Layer Filter Beer Pump, Stainless Steel, Filtration Capacity 1.6 - 2.5 l/min, 10 Plates 20 x 10 cm

Layer filter beer pump, stainless steel, filter capacity 1.6 - 2.5 l/min, 10 plates 20 x 10 cm

Special features of this pump are its low pressure and low speed.

This allows for gentle filtration - pumping of high-quality food products.

The filter's capacity consists of 10 plastic support plates for 10 filter layers. At least 2 filter layers with 3 plates are required for operation.

The required original filter papers can be purchased from us under the category Filters - Layer filters/Wine pump in various filtration finenesses.

The beer filtering system is assembled and ready for operation. You only need to install your suction hose and pressure hose.

You can find the suitable food-grade silicone hose with 10 mm inner diameter and 3 mm wall thickness under the button Hoses/Food products.

The strong wall thickness of 3 mm prevents the silicone hose from kinking on the 10 mm hose nozzle.

The hose holds without clamps on the conical hose nozzles.

However, to avoid possible loosening during the filtering process, it is advisable to use our 14 mm hose clamps.

Of course, the pump can also be used alone, without the filter, for transferring liquids. For example, for transferring beer into different tanks.

Due to its design, the pump is dry-run safe.

The side channel pump must be filled once with the medium to be pumped; it will then be continuously self-priming, as liquid always remains in the pump.

The pump type offers further constructive advantages:

air intake is possible without damage to the impellers
escape of the medium is impossible
there is no contact between the medium and the motor
low speed with high liter output

Further applications include operation in the filtration of wine, beer, spirits or fruit juices.

The illustrated food-grade hose with 10 mm inner diameter is optionally available.

You can find this product under the Hoses button.

Approved media:

Wine, beer, spirits, vegetable oil, fruit juice, water

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable pre-filter.

The viscosity must not be higher than max. 30 mm²/s.

The medium temperature must be below 36 °C.

Technical data:

AC version 230 volts nominal voltage

Flow rate max 7 l/min with free outflow without layer filter

Flow rate with layer filter approx. 1.6 - 2.5 l/min

max 1 bar

Self-priming 6 m height

Pump housing, shaft and impeller made of stainless steel

NBR seals

rigid hose nozzles cast with the housing, conical min 10 mm

2850 rpm

Motor 0.3 kW and 1.1 A

69 dB

4 kg pump with filter 12 kg

Dimensions:

210 x 120 x 190 mm pump

400 x 270 x 250 mm pump with filter frame