Side channel pump, 230 volts, max. 28 l/min, max. 95 °C, Viton, self-priming

Side channel pump, 230 Volt, max. 28 l/min, max. 95 ° C, Viton, self-priming

Side channel pump with 230 volts, max. 28 l/min and reversible rotation.

The special feature of this pump is its ability to convey liquids up to a maximum temperature of 95 ° C in continuous operation.

The SK-230-28-VA-Viton must not be used for hot water circulation in domestic heating systems. The pump is not to be considered a hot water circulation pump.

Due to its functional principle, the side channel pump is dry-running safe and also offers the possibility of reversing the direction of rotation.

This means it can suck and pump without changing hoses.

The switch for this is embedded in the electrical housing and allows for easy operation.

The side channel pump must be filled once with the medium to be conveyed; it then remains continuously self-priming as liquid always remains in the pump.

If the height difference between the pump axis and the fluid level is more than 3 meters, the use of a check valve is advisable.

This also applies if a long horizontal distance has to be overcome.

Optionally with the pump, you receive the illustrated mounting plate for all red side channel pumps.

This frame facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation.

The pump type offers further design advantages:

air can be drawn in without damaging the impellers
no contact between medium and motor
low speed with high liter output

Technical data:

Flow rate (measured with water)

28 l/min - head 1 m

max head 27 m

Approved media:

Water, wort, wine, must, beer, vinegar, food, vegetable oil, soaps, and stainless steel/brass/Viton compatible liquids

The media to be conveyed must not contain abrasive substances or impurities.

The viscosity must not be higher than max. 30 mm²/s.

The medium temperature must be below 95 ° C.

Technical data:

AC version 230 Volt nominal voltage

1.50 m long connection cable with Schuko plug

Flow rate min. 5 l/min - max 28 l/min

max 2.7 bar

Pump housing made of stainless steel, impeller brass, shaft stainless steel, AISI 304

Viton seals with stainless steel spring

Stainless steel threaded nozzles 3/4 inch female thread with 20 mm hose connection

2850 U/min

Motor 0.37 kW and 1.8 A

IP 44

69 dB

Dimensions:

230 x 120 x 190 mm

5 kg