Drill Pump Bronze, Self-priming, max 41.6 l/min, 1 inch male hose connections, Diesel, Heating Oil, Water

Drill pump Bronze, self-priming, max 41.6 l/min, 1 inch male thread, diesel, heating oil, water

Due to its design, the drill pump is dry-run safe and also offers the possibility of reversing the direction of rotation.
It can therefore suck and push without changing the hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped, then it is permanently self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil to various tanks.

Further possible applications include operation with diesel, or the transfer of lubricating oils, soaps and water.

Of course, diesel or heating oil tanks can be emptied with the pump.

The drill pump is also used for emptying or filling a waterbed.

Using a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water and bronze compatible liquids

The media to be pumped must not contain any abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents, etc., i.e. all operating fluids that require EX equipment.

Operating fluids that are viscous such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft for drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Flow rate (measured with water) max. 41.6 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then approaches zero)

Thread 1 inch external thread

Pump housing and impeller made of bronze, shaft stainless steel

2 mounting feet

Weight 977 g