Side channel pump, 230 Volt, bronze, 120 l/min, self-priming, reversible, Viton

Side channel pump, 230 Volt, bronze, 120 l/min, self-priming, reversible direction, Viton

The pump has a switch for reversing the direction of rotation.

This means it can both suction and discharge without changing hoses.

The side channel pump is temporarily dry-run safe due to its operating principle.

The side channel pump must be filled once with the medium to be pumped; then it is continuously dry self-priming, as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 6 meters, a check valve should be used.

This also applies if a long horizontal distance has to be overcome.

Optionally with the pump, you receive the depicted disassemblable transport cart, or the carrying frame.

This cart facilitates the use of mobile pumps and provides appropriate support for the pump with attached hoses in stationary operation.

Furthermore, this pump can also optionally be equipped with an adjustable bypass, see example photo.

The pump type offers further constructive advantages:

air intake is possible without damage to the impellers

no contact occurs between the medium and the motor

low speed with high liter output

This pump is suitable, for example, for transferring water, heating oil, or diesel into various tanks.

Approved media:

water, seawater, wine, vegetable oil, diesel, heating oil

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

The viscosity must not exceed max. 100 cSt.

The media temperature must be below 120 °C.

Technical data:

Version three-phase 230 Volt nominal voltage, nominal power 0.75 kW, nominal current (AC) 5.3 A

max. 120 l/min delivery rate (measured with water)

max. pressure 2.2 bar

Self-priming max. 6 m height

Pump housing and impeller made of bronze

Seal Viton

Hose connection 11/2 inch external thread

1400 rpm

16.2 kg