Gear pump 24 Volt, 1-5 bar, 0.8 l/min, bypass, compact design

Gear pump 24 Volt, 1-5 bar, 0.8 l/min, bypass, small design

This pump is suitable for continuous operation with vegetable oil, for example as a pre-supply pump in trucks/tractors/CHP units. Special application as a gear pump for common rail and PD engines.

By arrangement, the pump also delivers brake fluid and antifreeze. Please contact us separately for the use of the aforementioned media.

The gear pump has a guaranteed service life of 8,000 - 10,000 operating hours, depending on the pressure operated.

An additional return outlet of the pump must be connected to the return line to the tank. This enables trouble-free operation.

A pre-filter is mandatory for warranty compliance. These filters can be found under the Filters category. For example, the filter shown, which is operated with banjo bolts. Instead of banjo bolts and eyelets, straight fittings with 14x1.5 thread can also be used.

The adapter shown has a 1/8 to 14x1.5 thread. This allows eyelets and banjo bolts to be attached to the pump outlets. Likewise, straight fittings with 14x1.5 thread can also be used. This adapter can be found in the Hoses category under the ZP-12-24V button.

Technical data:

Flow rate 0.8 l/min

Continuously adjustable operating pressure 1-5 bar

Self-priming up to 3 m height

Continuous current 2.3 A and 13.5 A starting current

Thread 1/8 internal thread

Approved media: vegetable oil, diesel and mineral oils

Operating temperature up to 80 ° C

max inlet pressure +/- 0.5 bar

DC version 24 volt nominal voltage

Fusing with 15 Ampere

Protection class IP 65

Radio interference suppressed

Mounting is done by means of two rubberized stainless steel pipe clamps with M 8 thread. These can be found in the Accessories category.

Dimensions:

Total length with plug: 22 cm

Motor diameter: 5.2 cm

Weight: 1125 g