Drill Pump Bronze, self-priming, max. 25 l/min, 3/4" male thread, Diesel, Heating Oil, Water

Bronze Drill Pump, self-priming, max. 25 l/min, 3/4" male thread, diesel, heating oil, water

Due to its design, the drill pump is dry-running safe and also offers the possibility of reversing the direction of rotation.
This means it can suck and pump without changing hoses.

The metal pump attachment for drills must be filled once with the medium to be pumped; then it is continuously self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil into various tanks.

Other applications include operation with diesel, or the transfer of lubricating oils, soaps, and water.

Of course, the pump can be used to empty diesel or heating oil tanks.

The drill pump is also used for emptying or filling a waterbed.

Using a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water and bronze-compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

Max. temperature 34 Cº

Prohibited media:

Petrol, acetone, solvents, etc., i.e., all operating fluids that require EX equipment.

Operating fluids that are viscous, such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft for drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry run max. 30 seconds

Flow rate (measured with water) max. 25 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (at which point the performance approaches zero)

Thread 3/4 inch male thread

Pump housing and impeller made of bronze, stainless steel shaft

2 mounting feet

Weight 928 g