Side channel pump, 400 volts, bronze, 120 l/min, self-priming, reversible direction of rotation

Side channel pump, 400 Volt, bronze, 120 l/min, self-priming, reversible direction

The side channel centrifugal pump has a switch for reversing the direction of rotation.

This means it can suck and pump without changing hoses.

Due to its functional principle, the side channel pump is short-term dry-run safe.

The side channel pump must be filled once with the medium to be pumped, after which it is permanently self-priming, as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is indicated.

This also applies if a long horizontal distance has to be overcome.

Optionally available with the pump are the depicted disassemblable transport trolley and a manual bypass.

The trolley facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses during stationary operation.

The pump type offers further constructive advantages:

air suction is possible without damage to the impellers

there is no contact between the medium and the motor

low speed with high liter output

This pump is suitable, for example, for transferring water, heating oil, or diesel into various tanks.

Approved media:

Water, seawater, wine, vegetable oil, diesel, heating oil

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

The viscosity must not exceed max. 100 cSt.

The medium temperature must be below 70 °C. (optional with Viton seal up to max.)

Technical data:

Three-phase version 400 Volt nominal voltage, nominal power 0.75 kW, nominal current (AC) 3.64 A

max. 120 l/min delivery rate (measured with water)

max. pressure 2.2 bar

Self-priming max. 6 m height

Pump housing and impeller made of bronze

Motor shaft stainless steel AISI 316

Shaft seal NBR (Viton on request)

Hose connection 11/2 inch external thread

1400 rpm

15.7 kg