Here we see a newly installed Facet dura lift pump.
Even in winter, refrigerated trucks require transport refrigeration.
The diesel-powered refrigeration units are supplied with fuel by a Facet dura lift pump.
As shown in the picture, the pump is located under the refrigerated body.
However, thanks to their enormous suction power, these vibratory pumps can also be installed on top of the refrigerated body.
This pump is used wherever fuel has to overcome significant height differences from the tank to the consumer.
Besides refrigeration units, this is the case for motorboats with low-lying tanks, industrial applications, and emergency power generators.
The Dura Lift pump has a transparent sight glass with a built-in 80 micron stainless steel screen.
This allows for clear monitoring of the pump's function.
This pump has dry-running properties of up to 4 hours and is equipped with a check valve.
The illustrated Facet dura lift pump has the original connector to connect the pump to Carrier and Thermo King lines.
We also carry other Facet dura lift pumps, including 24-volt versions and those with different flow rates.
The original spare part, the Facet 40223, has the following technical specifications:
Version 12 V Flow rate 125 L/H Max pressure 0.79 bar Suction height 3 m self-priming Filter fineness 80 micron
Weight 1.1 kg Width approx. 82 mm, Height 180 mm, Mounting hole spacing 63 mm, for M6 screws
Approved media are unleaded petrol, diesel, heating oil Line connections 1/8-27 INT thread, conical
Operating temperature -31 to +55 C
Facet Dura-Lift Fuel Pump 40223 for Carrier Transicold and Thermo King Transport Refrigeration
