Wort Pump, Beer Pump, 230 Volt, max. 28 l/min, max. 95 °C, Viton, self-priming

Wort pump, beer pump, 230 Volt, max 28 l/min, max. 95 ° C, Viton, self-priming

Side channel pump with 230 Volt, max. 28 l/min and reversible rotation.

The special feature of this pump is its ability to convey liquids up to a maximum temperature of 95 ° C in continuous operation.

The SK-230-28-VA-Viton-B must not be used for hot water circulation in domestic heating systems. The pump is not to be considered a hot water circulation pump.

Due to its functional principle, the side channel pump is dry-run safe and also offers the option of reversible rotation.

This means it can suck and pump without changing hoses.

The switch for this is embedded in the electrical housing and allows for easy operation.

The side channel pump must be filled once with the medium to be conveyed; it is then continuously self-priming as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 3 meters, a check valve is recommended.

This also applies if a long horizontal distance has to be overcome.

Optionally, you can get the illustrated mounting plate for all red side channel pumps.

This frame facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation.

The pump type offers further constructive advantages:

air suction is possible without damage to the impellers
there is no contact between the medium and the motor
low speed with high liter output

An application example is its use as a wort pump in the production of home-brewed beer. Naturally, also in other processes where hot liquid needs to be transferred.

Technical data:

Flow rate (measured with water)

28 l/min - head 1 m

max head 27 m

Approved media:

Water, wort, wine, must, beer, vinegar, food, vegetable oil, soaps and stainless steel/brass/Viton compatible liquids

The media to be conveyed must not contain abrasive substances or impurities.

Viscosity must not be higher than max. 30 mm²/s.

The medium temperature must be below 95 ° C.

Technical data:

AC version 230 Volt nominal voltage

1.50 m long supply cable with Schuko plug

Flow rate min. 5 l/min - max 28 l/min

max 2.7 bar

Pump housing stainless steel, impeller brass, shaft stainless steel, AISI 304

Viton seals with stainless steel spring

Threaded nozzles stainless steel 3/4 inch internal thread with 20 mm hose connection

2850 rpm

Motor 0.37 kw and 1.8 A

IP 44

69 dB

5 kg

Dimensions:

230 x 120 x 190 mm