Drill Pump Bronze, self-priming, max. 25 l/min, 19 mm nozzles, diesel, heating oil, water

Drill pump bronze, self-priming, max. 25 l/min, 19 mm hose nozzles, diesel, heating oil, water

Due to its design, the drill pump is dry-running safe and also offers the possibility of reversing the direction of rotation.
This means it can suck and pump without changing the hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped; it is then permanently self-priming as liquid always remains in the pump.

This pump is suitable, for example, for transferring heating oil into various tanks.

Further applications include operation with diesel, or the transfer of lubricating oils, soaps and water.

Of course, diesel or heating oil tanks can be emptied with the pump.

The drill pump can also be used to empty or fill a waterbed.

By means of a cordless drill and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Diesel, vegetable oil, lubricating oil, soaps, water and bronze-compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents etc., i.e. all operating fluids that require EX equipment.

Operating fluids that are viscous like honey, pastes etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft journal for the drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry run max. 30 seconds

Flow rate (measured with water) max. 25 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then goes towards zero)

Thread 3/4 inch male with 19 mm hose nozzles for 3/4 inch water hose/garden hose

Pump housing and impeller made of bronze, shaft stainless steel

2 pieces of mounting feet

Weight 928 g