AdBlue pump 230 Volt, 35 l/min, automatic nozzle plastic, digital counter, filter

Adblue pump 230 Volt, 35 l/min, automatic nozzle plastic, digital counter, filter

With this AdBlue refueling set, efficient refueling with AdBlue from a 1000 l IBC is possible.

As can be seen in the example photo, the unit can be hung on the AdBlue filled IBC.

The remaining amount of AdBlue from the gun runs into a collecting container, keeping the workplace clean.

This set is complete and ready to use.

The diaphragm pump used is used to refuel Euro 5/6 vehicles with the urea solution AdBlue.

When the AdBlue nozzle is closed, the pump's integrated bypass works, enabling trouble-free tank operation.

The materials used for the pump parts that come into contact with AdBlue are specifically designed for the urea solution.

The AdBlue pump must be protected from frost, as AdBlue will then crystallize and damage the pump.

If the pump is not used for longer than 15 days, the pipe system and the pump must be flushed with water.

Set contents:

Stainless steel bracket for pump mounting

AdBlue pump 230 volts

AdBlue automatic nozzle in plastic with break-away system and stainless steel nozzle

AdBlue counter digital

Mounting for AdBlue ibc

CDS clutch

intake hose

Dispensing hose 6 m

Small parts

Technical data:

max 35 l/min

max 1.5 bar

Suction height max 2 m

EPDM membrane

Motor 230 Volt 50 HZ Rated power 0.4 kW, Rated current (AC) 1.95 A

Switch ON OFF

Interval operation of max. 20 min continuous operation