Plate Filter for Wine, Stainless Steel, Filtration Capacity 3.3 - 5 l/min, 6 Plates 20 x 20 cm

Layer Filter Wine Pump, Stainless Steel, Filter Capacity 3.3 - 5 l/min, 6 Plates 20 x 20 cm

Special features of this pump are its low pressure and low speed.

This enables gentle filtration - pumping of high-quality food products.

The filter's capacity consists of 6 plastic support plates for 6 filter layers. For operation, at least 2 filter layers with 3 plates are necessary.

The two outer filter plates, as well as the frame, are made of stainless steel.

The required original filter papers can be obtained from us under the category Filters - Layer Filters/Wine Pump in various filtration finenesses.

The wine filter system is assembled and ready for operation. You only need to install your suction hose and pressure hose.

Of course, the pump can also be used alone, without the filter, for transferring liquids. For example, for transferring wine to different tanks.

The depicted carrying handle is attached with a screw and can be easily dismantled.

Due to its design, the pump is dry-running safe and also offers the possibility of reversing the direction of rotation. It can therefore suck and push without changing the hoses. The switch for this is embedded in the electrical housing and allows for easy operation.

The side channel pump must be filled once with the medium to be pumped, after which it is permanently self-priming, as liquid always remains in the pump.

The pump type offers further design advantages:

suction of air is possible without damage to the impellers
escape of the medium is impossible
there is no contact between the medium and the motor
low speed with high liter output

Further applications include operation in the filtration of wine, beer, spirits, or fruit juices.

When processing pure alcohol, the alcohol content may not exceed 10 %.

You can also see our 19 mm silicone hose, food-safe, pictured. This silicone hose is resistant to max. + 200° C and suitable for alcoholic beverages up to 90 % alcohol content in the food sector.

You can find this hose under the category Hoses - Food Hoses.

Approved media:

Wine, beer, spirits, vegetable oil, fruit juice, water

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable pre-filter.

The viscosity must not be higher than max. 30 mm²/s.

The medium temperature must be below 36 ° C.

Technical data:

AC version 230 Volt rated voltage

Flow rate max 28 l/min at free outlet without layer filter

28 l/min - discharge head 1 m
17 l/min - discharge head 10 m
max discharge head 25 m

Flow rate with layer filter approx. 3.3 - 5 l/min

Self-priming 6 m height

Pump housing, shaft, and impeller stainless steel

Seals NBR

Hose nozzles 3/4 inch 19 mm

2850 rpm

Motor 0.37 kW and 1.8 A

69 dB

5 kg pump with filter 15 kg

Dimensions:

320 x 150 x 180 mm pump

400 x 270 x 280 mm pump with filter frame