Drill Pump Bronze, self-priming, max. 23 l/min, 13 mm Hose Nozzles, Diesel, Heating Oil, Water

Drill pump bronze, self-priming, max. 23 l/min, 13 mm nozzles, diesel, heating oil, water

Due to its design, the drill pump is dry-run safe and also offers the possibility of reversing the direction of rotation.
This means it can pump in and out without changing the hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped, then it is continuously self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil to various tanks.

Further applications include operation with diesel, or the transfer of lubricating oils, soaps and water.

Naturally, diesel or heating oil tanks can be emptied with the pump.

The drill pump is also used for emptying or filling a waterbed.

Using a cordless drill and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water and bronze compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents, etc., i.e. all operating fluids that require EX equipment.

Operating fluids that are viscous such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft for the drill or cordless drill 9 mm

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Flow rate (measured with water) max. 23 l/min

Self-priming max. 6 m height

Discharge head max. 24 m (where the output then approaches zero)

Thread 3/4 inch male thread with 13 mm hose nozzles for 1/2 inch water hose/garden hose

Pump housing and impeller made of bronze, stainless steel shaft

2 mounting feet

Weight 0.9 kg