Drill pump, stainless steel, self-priming, max 41.6 l/min, 1 inch male thread, diesel, food, water

Drill pump stainless steel, self-priming, max 41.6 l/min, 1 inch male thread, diesel, food, water

Due to its design, the drill pump is dry-run safe and also offers the possibility of reversing the direction of rotation.
It can therefore suck and discharge without changing the hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring wine into various tanks.

Further applications include operation with beer, or transferring food, soaps, and drinking water.

Of course, diesel or heating oil tanks can be emptied with the pump.

Using a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Food, diesel, vegetable oil, lubricating oil, soaps, water, and stainless steel compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents, etc., i.e., all operating fluids that require EX equipment.

Operating fluids that are viscous, such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft for drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry run max. 30 seconds

Delivery rate (measured with water) max. 23 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then goes to zero)

Thread 1 inch male thread

Pump housing, impeller, shaft made of stainless steel

2 mounting feet

Weight 2 kg