 10 ° C to max. + 60 ° C

Weight 3.3 kg