Gear pump 12 Volt, 1-5 bar, 0.8 l/min, bypass, small version

Gear pump 12 Volt, 1-5 bar, 0.8 l/min, bypass, small design

This pump is suitable for continuous operation with vegetable oil, for example as a pre-feed pump in trucks/tractors/CHP units. Special use as a gear pump for common rail and PD engines.

The gear pump has a guaranteed service life of 8,000 - 10,000 operating hours, depending on the pressure operated.

An additional return outlet of the pump is to be connected to the return line to the tank. This enables trouble-free operation.

A pre-filter is mandatory to maintain the warranty. You can find these filters under the "Filters" category. For example, the shown filter, which can be operated by means of banjo bolts. Instead of banjo bolts and ring eyelets, straight fittings with 14x1.5 thread can also be used.

The adapter shown has a 1/8 to 14x1.5 thread. This allows ring eyelets and banjo bolts to be attached to the pump outlets. Likewise, straight fittings with 14x1.5 thread can also be used. You can find this adapter in the "Nozzles" category under the ZP-12-24V button.

Technical data:

Flow rate 0.8 l/min

Continuously adjustable operating pressure 1-5 bar

Self-priming up to 3 m height

Continuous current 4.6 A and 23.7 A starting current

Thread 1/8 internal thread

Approved media: vegetable oil, diesel and mineral oils

Operating temperature up to 80 ° C

max inlet pressure +/- 0.5 bar

DC version 12 Volt nominal voltage

Fusing with 15 Amps

Protection class IP 65

Radio interference suppressed

Mounting is done by means of two rubberized stainless steel pipe clamps with M 8 thread. You can find these in the "Accessories" category.

Dimensions:

Total length with plug: 22 cm

Motor diameter: 5.2 cm

Weight: 1125 g