Side channel pump, 12 volts, max. 25 l/min, max. 1 bar, bronze, water, sea water, diesel

Side channel pump, 12 volts, max. 25 l/min, max. 1 bar, bronze, water, sea water, diesel

Due to its operating principle, the side channel pump is protected against dry running for short periods.

The side channel pump must be filled once with the medium to be pumped; then it is permanently self-priming, as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.

This also applies if a long horizontal distance has to be overcome.

This pump type offers further design advantages:

the intake of air is possible without damage to the wings

there is no contact between medium and motor

low speed with high liter power

This side channel centrifugal pump is suitable for transferring water, sea water, heating oil or diesel into various tanks.

Approved media:

Water, sea water, vegetable oil, diesel, heating oil

The media to be pumped must not contain any abrasive substances.

In this case, the pump must be equipped with a suitable filter.

The viscosity must not exceed 100 cSt.

The media temperature must be below 70 ° C.

Technical data:

Version 12 Volt DC, nominal voltage, suitable for continuous operation

Rated power 0.3 KW, rated current 26 A

Electrical connection terminal board, without cable and plug

max. 25 l/min flow rate (measured with water)

2000 rpm

max. pressure 1 bar

Self-priming, filled max. 7 m height

Pump housing and impeller made of bronze

Motor shaft material: stainless steel AISI 316

Perbunan shaft seal

Hose connection 3/4 inch external thread

5.7 kg