Sheet filter wine pump, stainless steel, filter capacity 1.6 - 2.5 l/min, 10 plates 20 x 10 cm

Layer Filter Wine Pump, Stainless Steel, Filter Capacity 1.6 - 2.5 l/min, 10 Plates 20 x 10 cm

Special features of this pump are its low pressure and low speed.

This allows for gentle filtration - pumping of high-quality food products.

The filter's capacity consists of 10 plastic support plates for 10 filter layers. At least 2 filter layers with 3 plates are required for operation.

The necessary original filter papers can be purchased from us under the category Filters - Layer Filter/Wine Pump in various filter finenesses.

The wine filter system is assembled and ready for operation. You only need to install your suction hose and pressure hose.

The suitable food-grade silicone hose with 10 mm inner diameter and 3 mm wall thickness can be found under the button Hoses/Food Products.

The strong wall thickness of 3 mm prevents the silicone hose from kinking on the 10 mm hose nozzle.

The hose holds onto the conical hose nozzles without clamps.

However, to prevent a possible loosening during the filtering process, it is advisable to use our 14 mm hose clamps.

Of course, the pump can also be used alone, without the filter, for transferring liquids. For example, for transferring wine into different tanks.

Due to its design, the pump is dry-running safe.

The side channel pump must be filled once with the medium to be pumped; then it is continuously self-priming, as liquid always remains in the pump.

The pump type offers further constructive advantages:

suction of air is possible without damage to the impellers
escape of medium is excluded
there is no contact between medium and motor
low speed with high liter output

Further applications include operation in the filtration of wine, beer, spirits, or fruit juices.

Approved media:

Wine, beer, spirits, vegetable oil, fruit juice, water

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable pre-filter.

The viscosity must not be higher than max. 30 mm²/s.

The medium temperature must be below 36 °C.

Technical data:

AC version 230 Volt rated voltage

Flow rate max 7 l/min at free discharge without layer filter

Flow rate with layer filter approx. 1.6 - 2.5 l/min

max 1 bar

Self-priming 6 m height

Pump housing, shaft and impeller made of stainless steel

Seals NBR

rigid hose nozzles cast with the housing, conical min 10 mm

2850 rpm

Motor 0.3 kW and 1.1 A

69 dB

4 kg pump, with filter 12 kg

Dimensions:

210 x 120 x 190 mm pump

400 x 270 x 250 mm pump with filter frame