Impeller Pump 12 Volt, 30 l/min, 5 bar, Perbunan Impeller, water, cleaning agents, heat transfer fluids, vegetable oils

Impeller Pump 12 Volt, 30 l/min, 5 bar, Perbunan Impeller, Water, Detergents, Heat Transfer Fluids, Vegetable Oils

This pump is suitable for pumping water, heating oil, oils, detergents, and solar system heat transfer fluids.

Solids may be pumped with the media as long as they fit between the impeller blades and are not abrasive. A version for pumping media with abrasive components is available upon request.

The pump is dry self-priming up to 3 m depth, otherwise up to 7 m.

The dry running time for this pump type is a maximum of 1 minute.

Technical Data:

Flow rate max 30 l/min

max. 5 bar

Self-priming max 7 m height, dry 3 m height

Impeller Perbunan® (NBR), Bushing material Polyamide

Pump housing material Aluminum EN AW-6060/AC-43400 with pump bracket

Pump shaft Stainless steel 1.4104

Threaded nozzles 3/4 inch external thread

The Perbunan impeller is suitable for the following media:

Service water, vegetable oils, detergents, solar system heat transfer fluids, antifreeze

Small solid particles can be conveyed with the impeller.

The fluid must not contain abrasive substances.

Motor 0.35 kW to 0.5 kW, depending on motor speed

DC version 12 Volt nominal voltage

Speed 1500 rpm 39 A, or optionally 3000 rpm 42 A

Rotation direction left/right

Electrical connection terminal block

Protection class IP 44

Operating mode S2, max. 30 min operating time, then appropriate cooling phase

Weight 9.2 kg

Weight 9 kg