Side channel pump, 230 Volt, stainless steel, self-priming, adjustable bypass 14 to 28 l/min

Side channel pump, 230 Volt, stainless steel, self-priming, adjustable bypass 14 to 28 l/min

Side channel pump with 230 Volt, max. 28 l/min and reversible direction of rotation.

The special feature of this pump is the controllable manual bypass. The flow rate can thus be continuously regulated from 13 to 28 l/min.

Due to its functional principle, the side channel pump is dry-running safe and also offers the possibility of reversing the direction of rotation.

So it can suck and pump without changing hoses.

The switch for this is embedded in the electrical housing and allows for easy operation.

The side channel pump must be filled once with the medium to be pumped, then it is continuously self-priming, as liquid always remains in the pump.

Since this side channel pump is operated with a bypass, this valve must be closed when the pump is filled for the first time.

If the height difference between the pump axis and the liquid level is more than 3 meters, the use of a check valve is recommended.

This also applies if a long horizontal distance has to be overcome.

Optionally, you can get the mounting plate shown for all red side channel pumps.

This frame facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation.

The pump type offers further constructive advantages:

air can be sucked in without damaging the impellers
no contact between medium and motor
low speed at high flow rate

This pump is suitable, for example, for transferring olive oil into various tanks.

Further applications include operation in the filtration of wine and beer, or the transfer of lubricating oils, soaps and water.

Technical data:

Flow rate (measured with water)

28 l/min - discharge head 1 m
14 l/min - discharge head 14 m

max discharge head 25 m

Approved media:

Water, wine, must, beer, vinegar, food, vegetable oil, diesel, lubricating oil, soaps, seawater and stainless steel/NBR compatible liquids

The media to be pumped must not contain abrasive substances. In this case, the pump must be equipped with a suitable filter.

The viscosity must not exceed max. 30 mm²/s.

The medium temperature must be below 36 °C.

Technical data:

AC version 230 Volt nominal voltage

Flow rate min. 13 l/min - max 28 l/min

max 2 bar

Self-priming max. 9 m height with check valve and full suction hose

Self-priming max. 4 m height without accessories

Pump housing and impeller made of stainless steel, stainless steel shaft, AISI 304

NBR seals with stainless steel spring

Stainless steel threaded nozzles 3/4 inch internal thread with 20 mm hose connection

2850 rpm

Motor 0.37 kW and 1.8 A

IP 44

70 dB

5 kg

Dimensions:

320 x 150 x 180 mm