Side channel pump 12 Volt stainless steel self-priming, max. 26 l/min

Side channel pump 12 Volt stainless steel self-priming, max. 26 l/min Due to its design, the pump is dry-run safe. The side channel pump must be filled once with the medium to be conveyed; after that, it is permanently self-priming, as liquid always remains in the pump. The pump type offers further design advantages:

• air suction is possible without damage to the impellers
• escape of the medium is prevented
• no contact between medium and motor
• low speed at high liter output
• due to the distance between pump housing and motor, little medium temperature is transferred to the motor

This pump is suitable, for example, for transferring foodstuffs into different tanks when only 12-volt on-board voltage is available. Optionally, you can get the illustrated mounting plate for all red side channel pumps. This frame facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation. Approved media: Food of all kinds, such as milk, wine, oil, fruit juices Seawater, liquid fertilizers, and corrosive chemicals The media to be conveyed must not contain abrasive substances. In this case, the pump must be equipped with a suitable filter. Forbidden media: Gasoline, acetone, solvents, etc., i.e., all operating fluids that require EX equipment. The viscosity must not be higher than max. 30 mm²/s. The media temperature must be below 36 °C. Technical data: Flow rate (measured with water) max 26 l/min max. 24 m head Self-priming max. 6 m height Threaded nozzles 3/4 inch, 19 mm Pump housing and impeller made of stainless steel, shaft stainless steel, AISI 304 Motor 0.37 kW 25 A 350 Watt Protection class IP X 4 1700 rpm DC 12 Volt DC nominal voltage version 72 dB Dimensions: 230 x 120 x 190 mm Weight: 6 kg