Side channel pump 24 Volt stainless steel self-priming, max. 26 l/min

Side channel pump 24 volt stainless steel self-priming, max. 26 l/min The pump is dry-running safe due to its design. The side channel pump must be filled once with the medium to be pumped, after which it is permanently self-priming, as liquid always remains in the pump. The pump type offers further constructive advantages:

• air can be sucked in without damage to the impellers
• escape of the medium is impossible
• there is no contact between medium and motor
• low speed with high liter output
• due to the distance between pump housing and motor, only a small amount of medium temperature is transferred to the motor

This pump is suitable, for example, for transferring food into different tanks if only 24 volts on-board voltage is available. Optionally for the pump, you can get the pictured mounting plate for all red side channel pumps. This frame facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses during stationary operation. Approved media: All types of food, such as feed syrup, milk, wine, oil, fruit juices Seawater, liquid fertilizers and corrosive chemicals The media to be pumped must not contain any abrasive substances. In this case, the pump must be equipped with a suitable filter. Forbidden media: Petrol, acetone, solvents, etc., i.e. all operating fluids that require EX equipment. The viscosity must not be higher than max. 30 mm²/s. The medium temperature must be below 36 °C. Technical data: Flow rate (measured with water) max 26 l/min max. 24 m delivery head Self-priming max. 6 m height Threaded nozzles 3/4 inch, 19 mm Pump housing and impeller made of stainless steel, shaft made of stainless steel, AISI 304 Motor 0.37 kW max. 22 A at free flow in operation 16 - 18 A Protection class IP X 4 1700 rpm Version DC 24 volt DC nominal voltage 78 dB Dimensions: 230 x 120 x 190 mm Weight: 6 kg