Flat Suction Mat Set Drill Pump, Dry Self-Priming

Drill pump aluminum, dry self-priming, max 60 l/min, 4 bar, water, heat transfer fluids, cleaning agents, vegetable oils, flat suction mat set

This set is fully equipped for immediate use. You only need to attach your cordless drill, or drill, both with depth stop, to the pump.

With the hoses included in the set and the flat suction mat, you can pump the liquids to be extracted directly into the transport box.

This set is characterized by an almost complete pumping out of the liquid and can also be used on large areas.

For plumbers, dewatering pump sumps and lifting systems is now quick and easy.

The heating engineer completely sucks up puddles of water after maintenance work on boilers and hot water tanks in minutes.

Electricians also receive an almost wipe-dry floor covering after using the pump, which, for example, occurs in the event of leaks of all kinds (washing machines, dishwashers, condensate dryers).

The aluminum attachment pump for drills is dry self-priming and also offers the possibility of reversing the direction of rotation.

So it can suck and also push without changing the hoses.

This extremely lightweight universal impeller pump can be used wherever a dry self-priming pump is required for transferring.

By means of a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

The pump has a holder for fixing to a cordless drill, or drill with a drilling depth stop.

This assembly takes place without additional tools on your machine and is completed in one minute.

The impeller made of Perbunan is suitable for the following media:

Service water, seawater, vegetable oils, cleaning agents, solar system heat transfer fluids, antifreeze

Small solid particles can be conveyed in the impeller. The fluid must not contain abrasive substances.

Technical data:

Dry running time max. 1 minute

Flow rate max. 60 l/min (depending on the drive power of the drill or cordless drill used)

max. 4 bar (depending on the drive power of the drill or cordless drill used)

Minimum drive power 700 W

max. 2900 rpm

Self-priming max. 7 m height, dry 3 m height

Impeller Perbunan (NBR) well suited for reversing direction of rotation

Pump housing Aluminum Al Mg Si 1

Pump shaft stainless steel 1.4104 with 10 mm diameter

Holder for drilling depth stop

Thread 1 inch external thread on both sides

max. 60 °C media temperature

Scope of delivery set:

1 x impeller pump with holder for the depth stop

1 x flat suction mat with 1 inch external thread, 460 x 265 x 15

1 x hose 3 m length 1 inch internal thread on both sides, 3/4 inch hose inner diameter

1 x hose 3 m length 1 inch internal thread on one side, 3/4 inch hose inner diameter, other side for open outlet

1 x suction basket with 1 inch external thread

Transport box with lid 528x310x320mm

The cordless screwdriver shown is not included in the scope of delivery.

Weight 7.6 kg