Drill pump stainless steel, self-priming, max 41.6 l/min, 1 inch female thread, diesel, food, water

Drill pump, stainless steel, self-priming, max 41.6 l/min, 1 inch IG, diesel, food, water

Due to its design, the drill pump is dry-running safe and also offers the possibility of reversing the direction of rotation.
It can therefore suck and push without changing the hoses.

The metal drill attachment pump must be filled once with the medium to be pumped, after which it is permanently self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for decanting wine into different tanks.

Further applications include operation with beer, or the decanting of food, soaps and drinking water.

Of course, diesel or heating oil tanks can be emptied with the pump.

By means of a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in the event of a power failure.

Approved media:

Food, diesel, vegetable oil, lubricating oil, soaps, water and stainless steel compatible liquids

The media to be conveyed must not contain any abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Petrol, acetone, solvents etc., i.e. all operating fluids that require EX equipment.

Operating fluids that are viscous such as honey, pastes etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft journal for the drill or cordless screwdriver 9 mm

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Flow rate (measured with water) max. 41.6 l/min

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then goes to zero)

Thread 1 inch IG

Pump housing, impeller, shaft made of stainless steel

2 mounting feet

Weight 2 kg