Drill Pump Bronze, self-priming, max 41.6 l/min, 25 mm spouts, diesel, heating oil, water

Drill pump bronze, self-priming, max 41.6 l/min, 25 mm nozzles, diesel, heating oil, water

Due to its design, the drill pump is dry-run safe and also offers the possibility of reversing the direction of rotation.
Thus, it can suck and pump without changing hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped; then it is continuously self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil into various tanks.

Other possible applications include operation with diesel, or transferring lubricating oils, soaps and water.

Of course, the pump can be used to empty diesel or heating oil tanks.

The drill pump is also used for emptying or filling a waterbed.

With a cordless drill and this pump, it can be used as a bilge pump on a boat in case of power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water and bronze-compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Prohibited media:

Petrol, acetone, solvents etc., i.e., all operating fluids that require EX equipment.

Viscous operating fluids such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft journal for drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Flow rate (measured with water) max. 41.6 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the performance then goes to zero)

Thread 1 inch external thread with 25 mm hose nozzles for 1 inch water hose/garden hose

Pump housing and impeller made of bronze, stainless steel shaft

2 mounting feet

Weight 977 g