Drill Pump Stainless Steel, self-priming, max 41.6 l/min, 25 mm hose nozzles, food, water

Drill pump stainless steel, self-priming, max 41.6 l/min, 25 mm hose nozzles, food, water

Due to its design, the drill pump is dry-running safe and also offers the possibility of reversing the direction of rotation.
This means it can suck and pump without changing hoses.

The metal attachment pump for drills must be filled once with the medium to be pumped; after that, it is permanently self-priming, as liquid always remains in the pump.

This pump is suitable, for example, for transferring wine to different tanks.

Other possible uses include operation with beer, or the transfer of food, soaps, and drinking water.

Of course, the pump can be used to empty diesel or heating oil tanks.

Using a cordless screwdriver and this pump, it can be used as a bilge pump on a boat in case of a power outage.

Approved media:

Food, diesel, vegetable oil, lubricating oil, soaps, water and stainless steel compatible liquids

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

Density max. 1.1 g/cm3

max. temperature 34 Cº

Forbidden media:

Gasoline, acetone, solvents, etc., i.e., all operating fluids that require EX equipment.

Operating fluids that are viscous such as honey, pastes, etc., max. viscosity comparable to mineral oil SAE 30 at 30 Cº.

Technical data:

Shaft journal for drill, or cordless screwdriver 9 mm

Flow rate (measured with water) max. 41.6 l/min

Speed 1500 - 3000 rpm

Dry running max. 30 seconds

Self-priming max. 6 m height

Delivery head max. 24 m (whereby the output then goes to zero)

Thread 1 inch male thread with 25 mm hose nozzles for 1 inch water hose/garden hose

Pump housing, impeller, shaft made of stainless steel

2 mounting feet

Weight 2 kg