Side channel pump, 400 Volt, bronze, 29 l/min, self-priming, reversible direction of rotation

Side channel pump, 400 Volt, bronze, 29 l/min, self-priming, reversible direction of rotation

The pump has a switch for reversing the direction of rotation.

This means it can suck and push without changing the hoses.

Due to its functional principle, the side channel pump is dry-run safe for a short period of time.

The side channel pump must be filled once with the medium to be conveyed, then it is permanently self-priming, as liquid always remains in the pump.

If the height difference between the pump axis and the liquid level is more than 6 meters, the use of a check valve is recommended.

This also applies if a long horizontal distance has to be overcome.

Optional to the pump, you can get the illustrated foldable transport trolley.

This trolley facilitates the use of mobile pumps and provides adequate support for the pump with attached hoses in stationary operation.

The pump type offers further constructive advantages:

air can be sucked in without damaging the impellers

there is no contact between the medium and the motor

low speed with high liter output

This pump is suitable, for example, for transferring water, heating oil or diesel into various tanks.

Approved media:

Water, seawater, wine, vegetable oil, diesel, heating oil

The media to be conveyed must not contain any abrasive substances.

In this case, the pump must be equipped with a suitable filter.

The viscosity must not be higher than max. 100 cSt.

The medium temperature must be below 70 ° C.

Technical data:

Three-phase version 400 Volt nominal voltage, nominal power 0.25 kW, nominal current (AC) 0.8 A

max. 29 l/min flow rate (measured with water)

max. pressure 1.5 bar

Self-priming max. 6 m height

Pump housing and impeller made of bronze

Seal NBR (Viton on request)

Hose connection 1 inch external thread

2800 U/min

6.3 kg