Side channel pump, 400 volts, bronze, 120 l/min, self-priming, reversible direction of rotation

Side channel pump, 400 Volt, bronze, 120 l/min, self-priming, reversible direction

The pump has a switch for reversing the direction of rotation.

This means it can suction and discharge without changing the hoses.

Due to its functional principle, the side channel pump is temporarily dry-run safe.

The side channel pump must be filled once with the medium to be pumped, after which it is permanently self-priming, as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.

This also applies if a long horizontal distance has to be overcome.

Optionally, you can get the pictured collapsible transport cart with the pump.

This cart facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation.

The pump type offers further design advantages:

air can be sucked in without damaging the impellers

there is no contact between the medium and the motor

low speed with high flow rate

This pump is suitable, for example, for transferring water, heating oil, or diesel into various tanks.

Approved media:

Water, seawater, wine, vegetable oil, diesel, heating oil

The media to be pumped must not contain abrasive substances.

In this case, the pump must be equipped with a suitable filter.

The viscosity must not exceed max. 100 cSt.

The media temperature must be below 70 °C.

Technical data:

Three-phase version 400 Volt nominal voltage, nominal power 0.75 kW, nominal current (AC) 3.64 A

max. 120 l/min flow rate (measured with water)

max. pressure 2.2 bar

Self-priming max. 6 m height

Pump housing and impeller made of bronze

Seal NBR (Viton on request)

Hose connection 11/2 inch external thread

1400 rpm

15.7 kg