Drill pump, bronze, self-priming, max 41.6 l/min, 1 inch internal thread, diesel, heating oil, water

Bronze drill pump, self-priming, max 41.6 l/min, 1 inch IG, diesel, heating oil, water

The drill pump's design allows for dry-running and also offers the option of reversing the direction of rotation.
Thus, it can both suction and discharge without changing hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped; then it is continuously self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil into various tanks.

Further applications include operating with diesel or transferring lubricating oils, soaps, and water.

Of course, diesel or heating oil tanks can be emptied with the pump.

The drill pump is also used for emptying or filling a waterbed.

Using a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water, and bronze-compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents, etc., i.e., all operating fluids that require EX equipment.

Operating fluids that are viscous such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft for drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Flow rate (measured with water) max. 41.6 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then goes to zero)

Thread 1 inch internal thread

Pump housing and impeller made of bronze, stainless steel shaft

2 mounting feet

Weight 977 g